当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 5 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : 数字把我的字体搞糊涂了,求助
帖子发表于 : 2006-07-01 16:03 

注册: 2006-05-19 22:13
帖子: 2
送出感谢: 0 次
接收感谢: 0 次
我用ubuntu5.10

英文字体我喜欢用terminal(我把他放在fonts.conf的sans部分了),中文用文泉驿。

现在呢,当我输入纯数字时,他使用文泉驿字体(而不是我希望的terminal)显示(个人不喜欢文泉驿的英文字体)。(图1)

而当我紧接着又输入英文时,内容(包括刚才输入的数字)的字体全部变成terminal(图2),虽然这样好,但是用到纯数字的地方很多,我不希望出现2种英文字体。

我希望让纯数字也使用terminal,只有中文用文泉驿(像图3那样),怎么办呢?求助,先谢过了

我的/etc/fonts/fonts.conf如下:

<?xml version="1.0"?>
<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
<!-- /etc/fonts/fonts.conf file to configure system font access -->
<fontconfig>

<!--
DO NOT EDIT THIS FILE.
IT WILL BE REPLACED WHEN FONTCONFIG IS UPDATED.
LOCAL CHANGES BELONG IN 'local.conf'.

The intent of this standard configuration file is to be adequate for
most environments. If you have a reasonably normal environment and
have found problems with this configuration, they are probably
things that others will also want fixed. Please submit any
problems to the fontconfig bugzilla system located at fontconfig.org

Note that the normal 'make install' procedure for fontconfig is to
replace any existing fonts.conf file with the new version. Place
any local customizations in local.conf which this file references.

Keith Packard
-->

<!-- Font directory list -->

<dir>/usr/share/fonts</dir>
<dir>/usr/share/X11/fonts</dir> <dir>/usr/local/share/fonts</dir>
<dir>~/.fonts</dir>

<!--
Accept deprecated 'mono' alias, replacing it with 'monospace'
-->
<match target="pattern">
<test qual="any" name="family">
<string>mono</string>
</test>
<edit name="family" mode="assign">
<string>monospace</string>
</edit>
</match>

<!--
Accept alternate 'sans serif' spelling, replacing it with 'sans-serif'
-->
<match target="pattern">
<test qual="any" name="family">
<string>sans serif</string>
</test>
<edit name="family" mode="assign">
<string>sans-serif</string>
</edit>
</match>

<!--
Accept deprecated 'sans' alias, replacing it with 'sans-serif'
-->
<match target="pattern">
<test qual="any" name="family">
<string>sans</string>
</test>
<edit name="family" mode="assign">
<string>sans-serif</string>
</edit>
</match>

<!--
Mark common families with their generics so we'll get
something reasonable
-->

<!--
Serif faces
-->
<alias>
<family>Terminal</family>
<family>WenQuanYi Bitmap Song</family>
<family>AR PL SungtiL GB</family>
<default><family>serif</family></default>
</alias>
<!--
Sans-serif faces
-->
<alias>
<family>Terminal</family>
<family>WenQuanYi Bitmap Song</family>
<family>AR PL SungtiL GB</family>
<default><family>sans-serif</family></default>
</alias>
<!--
Monospace faces
-->
<alias>
<family>Terminal</family>
<family>WenQuanYi Bitmap Song</family>
<family>AR PL SungtiL GB</family>
<default><family>monospace</family></default>
</alias>
<!--
If the font still has no generic name, add sans-serif
-->
<match target="pattern">
<test qual="all" name="family" compare="not_eq">
<string>sans-serif</string>
</test>
<test qual="all" name="family" compare="not_eq">
<string>serif</string>
</test>
<test qual="all" name="family" compare="not_eq">
<string>monospace</string>
</test>
<edit name="family" mode="append_last">
<string>sans-serif</string>
</edit>
</match>

<!--
AMT provides metric and shape compatible fonts for these three web font
families.
-->
<alias>
<family>Times New Roman</family>
<accept><family>Thorndale AMT</family></accept>
</alias>
<alias>
<family>Arial</family>
<accept><family>Albany AMT</family></accept>
</alias>
<alias>
<family>Courier New</family>
<accept><family>Cumberland AMT</family></accept>
</alias>

<!--
Some Asian fonts misadvertise themselves as monospaced when
in fact they are dual-spaced (half and full). This makes
FreeType very confused as it forces all widths to match.
Undo this magic by disabling the width forcing code -->
<match target="font">
<test name="family"><string>GulimChe</string></test>
<edit name="globaladvance"><bool>false</bool></edit>
</match>

<match target="font">
<test name="family"><string>DotumChe</string></test>
<edit name="globaladvance"><bool>false</bool></edit>
</match>

<match target="font">
<test name="family"><string>BatangChe</string></test>
<edit name="globaladvance"><bool>false</bool></edit>
</match>

<match target="font">
<test name="family"><string>GungsuhChe</string></test>
<edit name="globaladvance"><bool>false</bool></edit>
</match>

<!--
The Bitstream Vera fonts have GASP entries suggesting that hinting be
disabled below 8 ppem, but FreeType ignores those, preferring to use
the data found in the instructed hints. The initial Vera release
didn't include the right instructions in the 'prep' table. Fix this
by disabling hinting manually at smaller sizes (< 8ppem)
-->

<match target="font">
<test name="family">
<string>Bitstream Vera Sans</string>
</test>
<test name="pixelsize" compare="less">
<double>7.5</double>
</test>
<edit name="hinting">
<bool>false</bool>
</edit>
</match>

<match target="font">
<test name="family">
<string>Bitstream Vera Serif</string>
</test>
<test name="pixelsize" compare="less">
<double>7.5</double>
</test>
<edit name="hinting">
<bool>false</bool>
</edit>
</match>

<match target="font">
<test name="family">
<string>Bitstream Vera Sans Mono</string>
</test>
<test name="pixelsize" compare="less">
<double>7.5</double>
</test>
<edit name="hinting">
<bool>false</bool>
</edit>
</match>

<!--
Load per-user customization file
-->
<include ignore_missing="yes">~/.fonts.conf</include>

<!--
Load local system customization file
-->
<include ignore_missing="yes">conf.d</include>
<include ignore_missing="yes">local.conf</include>

<!--
Provide required aliases for standard names
-->
<alias>
<family>serif</family>
<prefer>
<family>Terminal</family>
<family>WenQuanYi Bitmap Song</family>
<family>AR PL SungtiL GB</family>
</prefer>
</alias>
<alias>
<family>sans-serif</family>
<prefer>
<family>Terminal</family>
<family>WenQuanYi Bitmap Song</family>
<family>AR PL SungtiL GB</family>
</prefer>
</alias>
<alias>
<family>monospace</family>
<prefer>
<family>Terminal</family>
<family>WenQuanYi Bitmap Song</family>
<family>AR PL SungtiL GB</family>
</prefer>
</alias>

<!--
Artificial oblique for fonts without an italic or oblique version
-->

<match target="font">
<!-- check to see if the font is roman -->
<test name="slant">
<const>roman</const>
</test>
<!-- check to see if the pattern requested non-roman -->
<test target="pattern" name="slant" compare="not_eq">
<const>roman</const>
</test>
<!-- multiply the matrix to slant the font -->
<edit name="matrix" mode="assign">
<times>
<name>matrix</name>
<matrix><double>1</double><double>0.2</double>
<double>0</double><double>1</double>
</matrix>
</times>
</edit>
<!-- pretend the font is oblique now -->
<edit name="slant" mode="assign">
<const>oblique</const>
</edit>
</match>

<!--
Synthetic emboldening for fonts that do not have bold face available
-->

<match target="font">
<!-- check to see if the font is just regular -->
<test name="weight" compare="less_eq">
<int>100</int>
</test>
<!-- check to see if the pattern requests bold -->
<test target="pattern" name="weight" compare="more_eq">
<int>200</int>
</test>
<!-- set the embolden flag -->
<edit name="embolden" mode="assign">
<bool>true</bool>
</edit>
</match>


<config>
<!--
These are the default Unicode chars that are expected to be blank
in fonts. All other blank chars are assumed to be broken and
won't appear in the resulting charsets
-->
<blank>
<int>0x0020</int> <!-- SPACE -->
<int>0x00A0</int> <!-- NO-BREAK SPACE -->
<int>0x00AD</int> <!-- SOFT HYPHEN -->
<int>0x034F</int> <!-- COMBINING GRAPHEME JOINER -->
<int>0x0600</int> <!-- ARABIC NUMBER SIGN -->
<int>0x0601</int> <!-- ARABIC SIGN SANAH -->
<int>0x0602</int> <!-- ARABIC FOOTNOTE MARKER -->
<int>0x0603</int> <!-- ARABIC SIGN SAFHA -->
<int>0x06DD</int> <!-- ARABIC END OF AYAH -->
<int>0x070F</int> <!-- SYRIAC ABBREVIATION MARK -->
<int>0x115F</int> <!-- HANGUL CHOSEONG FILLER -->
<int>0x1160</int> <!-- HANGUL JUNGSEONG FILLER -->
<int>0x1680</int> <!-- OGHAM SPACE MARK -->
<int>0x17B4</int> <!-- KHMER VOWEL INHERENT AQ -->
<int>0x17B5</int> <!-- KHMER VOWEL INHERENT AA -->
<int>0x180E</int> <!-- MONGOLIAN VOWEL SEPARATOR -->
<int>0x2000</int> <!-- EN QUAD -->
<int>0x2001</int> <!-- EM QUAD -->
<int>0x2002</int> <!-- EN SPACE -->
<int>0x2003</int> <!-- EM SPACE -->
<int>0x2004</int> <!-- THREE-PER-EM SPACE -->
<int>0x2005</int> <!-- FOUR-PER-EM SPACE -->
<int>0x2006</int> <!-- SIX-PER-EM SPACE -->
<int>0x2007</int> <!-- FIGURE SPACE -->
<int>0x2008</int> <!-- PUNCTUATION SPACE -->
<int>0x2009</int> <!-- THIN SPACE -->
<int>0x200A</int> <!-- HAIR SPACE -->
<int>0x200B</int> <!-- ZERO WIDTH SPACE -->
<int>0x200C</int> <!-- ZERO WIDTH NON-JOINER -->
<int>0x200D</int> <!-- ZERO WIDTH JOINER -->
<int>0x200E</int> <!-- LEFT-TO-RIGHT MARK -->
<int>0x200F</int> <!-- RIGHT-TO-LEFT MARK -->
<int>0x2028</int> <!-- LINE SEPARATOR -->
<int>0x2029</int> <!-- PARAGRAPH SEPARATOR -->
<int>0x202A</int> <!-- LEFT-TO-RIGHT EMBEDDING -->
<int>0x202B</int> <!-- RIGHT-TO-LEFT EMBEDDING -->
<int>0x202C</int> <!-- POP DIRECTIONAL FORMATTING -->
<int>0x202D</int> <!-- LEFT-TO-RIGHT OVERRIDE -->
<int>0x202E</int> <!-- RIGHT-TO-LEFT OVERRIDE -->
<int>0x202F</int> <!-- NARROW NO-BREAK SPACE -->
<int>0x205F</int> <!-- MEDIUM MATHEMATICAL SPACE -->
<int>0x2060</int> <!-- WORD JOINER -->
<int>0x2061</int> <!-- FUNCTION APPLICATION -->
<int>0x2062</int> <!-- INVISIBLE TIMES -->
<int>0x2063</int> <!-- INVISIBLE SEPARATOR -->
<int>0x206A</int> <!-- INHIBIT SYMMETRIC SWAPPING -->
<int>0x206B</int> <!-- ACTIVATE SYMMETRIC SWAPPING -->
<int>0x206C</int> <!-- INHIBIT ARABIC FORM SHAPING -->
<int>0x206D</int> <!-- ACTIVATE ARABIC FORM SHAPING -->
<int>0x206E</int> <!-- NATIONAL DIGIT SHAPES -->
<int>0x206F</int> <!-- NOMINAL DIGIT SHAPES -->
<int>0x3000</int> <!-- IDEOGRAPHIC SPACE -->
<int>0x3164</int> <!-- HANGUL FILLER -->
<int>0xFEFF</int> <!-- ZERO WIDTH NO-BREAK SPACE -->
<int>0xFFA0</int> <!-- HALFWIDTH HANGUL FILLER -->
<int>0xFFF9</int> <!-- INTERLINEAR ANNOTATION ANCHOR -->
<int>0xFFFA</int> <!-- INTERLINEAR ANNOTATION SEPARATOR -->
<int>0xFFFB</int> <!-- INTERLINEAR ANNOTATION TERMINATOR -->
</blank>
<!--
Rescan configuration every 30 seconds when FcFontSetList is called
-->
<rescan>
<int>30</int>
</rescan>
</config>

</fontconfig>


附件:
文件注释: pic3
3.png
3.png [ 39.83 KiB | 被浏览 422 次 ]

文件注释: pic2
2.png
2.png [ 40.29 KiB | 被浏览 422 次 ]

文件注释: pic1
1.png
1.png [ 39.59 KiB | 被浏览 417 次 ]

页首
 用户资料  
 
2 楼 
 文章标题 :
帖子发表于 : 2006-07-01 17:14 
头像

注册: 2005-08-14 21:55
帖子: 58428
地址: 长沙
送出感谢: 4
接收感谢: 272
单独剔出数字部分,使用一种指定字体的,应该还作不到,至少是只动字体配置文件作不到。

知道的只有指定一种字体中没有的字符,使用另外一种字体的方法。
http://forum.ubuntu.org.cn/viewtopic.ph ... highlight=


_________________
● 鸣学


页首
 用户资料  
 
3 楼 
 文章标题 :
帖子发表于 : 2006-07-01 18:56 

注册: 2006-05-19 22:13
帖子: 2
送出感谢: 0 次
接收感谢: 0 次
eexpress 写道:
单独剔出数字部分,使用一种指定字体的,应该还作不到,至少是只动字体配置文件作不到。

知道的只有指定一种字体中没有的字符,使用另外一种字体的方法。
http://forum.ubuntu.org.cn/viewtopic.ph ... highlight=


我没有让数字使用单独字体,

我是说,你知道吧,terminal和wqy里面都有数字的字体,我为了让英文和数字用terminal,特意把terminal放在wqy的前面,结果英文正常(使用terminal),数字却优先使用wqy

按理说,terminal里面也有数字字体,数字的显示应该terminal优先于wqy。但是我总发现纯数字用wqy显示了,不解。。。。


页首
 用户资料  
 
4 楼 
 文章标题 :
帖子发表于 : 2006-07-01 19:12 
头像

注册: 2005-08-14 21:55
帖子: 58428
地址: 长沙
送出感谢: 4
接收感谢: 272
哦。但是我那个帖子里面有图。使用courier+kai,数字是正常的courier啊。


_________________
● 鸣学


页首
 用户资料  
 
5 楼 
 文章标题 :
帖子发表于 : 2006-07-03 3:24 
头像

注册: 2005-08-02 7:23
帖子: 773
地址: 上海
送出感谢: 0 次
接收感谢: 1
因为因为fontconfig匹配字体时lang(语言)的优先级较高,所以纯数字可能会用中文字体.用stong参数绑定可以略掉lang选用,强制选用播入的字体.试试下面的代码:
代码:
        <match target="pattern">
                <test name="family">
                        <string>WenQuanYi Bitmap Song</string>
                </test>
                <edit binding="strong" mode="prepend" name="family">
                         <string>Terminal</string>
                </edit>
        </match>


_________________
Ubuntu Intrepid
#P4 2.4
P4 2.4C
#1024MB
2048MB
#120G
500G+120G
Nvidia FX5700
#ATI9100 --拆了,受不了ATI的驱动.


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 5 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 2 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译