[问题]安装雅黑字体fonts.conf问题?

系统字体配置、中文显示和输入法问题
回复
hoopeni
帖子: 43
注册时间: 2007-05-13 13:39
来自: 西安

[问题]安装雅黑字体fonts.conf问题?

#1

帖子 hoopeni » 2007-05-20 23:34

我在我上按照这个帖子方法安装http://blog.csdn.net/ggjjzhzz/archive/2 ... 40059.aspx在第5步设置fonts.conf时按帖子要在<match target=“fonts“>下加一段代码,可是我在我的fonts.conf
中没找的<match target=“fonts“>这行代码,清各位赐教!我的fonts.conf如下:

代码: 全选

<?xml version="1.0"?>
<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
<!-- /etc/fonts/fonts.conf file to configure system font access -->
<fontconfig>

<!--
	DO NOT EDIT THIS FILE.
	IT WILL BE REPLACED WHEN FONTCONFIG IS UPDATED.
	LOCAL CHANGES BELONG IN 'local.conf'.

	The intent of this standard configuration file is to be adequate for
	most environments.  If you have a reasonably normal environment and
	have found problems with this configuration, they are probably
	things that others will also want fixed.  Please submit any
	problems to the fontconfig bugzilla system located at fontconfig.org

	Note that the normal 'make install' procedure for fontconfig is to
	replace any existing fonts.conf file with the new version.  Place
	any local customizations in local.conf which this file references.

	Keith Packard
-->

<!-- Font directory list -->

	<dir>/usr/share/fonts</dir>
	<dir>/usr/share/X11/fonts</dir> <dir>/usr/local/share/fonts</dir>
	<dir>~/.fonts</dir>

<!-- Font cache directory list -->

	<cachedir>/var/cache/fontconfig</cachedir>
	<cachedir>~/.fontconfig</cachedir>

<!--
  Accept deprecated 'mono' alias, replacing it with 'monospace'
-->
	<match target="pattern">
		<test qual="any" name="family">
			<string>mono</string>
		</test>
		<edit name="family" mode="assign">
			<string>monospace</string>
		</edit>
	</match>

<!--
  Accept alternate 'sans serif' spelling, replacing it with 'sans-serif'
-->
	<match target="pattern">
		<test qual="any" name="family">
			<string>sans serif</string>
		</test>
		<edit name="family" mode="assign">
			<string>sans-serif</string>
		</edit>
	</match>

<!--
  Accept deprecated 'sans' alias, replacing it with 'sans-serif'
-->
	<match target="pattern">
		<test qual="any" name="family">
			<string>sans</string>
		</test>
		<edit name="family" mode="assign">
			<string>sans-serif</string>
		</edit>
	</match>

<!--
  Load local system customization file
-->
	<include ignore_missing="yes">conf.d</include>

	<config>
<!--
  These are the default Unicode chars that are expected to be blank
  in fonts.  All other blank chars are assumed to be broken and
  won't appear in the resulting charsets
 -->
		<blank>
			<int>0x0020</int>	<!-- SPACE -->
			<int>0x00A0</int>	<!-- NO-BREAK SPACE -->
			<int>0x00AD</int>	<!-- SOFT HYPHEN -->
			<int>0x034F</int>	<!-- COMBINING GRAPHEME JOINER -->
			<int>0x0600</int>	<!-- ARABIC NUMBER SIGN -->
			<int>0x0601</int>	<!-- ARABIC SIGN SANAH -->
			<int>0x0602</int>	<!-- ARABIC FOOTNOTE MARKER -->
			<int>0x0603</int>	<!-- ARABIC SIGN SAFHA -->
			<int>0x06DD</int>	<!-- ARABIC END OF AYAH -->
			<int>0x070F</int>	<!-- SYRIAC ABBREVIATION MARK -->
			<int>0x115F</int>	<!-- HANGUL CHOSEONG FILLER -->
			<int>0x1160</int>	<!-- HANGUL JUNGSEONG FILLER -->
			<int>0x1680</int>	<!-- OGHAM SPACE MARK -->
			<int>0x17B4</int>	<!-- KHMER VOWEL INHERENT AQ -->
			<int>0x17B5</int>	<!-- KHMER VOWEL INHERENT AA -->
			<int>0x180E</int>	<!-- MONGOLIAN VOWEL SEPARATOR -->
			<int>0x2000</int>	<!-- EN QUAD -->
			<int>0x2001</int>	<!-- EM QUAD -->
			<int>0x2002</int>	<!-- EN SPACE -->
			<int>0x2003</int>	<!-- EM SPACE -->
			<int>0x2004</int>	<!-- THREE-PER-EM SPACE -->
			<int>0x2005</int>	<!-- FOUR-PER-EM SPACE -->
			<int>0x2006</int>	<!-- SIX-PER-EM SPACE -->
			<int>0x2007</int>	<!-- FIGURE SPACE -->
			<int>0x2008</int>	<!-- PUNCTUATION SPACE -->
			<int>0x2009</int>	<!-- THIN SPACE -->
			<int>0x200A</int>	<!-- HAIR SPACE -->
			<int>0x200B</int>	<!-- ZERO WIDTH SPACE -->
			<int>0x200C</int>	<!-- ZERO WIDTH NON-JOINER -->
			<int>0x200D</int>	<!-- ZERO WIDTH JOINER -->
			<int>0x200E</int>	<!-- LEFT-TO-RIGHT MARK -->
			<int>0x200F</int>	<!-- RIGHT-TO-LEFT MARK -->
			<int>0x2028</int>	<!-- LINE SEPARATOR -->
			<int>0x2029</int>	<!-- PARAGRAPH SEPARATOR -->
			<int>0x202A</int>	<!-- LEFT-TO-RIGHT EMBEDDING -->
			<int>0x202B</int>	<!-- RIGHT-TO-LEFT EMBEDDING -->
			<int>0x202C</int>	<!-- POP DIRECTIONAL FORMATTING -->
			<int>0x202D</int>	<!-- LEFT-TO-RIGHT OVERRIDE -->
			<int>0x202E</int>	<!-- RIGHT-TO-LEFT OVERRIDE -->
			<int>0x202F</int>	<!-- NARROW NO-BREAK SPACE -->
			<int>0x205F</int>	<!-- MEDIUM MATHEMATICAL SPACE -->
			<int>0x2060</int>	<!-- WORD JOINER -->
			<int>0x2061</int>	<!-- FUNCTION APPLICATION -->
			<int>0x2062</int>	<!-- INVISIBLE TIMES -->
			<int>0x2063</int>	<!-- INVISIBLE SEPARATOR -->
			<int>0x206A</int>	<!-- INHIBIT SYMMETRIC SWAPPING -->
			<int>0x206B</int>	<!-- ACTIVATE SYMMETRIC SWAPPING -->
			<int>0x206C</int>	<!-- INHIBIT ARABIC FORM SHAPING -->
			<int>0x206D</int>	<!-- ACTIVATE ARABIC FORM SHAPING -->
			<int>0x206E</int>	<!-- NATIONAL DIGIT SHAPES -->
			<int>0x206F</int>	<!-- NOMINAL DIGIT SHAPES -->
			<int>0x3000</int>	<!-- IDEOGRAPHIC SPACE -->
			<int>0x3164</int>	<!-- HANGUL FILLER -->
			<int>0xFEFF</int>	<!-- ZERO WIDTH NO-BREAK SPACE -->
			<int>0xFFA0</int>	<!-- HALFWIDTH HANGUL FILLER -->
			<int>0xFFF9</int>	<!-- INTERLINEAR ANNOTATION ANCHOR -->
			<int>0xFFFA</int>	<!-- INTERLINEAR ANNOTATION SEPARATOR -->
			<int>0xFFFB</int>	<!-- INTERLINEAR ANNOTATION TERMINATOR -->
		</blank>
<!--
  Rescan configuration every 30 seconds when FcFontSetList is called
 -->
		<rescan>
			<int>30</int>
		</rescan>
	</config>

</fontconfig>
maxima
帖子: 41
注册时间: 2005-06-12 16:41

#2

帖子 maxima » 2007-05-21 12:24

你把别人的那一段直接放在用户目录下的.fonts.conf 试试看。这样以后更新系统的时候可能就少了一个提示。
重装系统的时候也不用改了,省事。
hoopeni
帖子: 43
注册时间: 2007-05-13 13:39
来自: 西安

#3

帖子 hoopeni » 2007-05-21 17:24

呵呵,谢谢。是个办法!我再学学看看!!!
foxracle
帖子: 2
注册时间: 2007-05-16 11:53

#4

帖子 foxracle » 2007-05-22 11:43

把那段配置放在文件中<match>同一层次上就可以了
hoopeni
帖子: 43
注册时间: 2007-05-13 13:39
来自: 西安

#5

帖子 hoopeni » 2007-05-22 18:09

foxracle 写了:把那段配置放在文件中<match>同一层次上就可以了
要加的是这一段(引用别人写的):
5、打开sudo gedit /etc/fonts/fonts.conf文件,找到以<match target="font">的部份(格式最好和它们的一样排列)加入下面一段:
<match target="font">
<test name="family">
<string>STHeiti</string>
<string>Microsoft YaHei</string>
</test>
<edit name="hinting">
<bool>false</bool>
</edit>
</match>
具体指点下,在那加!!
头像
forrid
帖子: 659
注册时间: 2007-04-23 17:40

#6

帖子 forrid » 2007-05-22 19:20

不明白
回复