当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 2 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : 系统起动时显示ACPI: Invalid PBLK length [0],过一会才能起动。内文有dmesg信息
帖子发表于 : 2007-04-12 12:53 

注册: 2006-09-18 19:56
帖子: 31
送出感谢: 0 次
接收感谢: 0 次
[17179569.184000] Linux version 2.6.17-11-generic (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Tue Mar 13 23:32:38 UTC 2007 (Ubuntu 2.6.17-11.37-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000001ff40000 (usable)
[17179569.184000] BIOS-e820: 000000001ff40000 - 000000001ff50000 (ACPI data)
[17179569.184000] BIOS-e820: 000000001ff50000 - 0000000020000000 (ACPI NVS)
[17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 511MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000ff780
[17179569.184000] On node 0 totalpages: 130880
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 126784 pages, LIFO batch:31
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ACPIAM ) @ 0x000f7570
[17179569.184000] ACPI: RSDT (v001 A M I OEMRSDT 0x11000425 MSFT 0x00000097) @ 0x1ff40000
[17179569.184000] ACPI: FADT (v001 A M I OEMFACP 0x11000425 MSFT 0x00000097) @ 0x1ff40200
[17179569.184000] ACPI: MADT (v001 A M I OEMAPIC 0x11000425 MSFT 0x00000097) @ 0x1ff40390
[17179569.184000] ACPI: OEMB (v001 A M I OEMBIOS 0x11000425 MSFT 0x00000097) @ 0x1ff50040
[17179569.184000] ACPI: DSDT (v001 A4D-U A4D-U001 0x00000001 INTL 0x02002026) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x4008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:12 APIC version 16
[17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: BIOS IRQ0 pin2 override ignored.
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] ACPI: IRQ14 used by override.
[17179569.184000] ACPI: IRQ15 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=UUID=254d4d15-600f-49a4-a05c-22f0508b1dc4 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[17179569.184000] Detected 1795.562 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179570.436000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179570.436000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179570.448000] Memory: 507744k/523520k available (1911k kernel code, 15196k reserved, 1073k data, 308k init, 0k highmem)
[17179570.448000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179570.528000] Calibrating delay using timer specific routine.. 3595.12 BogoMIPS (lpj=7190256)
[17179570.528000] Security Framework v1.0.0 initialized
[17179570.528000] SELinux: Disabled at boot.
[17179570.528000] Mount-cache hash table entries: 512
[17179570.528000] CPU: After generic identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000000 00000000 00000001
[17179570.528000] CPU: After vendor identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000000 00000000 00000001
[17179570.528000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179570.528000] CPU: L2 Cache: 128K (64 bytes/line)
[17179570.528000] CPU: After all inits, caps: 078bfbff c3d3fbff 00000000 00000410 00000000 00000000 00000001
[17179570.528000] Checking 'hlt' instruction... OK.
[17179570.544000] SMP alternatives: switching to UP code
[17179570.544000] Freeing SMP alternatives: 16k freed
[17179570.544000] checking if image is initramfs... it is
[17179571.132000] Freeing initrd memory: 6912k freed
[17179571.132000] ACPI: Core revision 20060707
[17179571.136000] ACPI: Looking for DSDT ... not found!
[17179571.140000] CPU0: AMD Mobile AMD Sempron(tm) Processor 3000+ stepping 00
[17179571.140000] Total of 1 processors activated (3595.12 BogoMIPS).
[17179571.140000] ENABLING IO-APIC IRQs
[17179571.140000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[17179571.288000] Brought up 1 CPUs
[17179571.288000] migration_cost=0
[17179571.288000] NET: Registered protocol family 16
[17179571.288000] EISA bus registered
[17179571.288000] ACPI: bus type pci registered
[17179571.288000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
[17179571.288000] PCI: Using configuration type 1
[17179571.288000] Setting up standard PCI resources
[17179571.308000] ACPI: Interpreter enabled
[17179571.308000] ACPI: Using IOAPIC for interrupt routing
[17179571.312000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179571.312000] PCI: Probing PCI hardware (bus 00)
[17179571.312000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:08.0
[17179571.312000] PCI: Bus #03 (-#06) is hidden behind bridge #02 (-#03) (try 'pci=assign-busses')
[17179571.312000] Please report the result to linux-kernel to fix this permanently
[17179571.312000] Boot video device is 0000:01:00.0
[17179571.312000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179571.320000] ACPI: Embedded Controller [EC0] (gpe 37) interrupt mode.
[17179571.324000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[17179571.324000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[17179571.324000] ACPI: PCI Interrupt Link [LNKA] (IRQs 17) *0, disabled.
[17179571.324000] ACPI: PCI Interrupt Link [LNKB] (IRQs 18) *0, disabled.
[17179571.324000] ACPI: PCI Interrupt Link [LNKC] (IRQs 19) *10
[17179571.328000] ACPI: PCI Interrupt Link [LNKD] (IRQs 17) *10
[17179571.328000] ACPI: PCI Interrupt Link [LNKE] (IRQs 17) *11
[17179571.328000] ACPI: PCI Interrupt Link [LUS0] (IRQs 20) *10
[17179571.328000] ACPI: PCI Interrupt Link [LUS1] (IRQs 20) *11
[17179571.328000] ACPI: PCI Interrupt Link [LUS2] (IRQs 20) *4
[17179571.328000] ACPI: PCI Interrupt Link [LKLN] (IRQs 21) *0, disabled.
[17179571.328000] ACPI: PCI Interrupt Link [LAUI] (IRQs 21) *5
[17179571.328000] ACPI: PCI Interrupt Link [LKMO] (IRQs 20) *10
[17179571.332000] ACPI: PCI Interrupt Link [LKSM] (IRQs 22) *0, disabled.
[17179571.332000] ACPI: PCI Interrupt Link [LTID] (IRQs 22) *0, disabled.
[17179571.332000] ACPI: PCI Interrupt Link [LATA] (IRQs 22) *14
[17179571.332000] ACPI: Power Resource [GFAN] (off)
[17179571.332000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179571.332000] pnp: PnP ACPI init
[17179571.336000] pnp: PnP ACPI: found 13 devices
[17179571.336000] PnPBIOS: Disabled by ACPI PNP
[17179571.336000] PCI: Using ACPI for IRQ routing
[17179571.336000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179571.344000] pnp: 00:07: ioport range 0xa00-0xa0f has been reserved
[17179571.344000] PCI: Failed to allocate mem resource #10:2000000@0 for 0000:02:01.0
[17179571.344000] PCI: Bus 3, cardbus bridge: 0000:02:01.0
[17179571.344000] IO window: 0000c000-0000c0ff
[17179571.344000] IO window: 0000c400-0000c4ff
[17179571.344000] PREFETCH window: 30000000-31ffffff
[17179571.344000] PCI: Bridge: 0000:00:0a.0
[17179571.344000] IO window: c000-dfff
[17179571.344000] MEM window: fba00000-feafffff
[17179571.344000] PREFETCH window: 30000000-31ffffff
[17179571.344000] PCI: Bridge: 0000:00:0b.0
[17179571.344000] IO window: 9000-bfff
[17179571.344000] MEM window: fb900000-fb9fffff
[17179571.344000] PREFETCH window: db800000-eb7fffff
[17179571.344000] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[17179571.344000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
[17179571.344000] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKB] -> GSI 18 (level, low) -> IRQ 177
[17179571.344000] NET: Registered protocol family 2
[17179571.384000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[17179571.384000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[17179571.384000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[17179571.384000] TCP: Hash tables configured (established 16384 bind 8192)
[17179571.384000] TCP reno registered
[17179571.384000] audit: initializing netlink socket (disabled)
[17179571.384000] audit(1176381128.384:1): initialized
[17179571.384000] VFS: Disk quotas dquot_6.5.1
[17179571.384000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179571.384000] Initializing Cryptographic API
[17179571.384000] io scheduler noop registered
[17179571.384000] io scheduler anticipatory registered
[17179571.384000] io scheduler deadline registered
[17179571.384000] io scheduler cfq registered (default)
[17179579.388000] 0000:00:02.2 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
[17179579.388000] isapnp: Scanning for PnP cards...
[17179579.744000] isapnp: No Plug & Play device found
[17179579.768000] Real Time Clock Driver v1.12ac
[17179579.768000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179579.768000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179579.768000] ACPI: PCI Interrupt Link [LKMO] enabled at IRQ 20
[17179579.768000] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [LKMO] -> GSI 20 (level, low) -> IRQ 185
[17179579.768000] ACPI: PCI interrupt for device 0000:00:06.1 disabled
[17179579.768000] mice: PS/2 mouse device common for all mice
[17179579.772000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179579.772000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179579.772000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179579.772000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[17179579.772000] i8042.c: Detected active multiplexing controller, rev 1.1.
[17179579.772000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[17179579.772000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[17179579.772000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[17179579.776000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[17179579.776000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179579.776000] EISA: Probing bus 0 at eisa.0
[17179579.776000] Cannot allocate resource for EISA slot 4
[17179579.776000] Cannot allocate resource for EISA slot 5
[17179579.776000] EISA: Detected 0 cards.
[17179579.776000] TCP bic registered
[17179579.776000] NET: Registered protocol family 1
[17179579.776000] NET: Registered protocol family 8
[17179579.776000] NET: Registered protocol family 20
[17179579.776000] Using IPI No-Shortcut mode
[17179579.776000] ACPI: (supports S0 S1 S3 S4 S5)
[17179579.776000] Freeing unused kernel memory: 308k freed
[17179579.824000] Capability LSM initialized
[17179579.852000] ACPI: Transitioning device [FN00] to D3
[17179579.852000] ACPI: Transitioning device [FN00] to D3
[17179579.852000] ACPI: Fan [FN00] (off)
[17179579.856000] ACPI: Invalid PBLK length [0]
[17179579.908000] ACPI: Thermal Zone [THRM] (51 C)
[17179579.940000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179580.424000] SCSI subsystem initialized
[17179580.424000] libata version 1.20 loaded.
[17179580.428000] NFORCE3-150: IDE controller at PCI slot 0000:00:08.0
[17179580.428000] NFORCE3-150: chipset revision 165
[17179580.428000] NFORCE3-150: not 100% native mode: will probe irqs later
[17179580.428000] NFORCE3-150: BIOS didn't set cable bits correctly. Enabling workaround.
[17179580.428000] NFORCE3-150: 0000:00:08.0 (rev a5) UDMA133 controller
[17179580.428000] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
[17179580.428000] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
[17179580.428000] Probing IDE interface ide0...
[17179580.716000] hda: HTS424040M9AT00, ATA DISK drive
[17179581.388000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179581.392000] Probing IDE interface ide1...
[17179582.128000] hdc: UJDA760 DVD/CDRW, ATAPI CD/DVD-ROM drive
[17179582.800000] ide1 at 0x170-0x177,0x376 on irq 15
[17179582.808000] hda: max request size: 512KiB
[17179582.824000] hda: 78140160 sectors (40007 MB) w/1739KiB Cache, CHS=16383/255/63, UDMA(100)
[17179582.824000] hda: cache flushes supported
[17179582.824000] hda: hda1 hda2 hda3
[17179582.884000] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179582.884000] Uniform CD-ROM driver Revision: 3.20
[17179583.488000] usbcore: registered new driver usbfs
[17179583.488000] usbcore: registered new driver hub
[17179583.492000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179583.492000] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
[17179583.492000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 20 (level, low) -> IRQ 185
[17179583.492000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179583.492000] ohci_hcd 0000:00:02.0: OHCI Host Controller
[17179583.492000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[17179583.824000] ohci_hcd 0000:00:02.0: irq 185, io mem 0xfebfb000
[17179583.824000] ieee1394: Initialized config rom entry `ip1394'
[17179583.884000] usb usb1: configuration #1 chosen from 1 choice
[17179583.884000] hub 1-0:1.0: USB hub found
[17179583.884000] hub 1-0:1.0: 3 ports detected
[17179583.988000] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20
[17179583.988000] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 20 (level, low) -> IRQ 185
[17179583.988000] PCI: Setting latency timer of device 0000:00:02.2 to 64
[17179583.988000] ehci_hcd 0000:00:02.2: EHCI Host Controller
[17179583.988000] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 2
[17179583.988000] ehci_hcd 0000:00:02.2: debug port 1
[17179583.988000] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[17179583.988000] ehci_hcd 0000:00:02.2: irq 185, io mem 0xfebfdc00
[17179583.988000] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179584.008000] usb usb2: configuration #1 chosen from 1 choice
[17179584.008000] hub 2-0:1.0: USB hub found
[17179584.008000] hub 2-0:1.0: 6 ports detected
[17179584.116000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19
[17179584.116000] ACPI: PCI Interrupt 0000:02:01.1[B] -> Link [LNKC] -> GSI 19 (level, low) -> IRQ 193
[17179584.164000] ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 20
[17179584.164000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1] -> GSI 20 (level, low) -> IRQ 185
[17179584.164000] PCI: Setting latency timer of device 0000:00:02.1 to 64
[17179584.164000] ohci_hcd 0000:00:02.1: OHCI Host Controller
[17179584.164000] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
[17179584.176000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[193] MMIO=[feaff000-feaff7ff] Max Packet=[2048] IR/IT contexts=[4/4]
[17179584.184000] ohci_hcd 0000:00:02.1: irq 185, io mem 0xfebfc000
[17179584.244000] usb usb3: configuration #1 chosen from 1 choice
[17179584.244000] hub 3-0:1.0: USB hub found
[17179584.244000] hub 3-0:1.0: 3 ports detected
[17179584.620000] usb 2-5: new high speed USB device using ehci_hcd and address 3
[17179584.752000] usb 2-5: configuration #1 chosen from 1 choice
[17179585.048000] kjournald starting. Commit interval 5 seconds
[17179585.048000] EXT3-fs: mounted filesystem with ordered data mode.
[17179585.056000] usb 3-1: new low speed USB device using ohci_hcd and address 2
[17179585.272000] usb 3-1: configuration #1 chosen from 1 choice
[17179585.460000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180003306a61]
[17179605.532000] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
[17179605.532000] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5040
[17179606.184000] parport: PnPBIOS parport detected.
[17179606.184000] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[17179606.224000] irda_init()
[17179606.224000] NET: Registered protocol family 23
[17179606.304000] input: PC Speaker as /class/input/input1
[17179606.328000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179606.336000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179606.340000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa36eb3, caps: 0x904713/0x10008
[17179606.380000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[17179606.420000] Linux agpgart interface v0.101 (c) Dave Jones
[17179606.428000] agpgart: Detected AGP bridge 0
[17179606.428000] agpgart: Setting up Nforce3 AGP.
[17179606.432000] agpgart: AGP aperture is 128M @ 0xf0000000
[17179606.756000] ts: Compaq touchscreen protocol output
[17179606.908000] usbcore: registered new driver hiddev
[17179606.936000] input: Logitech Optical USB Mouse as /class/input/input3
[17179606.940000] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:02.1-1
[17179606.940000] usbcore: registered new driver usbhid
[17179606.940000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179606.944000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 19 (level, low) -> IRQ 193
[17179606.944000] skge 1.5 addr 0xfeaf8000 irq 193 chip Yukon-Lite rev 9
[17179606.944000] skge eth0: addr 00:11:d8:ea:96:80
[17179606.972000] sdhci: Secure Digital Host Controller Interface driver, 0.12
[17179606.972000] sdhci: Copyright(c) Pierre Ossman
[17179606.972000] sdhci: SDHCI controller found at 0000:02:01.2 [1180:0822] (rev 17)
[17179606.972000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 17
[17179606.972000] ACPI: PCI Interrupt 0000:02:01.2[C] -> Link [LNKD] -> GSI 17 (level, low) -> IRQ 201
[17179606.972000] mmc0: SDHCI at 0xfeaff800 irq 201 DMA
[17179607.052000] skge eth0: enabling interface
[17179607.076000] PCI: Enabling device 0000:00:06.0 (0001 -> 0003)
[17179607.076000] ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 21
[17179607.076000] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LAUI] -> GSI 21 (level, low) -> IRQ 209
[17179607.076000] PCI: Setting latency timer of device 0000:00:06.0 to 64
[17179607.648000] intel8x0_measure_ac97_clock: measured 55399 usecs
[17179607.648000] intel8x0: clocking to 47485
[17179607.648000] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKB] -> GSI 18 (level, low) -> IRQ 177
[17179607.648000] Yenta: CardBus bridge found at 0000:02:01.0 [1043:1987]
[17179607.776000] Yenta: ISA IRQ mask 0x0438, PCI irq 177
[17179607.776000] Socket status: 30000006
[17179607.776000] Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
[17179607.776000] pcmcia: parent PCI bridge I/O window: 0xc000 - 0xdfff
[17179607.776000] cs: IO port probe 0xc000-0xdfff: clean.
[17179607.776000] pcmcia: parent PCI bridge Memory window: 0xfba00000 - 0xfeafffff
[17179607.776000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x31ffffff
[17179608.108000] cs: IO port probe 0x100-0x3af: clean.
[17179608.108000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[17179608.108000] cs: IO port probe 0x820-0x8ff: clean.
[17179608.112000] cs: IO port probe 0xc00-0xcf7: clean.
[17179608.112000] cs: IO port probe 0xa00-0xaff: clean.
[17179608.188000] NET: Registered protocol family 17
[17179608.216000] lp0: using parport0 (interrupt-driven).
[17179608.276000] Adding 538168k swap on /dev/disk/by-uuid/6cb3fb77-8169-4ce1-8713-501b9a6b144d. Priority:-1 extents:1 across:538168k
[17179608.548000] EXT3 FS on hda2, internal journal
[17179608.740000] skge eth0: Link is up at 100 Mbps, full duplex, flow control tx and rx
[17179608.828000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179608.828000] md: bitmap version 4.39
[17179609.056000] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
[17179613.300000] NET: Registered protocol family 10
[17179613.300000] lo: Disabled Privacy Extensions
[17179613.300000] IPv6 over IPv4 tunneling driver
[17179623.876000] eth0: no IPv6 routers present
[17179631.052000] Asus Laptop ACPI Extras version 0.30
[17179631.052000] unsupported model A4D, trying default values
[17179631.052000] send /proc/acpi/dsdt to the developers
[17179631.068000] ACPI: AC Adapter [AC0] (on-line)
[17179631.128000] ACPI: Battery Slot [BAT0] (battery present)
[17179631.144000] ACPI: Power Button (FF) [PWRF]
[17179631.144000] ACPI: Sleep Button (CM) [SLPB]
[17179631.144000] ACPI: Lid Switch [LID]
[17179631.144000] ACPI: Power Button (CM) [PWRB]
[17179631.244000] ibm_acpi: ec object not found
[17179631.268000] pcc_acpi: loading...
[17179631.376000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[17179636.640000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179636.640000] apm: overridden by ACPI.
[17179638.484000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[17179638.484000] [fglrx] Maximum main memory to use for locked dma buffers: 431 MBytes.
[17179638.484000] [fglrx] module loaded - fglrx 8.28.8 [Aug 17 2006] on minor 0
[17179638.508000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2)
[17179638.508000] ACPI: Invalid package argument
[17179638.508000] ACPI Exception (acpi_processor-0275): AE_BAD_PARAMETER, Invalid _PSS data [20060707]
[17179638.516000] powernow-k8: 0 : fid 0x0 (800 MHz), vid 0x18 (950 mV)
[17179638.516000] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xa (1300 mV)
[17179638.516000] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x6 (1400 mV)
[17179638.516000] cpu_init done, current fid 0xa, vid 0x4
[17179638.516000] powernow-k8: ph2 null fid transition 0xa
[17179638.568000] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 17
[17179638.568000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKE] -> GSI 17 (level, low) -> IRQ 201
[17179645.820000] [fglrx] Internal AGP support requested, but kernel AGP support active.
[17179645.820000] [fglrx] Have to use kernel AGP support to avoid conflicts.
[17179645.820000] [fglrx] AGP detected, AgpState = 0x1f00421b (hardware caps of chipset)
[17179645.820000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[17179645.820000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[17179645.820000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[17179645.820000] [fglrx] AGP enabled, AgpCommand = 0x1f004312 (selected caps)
[17179645.828000] [fglrx] total GART = 134217728
[17179645.828000] [fglrx] free GART = 118222848
[17179645.828000] [fglrx] max single GART = 118222848
[17179645.828000] [fglrx] total LFB = 28307456
[17179645.828000] [fglrx] free LFB = 22016000
[17179645.828000] [fglrx] max single LFB = 22016000
[17179645.828000] [fglrx] total Inv = 0
[17179645.828000] [fglrx] free Inv = 0
[17179645.828000] [fglrx] max single Inv = 0
[17179645.828000] [fglrx] total TIM = 0


页首
 用户资料  
 
2 楼 
 文章标题 :
帖子发表于 : 2007-05-07 13:28 

注册: 2007-04-10 13:44
帖子: 68
地址: 大连
送出感谢: 0 次
接收感谢: 0 次
看看你是不是把 dbus 服务关掉了


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 2 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 3 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译