当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 10 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : [已解决]Ubuntu假死时的一部分日志,懂的人帮看看[请为灾区捐款]
帖子发表于 : 2008-05-06 15:08 

注册: 2007-12-10 12:32
帖子: 12
送出感谢: 0 次
接收感谢: 0 次
笔记本电脑 acer 5583,Ubuntu8.04
系统偶尔会假死几秒,比如 用firefox 假死时 firefox浏览器会暗下来。播放音频时会卡住

May 6 14:17:01 user /USR/SBIN/CRON[27224]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
May 6 14:30:53 user -- MARK --
May 6 14:36:41 user kernel: [11451.736157] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
May 6 14:36:41 user kernel: [11451.736177] ata1.01: cmd a0/00:00:00:08:00/00:00:00:00:00/b0 tag 0 pio 8 in
May 6 14:36:41 user kernel: [11451.736179] cdb 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
May 6 14:36:41 user kernel: [11451.736181] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
May 6 14:36:41 user kernel: [11451.736187] ata1.01: status: { DRDY }
May 6 14:36:46 user kernel: [11456.771914] ata1: port is slow to respond, please be patient (Status 0xd0)
May 6 14:36:51 user kernel: [11461.753743] ata1: device not ready (errno=-16), forcing hardreset
May 6 14:36:51 user kernel: [11461.753752] ata1: soft resetting link
May 6 14:36:51 user kernel: [11462.146540] ata1.00: configured for UDMA/100
May 6 14:36:51 user kernel: [11462.333808] ata1.01: configured for UDMA/33
May 6 14:36:51 user kernel: [11462.333827] ata1: EH complete
May 6 14:36:51 user kernel: [11462.349865] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
May 6 14:36:52 user kernel: [11462.824486] sd 0:0:0:0: [sda] Write Protect is off
May 6 14:36:52 user kernel: [11462.824495] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 6 14:36:52 user kernel: [11462.852530] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 6 14:36:52 user kernel: [11462.880787] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
May 6 14:36:52 user kernel: [11462.900425] sd 0:0:0:0: [sda] Write Protect is off
May 6 14:36:52 user kernel: [11462.900434] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 6 14:36:52 user kernel: [11462.936384] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 6 14:50:53 user -- MARK --


最后由 wjpwu 编辑于 2008-05-15 13:36,总共编辑了 2 次

页首
 用户资料  
 
2 楼 
 文章标题 :
帖子发表于 : 2008-05-12 11:06 

注册: 2007-12-10 12:32
帖子: 12
送出感谢: 0 次
接收感谢: 0 次
May 9 10:19:07 wjpwu-desktop kernel: [ 1424.591071] ata1.01: qc timeout (cmd 0xa0)
May 9 10:19:07 wjpwu-desktop kernel: [ 1424.591091] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
May 9 10:19:07 wjpwu-desktop kernel: [ 1424.591107] ata1.01: cmd a0/00:00:00:0c:00/00:00:00:00:00/b0 tag 0 pio 12 in
May 9 10:19:07 wjpwu-desktop kernel: [ 1424.591109] cdb 43 00 00 00 00 00 00 00 0c 00 00 00 00 00 00 00
May 9 10:19:07 wjpwu-desktop kernel: [ 1424.591112] res 51/20:03:00:00:00/00:00:00:00:00/b0 Emask 0x5 (timeout)
May 9 10:19:07 wjpwu-desktop kernel: [ 1424.591117] ata1.01: status: { DRDY ERR }
May 9 10:19:12 wjpwu-desktop kernel: [ 1427.620550] ata1: port is slow to respond, please be patient (Status 0xd1)
May 9 10:19:17 wjpwu-desktop kernel: [ 1430.805468] ata1: device not ready (errno=-16), forcing hardreset
May 9 10:19:17 wjpwu-desktop kernel: [ 1430.805477] ata1: soft resetting link
May 9 10:19:17 wjpwu-desktop kernel: [ 1431.000683] ata1.00: configured for UDMA/100
May 9 10:19:17 wjpwu-desktop kernel: [ 1431.114059] ata1.01: configured for UDMA/33
May 9 10:19:17 wjpwu-desktop kernel: [ 1431.114085] ata1: EH complete
May 9 10:19:17 wjpwu-desktop kernel: [ 1431.124170] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
May 9 10:19:17 wjpwu-desktop kernel: [ 1431.137854] sd 0:0:0:0: [sda] Write Protect is off
May 9 10:19:17 wjpwu-desktop kernel: [ 1431.137861] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 9 10:19:17 wjpwu-desktop kernel: [ 1431.156274] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 9 10:19:17 wjpwu-desktop kernel: [ 1431.169656] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
May 9 10:19:17 wjpwu-desktop kernel: [ 1431.175919] sd 0:0:0:0: [sda] Write Protect is off
May 9 10:19:17 wjpwu-desktop kernel: [ 1431.175925] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
May 9 10:19:17 wjpwu-desktop kernel: [ 1431.196407] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA


页首
 用户资料  
 
3 楼 
 文章标题 :
帖子发表于 : 2008-05-12 11:11 

注册: 2007-12-10 12:32
帖子: 12
送出感谢: 0 次
接收感谢: 0 次
uname -a
Linux wjpwu-desktop 2.6.24-17-generic #1 SMP Thu May 1 14:31:33 UTC 2008 i686 GNU/Linux
dmesg部分
[ 20.067393] ata_piix 0000:00:1f.1: version 2.12
[ 20.067417] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 20.067472] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 20.067551] scsi0 : ata_piix
[ 20.067601] scsi1 : ata_piix
[ 20.067729] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
[ 20.067732] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
[ 20.194025] Clocksource tsc unstable (delta = -1690410389 ns)
[ 20.199004] Time: hpet clocksource has been installed.
[ 20.260895] ata1.00: ATA-7: SAMSUNG HM120JC, YL100-19, max UDMA/100
[ 20.260901] ata1.00: 234441648 sectors, multi 16: LBA48
[ 20.260948] ata1.01: ATAPI: TSSTcorpCD/DVDW TS-L632D, ac00, max UDMA/33
[ 20.263079] ata1.00: configured for UDMA/100
[ 20.278153] ata1.01: configured for UDMA/33
[ 20.314684] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM120JC YL10 PQ: 0 ANSI: 5
[ 20.315735] scsi 0:0:1:0: CD-ROM TSSTcorp CD/DVDW TS-L632D ac00 PQ: 0 ANSI: 5
[ 20.327914] Driver 'sd' needs updating - please use bus_type methods
[ 20.327985] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 20.327997] sd 0:0:0:0: [sda] Write Protect is off
[ 20.328000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 20.328017] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 20.328064] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 20.328075] sd 0:0:0:0: [sda] Write Protect is off
[ 20.328077] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 20.328094] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 20.328097] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 20.359611] sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
[ 20.444389] sd 0:0:0:0: [sda] Attached SCSI disk
[ 20.449986] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 20.450006] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 20.456400] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 20.456404] Uniform CD-ROM driver Revision: 3.20
[ 20.456459] sr 0:0:1:0: Attached scsi CD-ROM sr0


页首
 用户资料  
 
4 楼 
 文章标题 :
帖子发表于 : 2008-05-12 11:15 

注册: 2007-12-10 12:32
帖子: 12
送出感谢: 0 次
接收感谢: 0 次
dmesg > dmesg.log
sudo lspci -vvnn > lspci-vvnn.log


帮看看,谢谢~


页首
 用户资料  
 
5 楼 
 文章标题 :
帖子发表于 : 2008-05-15 10:16 

注册: 2007-12-10 12:32
帖子: 12
送出感谢: 0 次
接收感谢: 0 次
问题已找到,是光驱TS-L632D所致。
现在的做法是将固件强行刷到SC04版,以前是AC00版。
ata1.01: ATAPI: TSSTcorpCD/DVDW TS-L632D, SC04, max UDMA/33.
现在在观察期,出现同样问题再报告。

另外,希望大家涌跃为四川振灾捐款捐物,帮助他们渡过最困难的时期,都是同胞,同舟共济!


页首
 用户资料  
 
6 楼 
 文章标题 :
帖子发表于 : 2008-05-23 20:44 
头像

注册: 2007-06-26 23:50
帖子: 221
地址: WHU
送出感谢: 0 次
接收感谢: 0 次
貌似我也出现了类似的问题。菜鸟我问一句,这个固件是如何刷新的?谢谢.


页首
 用户资料  
 
7 楼 
 文章标题 :
帖子发表于 : 2008-05-28 6:56 

注册: 2007-06-08 9:48
帖子: 7
送出感谢: 0 次
接收感谢: 0 次
好像8.0.4现在的kernel 2.6.24-17磁盘设备的驱动还是有问题的,用2.6.22,一切都没有问题,包括我现在机器上的HPT366的IDE卡,都一切正常的,但是升级到8.0.4的内核,现在启动的时候就死掉了,最后显示的是
sda:<4>Driver 'sr' needs updating - please use bus_type methods
google了好久了,一直找不到就解决


页首
 用户资料  
 
8 楼 
 文章标题 : Re: [已解决]Ubuntu假死时的一部分日志,懂的人帮看看[请为灾区捐款]
帖子发表于 : 2009-10-21 9:38 

注册: 2009-10-21 9:16
帖子: 5
送出感谢: 0 次
接收感谢: 0 次
我也有同样的问题阿,没次都期待新的版本里能够解决,为什么要这么对我,阿阿阿阿阿
[ 787.006584] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 787.006605] ata1.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0
[ 787.006607] cdb 1e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 787.006609] res 40/00:02:00:08:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
[ 787.006616] ata1.01: status: { DRDY }
[ 792.044137] ata1: link is slow to respond, please be patient (ready=0)
[ 797.028021] ata1: device not ready (errno=-16), forcing hardreset
[ 797.028033] ata1: soft resetting link
[ 797.256561] ata1.00: configured for UDMA/100
[ 797.288305] ata1.01: configured for UDMA/33
[ 797.296418] ata1: EH complete
[ 1172.007666] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 1172.007687] ata1.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0
[ 1172.007689] cdb 1e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1172.007691] res 40/00:02:00:08:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
[ 1172.007698] ata1.01: status: { DRDY }
[ 1177.049230] ata1: link is slow to respond, please be patient (ready=0)
[ 1182.041181] ata1: device not ready (errno=-16), forcing hardreset
[ 1182.041197] ata1: soft resetting link
[ 1182.245831] ata1.00: configured for UDMA/100
[ 1182.277499] ata1.01: configured for UDMA/33
[ 1182.285665] ata1: EH complete
[ 1782.541657] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 1782.541666] ata1.01: ST_FIRST: !(DRQ|ERR|DF)
[ 1782.541682] ata1.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0
[ 1782.541685] cdb 1e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1782.541687] res 50/00:00:00:00:00/00:00:00:00:00/b0 Emask 0x2 (HSM violation)
[ 1782.541693] ata1.01: status: { DRDY }
[ 1782.541737] ata1: soft resetting link
[ 1782.744787] ata1.00: configured for UDMA/100
[ 1782.784496] ata1.01: configured for UDMA/33
[ 1782.792627] ata1: EH complete
[ 1942.756158] __ratelimit: 3 callbacks suppressed
[ 1942.756164] ACPI: EC: missing confirmations, switch off interrupt mode.
[ 2676.007232] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2676.007254] ata1.01: cmd a0/00:00:00:08:00/00:00:00:00:00/b0 tag 0 pio 16392 in
[ 2676.007257] cdb 4a 01 00 00 10 00 00 00 08 00 00 00 00 00 00 00
[ 2676.007259] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
[ 2676.007265] ata1.01: status: { DRDY }
[ 2681.053060] ata1: link is slow to respond, please be patient (ready=0)
[ 2686.045140] ata1: device not ready (errno=-16), forcing hardreset
[ 2686.045156] ata1: soft resetting link
[ 2686.265855] ata1.00: configured for UDMA/100
[ 2686.305526] ata1.01: configured for UDMA/33
[ 2686.316955] ata1: EH complete


页首
 用户资料  
 
9 楼 
 文章标题 : Re:
帖子发表于 : 2009-11-26 12:26 

注册: 2007-01-21 14:04
帖子: 157
送出感谢: 1
接收感谢: 0 次
怎么刷啊,我这也有类似的问题
代码:
[  521.000064] ata1: lost interrupt (Status 0x58)
[  521.004021] ata1: drained 32768 bytes to clear DRQ.
[  521.093440] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  521.093466] ata1.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0
[  521.093469]          cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[  521.093473]          res 58/00:01:00:00:00/00:00:00:00:00/b0 Emask 0x2 (HSM violation)
[  521.093481] ata1.01: status: { DRDY DRQ }
[  521.093525] ata1: soft resetting link
[  521.296512] ata1.00: configured for UDMA/100
[  521.328357] ata1.01: configured for UDMA/33
[  521.348150] ata1: EH complete
[  921.000052] ata1: lost interrupt (Status 0x58)
[  921.004017] ata1: drained 32768 bytes to clear DRQ.
[  921.093319] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  921.093345] ata1.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0
[  921.093348]          cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[  921.093351]          res 58/00:01:00:00:00/00:00:00:00:00/b0 Emask 0x2 (HSM violation)
[  921.093360] ata1.01: status: { DRDY DRQ }
[  921.093403] ata1: soft resetting link
[  921.296507] ata1.00: configured for UDMA/100
[  921.328353] ata1.01: configured for UDMA/33
[  921.348116] ata1: EH complete

ata1.01是光驱
代码:
[    0.996611] ata1.01: ATAPI: TSSTcorpCDW/DVD TS-L462D, CH00, max UDMA/33
[    1.012447] ata1.00: configured for UDMA/100
[    1.044489] ata1.01: configured for UDMA/33


wjpwu 写道:
问题已找到,是光驱TS-L632D所致。
现在的做法是将固件强行刷到SC04版,以前是AC00版。
ata1.01: ATAPI: TSSTcorpCD/DVDW TS-L632D, SC04, max UDMA/33.
现在在观察期,出现同样问题再报告。

另外,希望大家涌跃为四川振灾捐款捐物,帮助他们渡过最困难的时期,都是同胞,同舟共济!


页首
 用户资料  
 
10 楼 
 文章标题 : Re: [已解决]Ubuntu假死时的一部分日志,懂的人帮看看[请为灾区捐款]
帖子发表于 : 2011-02-01 10:31 
头像

注册: 2007-06-26 23:50
帖子: 221
地址: WHU
送出感谢: 0 次
接收感谢: 0 次
具体固件烧写方法,参加 http://qianjigui.javaeye.com/blog/900571


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 10 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 1 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译