当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 12 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : 如何查看使用的系统是64位的?
帖子发表于 : 2006-08-31 16:58 

注册: 2005-05-31 19:32
帖子: 156
送出感谢: 0 次
接收感谢: 0 次
intel 64位cpu也用ubuntu-6.06.1-alternate-amd64.iso安装盘吗?


页首
 用户资料  
 
2 楼 
 文章标题 :
帖子发表于 : 2006-08-31 17:24 
头像

注册: 2006-05-22 18:19
帖子: 58
送出感谢: 1
接收感谢: 0 次
运行:
dmesg

查看第一行的内核版本就知道了。


页首
 用户资料  
 
3 楼 
 文章标题 :
帖子发表于 : 2006-09-01 10:37 

注册: 2005-05-31 19:32
帖子: 156
送出感谢: 0 次
接收感谢: 0 次
这是第一行的信息
6>pnp: 00:09: ioport range 0x500-0x53f has been reserved
怎么看?


页首
 用户资料  
 
4 楼 
 文章标题 :
帖子发表于 : 2006-09-06 19:23 

注册: 2006-09-02 0:28
帖子: 55
送出感谢: 0 次
接收感谢: 0 次
h@h-desktop:~$ dmesg
[4294667.296000] Linux version 2.6.15-23-386 (buildd@rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Tue May 23 13:49:40 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
[4294667.296000] BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
[4294667.296000] BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
[4294667.296000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
[4294667.296000] BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
[4294667.296000] 127MB HIGHMEM available.
[4294667.296000] 896MB LOWMEM available.
[4294667.296000] found SMP MP-table at 000ff780
[4294667.296000] On node 0 totalpages: 262064
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000] Normal zone: 225280 pages, LIFO batch:31
[4294667.296000] HighMem zone: 32688 pages, LIFO batch:7
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 ACPIAM ) @ 0x000f7d60
[4294667.296000] ACPI: RSDT (v001 A M I OEMRSDT 0x01000625 MSFT 0x00000097) @ 0x3ffb0000
[4294667.296000] ACPI: FADT (v002 A M I OEMFACP 0x01000625 MSFT 0x00000097) @ 0x3ffb0200
[4294667.296000] ACPI: MADT (v001 A M I OEMAPIC 0x01000625 MSFT 0x00000097) @ 0x3ffb0390
[4294667.296000] ACPI: MCFG (v001 A M I OEMMCFG 0x01000625 MSFT 0x00000097) @ 0x3ffb0400
[4294667.296000] ACPI: SSDT (v001 OEM_ID OEMTBLID 0x00000001 INTL 0x02002026) @ 0x3ffb51c0
[4294667.296000] ACPI: OEMB (v001 A M I AMI_OEM 0x01000625 MSFT 0x00000097) @ 0x3ffc0040
[4294667.296000] ACPI: DSDT (v001 99G2M 99G2M110 0x00000110 INTL 0x02002026) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x4008
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 15:15 APIC version 16
[4294667.296000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[4294667.296000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec10000] gsi_base[24])
[4294667.296000] IOAPIC[1]: apic_id 2, version 17, address 0xfec10000, GSI 24-44[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode: Flat. Using 2 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 50000000 (gap: 40000000:bf7c0000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda9 ro quiet splash
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] mapped IOAPIC to ffffb000 (fec10000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[4294667.296000] Detected 2000.719 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294671.273000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294671.274000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294671.292000] Memory: 1028436k/1048256k available (1976k kernel code, 19148k reserved, 606k data, 288k init, 130752k highmem)
[4294671.292000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294671.352000] Calibrating delay using timer specific routine.. 4002.28 BogoMIPS (lpj=2001141)
[4294671.352000] Security Framework v1.0.0 initialized
[4294671.352000] SELinux: Disabled at boot.
[4294671.352000] Mount-cache hash table entries: 512
[4294671.352000] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[4294671.352000] CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[4294671.352000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[4294671.352000] CPU: L2 Cache: 512K (64 bytes/line)
[4294671.352000] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000010 00000001 00000000 00000001
[4294671.352000] mtrr: v2.0 (20020519)
[4294671.352000] CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 02
[4294671.352000] Enabling fast FPU save and restore... done.
[4294671.352000] Enabling unmasked SIMD FPU exception support... done.
[4294671.352000] Checking 'hlt' instruction... OK.
[4294671.356000] checking if image is initramfs... it is
[4294671.861000] Freeing initrd memory: 6835k freed
[4294671.867000] ACPI: Looking for DSDT ... not found!
[4294671.869000] ENABLING IO-APIC IRQs
[4294671.869000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[4294671.980000] NET: Registered protocol family 16
[4294671.980000] EISA bus registered
[4294671.980000] ACPI: bus type pci registered
[4294671.980000] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[4294671.980000] PCI: Using MMCONFIG
[4294671.980000] ACPI: Subsystem revision 20051216
[4294671.986000] ACPI: Interpreter enabled
[4294671.986000] ACPI: Using IOAPIC for interrupt routing
[4294671.987000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294671.987000] PCI: Probing PCI hardware (bus 00)
[4294671.989000] PCI quirk: region 4000-403f claimed by ali7101 ACPI
[4294671.990000] Boot video device is 0000:01:00.0
[4294671.990000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294672.004000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE2P._PRT]
[4294672.009000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB1._PRT]
[4294672.010000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB2._PRT]
[4294672.010000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB3._PRT]
[4294672.010000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB4._PRT]
[4294672.011000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[4294672.011000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[4294672.011000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[4294672.012000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[4294672.012000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[4294672.012000] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[4294672.012000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[4294672.013000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15), disabled.
[4294672.013000] ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[4294672.013000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294672.013000] pnp: PnP ACPI init
[4294672.017000] pnp: PnP ACPI: found 14 devices
[4294672.017000] PnPBIOS: Disabled by ACPI PNP
[4294672.017000] PCI: Using ACPI for IRQ routing
[4294672.017000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294672.026000] pnp: 00:0b: ioport range 0x290-0x29f has been reserved
[4294672.026000] PCI: Bridge: 0000:00:01.0
[4294672.026000] IO window: e000-efff
[4294672.026000] MEM window: def00000-deffffff
[4294672.026000] PREFETCH window: d0000000-d7ffffff
[4294672.026000] PCI: Bridge: 0000:00:02.0
[4294672.026000] IO window: disabled.
[4294672.026000] MEM window: disabled.
[4294672.026000] PREFETCH window: ddd00000-dddfffff
[4294672.026000] PCI: Bridge: 0000:00:03.0
[4294672.026000] IO window: disabled.
[4294672.026000] MEM window: disabled.
[4294672.026000] PREFETCH window: dde00000-ddefffff
[4294672.026000] PCI: Bridge: 0000:00:04.0
[4294672.026000] IO window: disabled.
[4294672.026000] MEM window: disabled.
[4294672.026000] PREFETCH window: ddf00000-ddffffff
[4294672.026000] PCI: Bridge: 0000:00:11.0
[4294672.026000] IO window: disabled.
[4294672.026000] MEM window: disabled.
[4294672.026000] PREFETCH window: disabled.
[4294672.026000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 29 (level, low) -> IRQ 169
[4294672.026000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[4294672.026000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 34 (level, low) -> IRQ 177
[4294672.026000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[4294672.026000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 39 (level, low) -> IRQ 185
[4294672.026000] PCI: Setting latency timer of device 0000:00:03.0 to 64
[4294672.026000] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 44 (level, low) -> IRQ 193
[4294672.026000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[4294672.026000] PCI: Setting latency timer of device 0000:00:11.0 to 64
[4294672.026000] audit: initializing netlink socket (disabled)
[4294672.026000] audit(1157568367.025:1): initialized
[4294672.026000] highmem bounce pool size: 64 pages
[4294672.026000] VFS: Disk quotas dquot_6.5.1
[4294672.026000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294672.026000] Initializing Cryptographic API
[4294672.026000] io scheduler noop registered
[4294672.026000] io scheduler anticipatory registered
[4294672.026000] io scheduler deadline registered
[4294672.026000] io scheduler cfq registered
[4294672.027000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 29 (level, low) -> IRQ 169
[4294672.027000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[4294672.027000] assign_interrupt_mode Found MSI capability
[4294672.027000] Allocate Port Service[pcie00]
[4294672.027000] Allocate Port Service[pcie01]
[4294672.027000] Allocate Port Service[pcie03]
[4294672.027000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 34 (level, low) -> IRQ 177
[4294672.027000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[4294672.027000] assign_interrupt_mode Found MSI capability
[4294672.027000] Allocate Port Service[pcie00]
[4294672.027000] Allocate Port Service[pcie01]
[4294672.027000] Allocate Port Service[pcie03]
[4294672.027000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 39 (level, low) -> IRQ 185
[4294672.027000] PCI: Setting latency timer of device 0000:00:03.0 to 64
[4294672.027000] assign_interrupt_mode Found MSI capability
[4294672.027000] Allocate Port Service[pcie00]
[4294672.027000] Allocate Port Service[pcie01]
[4294672.027000] Allocate Port Service[pcie03]
[4294672.027000] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 44 (level, low) -> IRQ 193
[4294672.027000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[4294672.027000] assign_interrupt_mode Found MSI capability
[4294672.027000] Allocate Port Service[pcie00]
[4294672.027000] Allocate Port Service[pcie01]
[4294672.027000] Allocate Port Service[pcie03]
[4294672.027000] isapnp: Scanning for PnP cards...
[4294672.384000] isapnp: No Plug & Play device found
[4294672.393000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[4294672.395000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294672.395000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294672.395000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294672.396000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294672.397000] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294672.397000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294672.397000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294672.397000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294672.397000] mice: PS/2 mouse device common for all mice
[4294672.398000] EISA: Probing bus 0 at eisa.0
[4294672.398000] Cannot allocate resource for EISA slot 4
[4294672.398000] EISA: Detected 0 cards.
[4294672.398000] NET: Registered protocol family 2
[4294672.407000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294672.407000] TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
[4294672.408000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[4294672.408000] TCP: Hash tables configured (established 262144 bind 65536)
[4294672.408000] TCP reno registered
[4294672.408000] TCP bic registered
[4294672.408000] NET: Registered protocol family 1
[4294672.408000] NET: Registered protocol family 8
[4294672.408000] NET: Registered protocol family 20
[4294672.408000] Using IPI Shortcut mode
[4294672.408000] ACPI wakeup devices:
[4294672.408000] PE2P PS2K PS2M UAR1 LAN USB0 USB1 USB2 UB20 AZAL PEB1 PEB2 PEB3 PEB4
[4294672.408000] ACPI: (supports S0 S1 S3 S4 S5)
[4294672.408000] Freeing unused kernel memory: 288k freed
[4294672.421000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294672.451000] vga16fb: initializing
[4294672.451000] vga16fb: mapped to 0xc00a0000
[4294672.588000] Console: switching to colour frame buffer device 80x25
[4294672.588000] fb0: VGA16 VGA frame buffer device
[4294673.739000] Capability LSM initialized
[4294674.248000] ALI15X3: IDE controller at PCI slot 0000:00:16.0
[4294674.248000] ACPI: PCI Interrupt 0000:00:16.0[A] -> GSI 21 (level, low) -> IRQ 50
[4294674.248000] ALI15X3: chipset revision 199
[4294674.248000] ALI15X3: not 100% native mode: will probe irqs later
[4294674.248000] ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
[4294674.248000] ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio
[4294674.248000] Probing IDE interface ide0...
[4294674.512000] hda: Maxtor 6L160P0, ATA DISK drive
[4294675.125000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294675.125000] Probing IDE interface ide1...
[4294675.797000] hdc: ATAPI CDROM 52X, ATAPI CD/DVD-ROM drive
[4294676.103000] ide1 at 0x170-0x177,0x376 on irq 15
[4294676.109000] hda: max request size: 1024KiB
[4294676.130000] hda: 320173056 sectors (163928 MB) w/8192KiB Cache, CHS=19929/255/63, UDMA(133)
[4294676.132000] hda: cache flushes supported
[4294676.132000] hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 hda10 >
[4294676.224000] hdc: ATAPI 52X CD-ROM drive, 128kB Cache, UDMA(33)
[4294676.224000] Uniform CD-ROM driver Revision: 3.20
[4294677.773000] SCSI subsystem initialized
[4294677.774000] ACPI: bus type scsi registered
[4294677.774000] libata version 1.20 loaded.
[4294677.775000] ahci 0000:00:16.1: version 1.2
[4294677.775000] ACPI: PCI Interrupt 0000:00:16.1[A] -> GSI 21 (level, low) -> IRQ 50
[4294683.176000] ahci 0000:00:16.1: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[4294683.176000] ahci 0000:00:16.1: flags: ncq ilck pm led clo pmp pio slum part
[4294683.176000] ata1: SATA max UDMA/133 cmd 0xF8886500 ctl 0x0 bmdma 0x0 irq 50[4294683.176000] ata2: SATA max UDMA/133 cmd 0xF8886580 ctl 0x0 bmdma 0x0 irq 50[4294683.176000] ata3: SATA max UDMA/133 cmd 0xF8886600 ctl 0x0 bmdma 0x0 irq 50[4294683.176000] ata4: SATA max UDMA/133 cmd 0xF8886680 ctl 0x0 bmdma 0x0 irq 50[4294683.378000] ata1: no device found (phy stat 00000000)
[4294683.378000] scsi0 : ahci
[4294683.580000] ata2: no device found (phy stat 00000000)
[4294683.580000] scsi1 : ahci
[4294683.782000] ata3: no device found (phy stat 00000000)
[4294683.782000] scsi2 : ahci
[4294683.984000] ata4: no device found (phy stat 00000000)
[4294683.984000] scsi3 : ahci
[4294684.052000] usbcore: registered new driver usbfs
[4294684.052000] usbcore: registered new driver hub
[4294684.055000] ACPI: PCI Interrupt 0000:00:13.3[D] -> GSI 23 (level, low) -> IRQ 58
[4294684.055000] ehci_hcd 0000:00:13.3: EHCI Host Controller
[4294684.055000] ehci_hcd 0000:00:13.3: debug port 1
[4294684.100000] ehci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 1
[4294684.100000] ehci_hcd 0000:00:13.3: irq 58, io mem 0xdeeef800
[4294684.100000] ehci_hcd 0000:00:13.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294684.101000] hub 1-0:1.0: USB hub found
[4294684.101000] hub 1-0:1.0: 8 ports detected
[4294684.114000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[4294684.114000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 17 (level, low) -> IRQ 66
[4294684.114000] ohci_hcd 0000:00:13.0: OHCI Host Controller
[4294684.202000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[4294684.202000] ohci_hcd 0000:00:13.0: irq 66, io mem 0xdeeee000
[4294684.255000] hub 2-0:1.0: USB hub found
[4294684.255000] hub 2-0:1.0: 3 ports detected
[4294684.356000] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 18 (level, low) -> IRQ 74
[4294684.356000] ohci_hcd 0000:00:13.1: OHCI Host Controller
[4294684.356000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[4294684.356000] ohci_hcd 0000:00:13.1: irq 74, io mem 0xdeeed000
[4294684.409000] hub 3-0:1.0: USB hub found
[4294684.409000] hub 3-0:1.0: 3 ports detected
[4294684.510000] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 19 (level, low) -> IRQ 82
[4294684.510000] ohci_hcd 0000:00:13.2: OHCI Host Controller
[4294684.510000] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[4294684.510000] ohci_hcd 0000:00:13.2: irq 82, io mem 0xdeeec000
[4294684.563000] hub 4-0:1.0: USB hub found
[4294684.563000] hub 4-0:1.0: 3 ports detected
[4294684.729000] usb 3-1: new full speed USB device using ohci_hcd and address 2[4294684.854000] Attempting manual resume
[4294684.873000] EXT3-fs: mounted filesystem with ordered data mode.
[4294684.902000] kjournald starting. Commit interval 5 seconds
[4294685.093000] usb 3-2: new full speed USB device using ohci_hcd and address 3[4294692.313000] Linux agpgart interface v0.101 (c) Dave Jones
[4294692.617000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294692.700000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294692.774000] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
[4294692.774000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 20 (level, low) -> IRQ 90
[4294692.804000] eth0: ULi M5263 at pci0000:00:12.0, 00:13:8f:86:f0:19, irq 90.
[4294692.857000] ali15x3_smbus 0000:00:15.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
[4294692.857000] ali15x3_smbus 0000:00:15.1: ALI15X3 not detected, module not inserted.
[4294692.935000] ali1535_smbus 0000:00:15.1: ALI1535_smb region uninitialized - upgrade BIOS?
[4294692.935000] ali1535_smbus 0000:00:15.1: ALI1535 not detected, module not inserted.
[4294693.015000] input: PC Speaker as /class/input/input1
[4294693.121000] Real Time Clock Driver v1.12
[4294693.450000] parport: PnPBIOS parport detected.
[4294693.450000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[4294693.627000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[4294693.840000] ts: Compaq touchscreen protocol output
[4294693.972000] Linux video capture interface: v1.00
[4294694.002000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0028
[4294694.002000] usbcore: registered new driver usblp
[4294694.002000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[4294694.021000] ACPI: PCI Interrupt 0000:00:14.0[C] -> GSI 22 (level, low) -> IRQ 98
[4294694.054000] drivers/usb/media/spca5xx/spca5xx-main.c: USB SPCA5XX camera found. Type Vimicro Zc301P 0x301b
[4294694.109000] hda_codec: Unknown model for ALC861, trying auto-probe from BIOS...
[4294694.362000] usbcore: registered new driver spca5xx
[4294694.362000] drivers/usb/media/spca5xx/spca5xx-main.c: spca5xx driver 00.57.08 registered
[4294694.416000] NET: Registered protocol family 17
[4294694.726000] lp0: using parport0 (interrupt-driven).
[4294694.911000] Adding 4996172k swap on /dev/hda10. Priority:-1 extents:1 across:4996172k
[4294695.080000] EXT3 FS on hda9, internal journal
[4294695.200000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294695.200000] md: bitmap version 4.39
[4294695.755000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294696.140000] uli526x: eth0 NIC Link is Up 100 Mbps Full duplex
[4294696.446000] cdrom: open failed.
[4294716.437000] kjournald starting. Commit interval 5 seconds
[4294716.437000] EXT3 FS on hda8, internal journal
[4294716.437000] EXT3-fs: mounted filesystem with ordered data mode.
[4294721.714000] ACPI: Power Button (FF) [PWRF]
[4294721.714000] ACPI: Power Button (CM) [PWRB]
[4294721.793000] ibm_acpi: ec object not found
[4294721.811000] pcc_acpi: loading...
[4294722.118000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4)
[4294722.118000] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x6 (1400 mV)
[4294722.118000] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x8 (1350 mV)
[4294722.118000] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
[4294722.118000] cpu_init done, current fid 0xc, vid 0x6
[4294723.549000] apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
[4294723.549000] apm: overridden by ACPI.
[4294723.774000] [drm] Initialized drm 1.0.1 20051102
[4294723.782000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 25 (level, low) -> IRQ 106
[4294723.782000] [drm] Initialized radeon 1.24.0 20060225 on minor 0
[4294729.061000] [drm] Setting GART location based on new memory map
[4294729.061000] [drm] Loading R300 Microcode
[4294729.061000] [drm] writeback test succeeded in 1 usecs
[4294809.978000] NET: Registered protocol family 10
[4294809.978000] lo: Disabled Privacy Extensions
[4294809.978000] IPv6 over IPv4 tunneling driver
[4294820.491000] eth0: no IPv6 routers present


页首
 用户资料  
 
5 楼 
 文章标题 : Re: 如何查看使用的系统是64位的?
帖子发表于 : 2006-09-06 20:51 
头像

注册: 2005-08-29 14:49
帖子: 1119
地址: 杭州
送出感谢: 0 次
接收感谢: 3
field 写道:
intel 64位cpu也用ubuntu-6.06.1-alternate-amd64.iso安装盘吗?


intel 64 有自己专门的内核版本,不能用 amd64 ,两个 64位有区别


_________________
用心×恒 | 豆瓣 | 门户 | Blog


页首
 用户资料  
 
6 楼 
 文章标题 :
帖子发表于 : 2006-09-07 19:04 

注册: 2005-05-31 19:32
帖子: 156
送出感谢: 0 次
接收感谢: 0 次
那Intel 64用哪个安装版本呢?
具体的在下面ubuntu各版本下载主页上的哪个是支持intel 64的呢?
http://mirror.lupaworld.com/ubuntu/releases/6.06/


页首
 用户资料  
 
7 楼 
 文章标题 : 就是amd64的那个版本了
帖子发表于 : 2006-09-07 19:18 
头像

注册: 2006-01-19 11:55
帖子: 1114
地址: HUST
送出感谢: 0 次
接收感谢: 0 次
就这个版本了,没问题的


_________________
http://www.classfoo.org


页首
 用户资料  
 
8 楼 
 文章标题 : 不过弄好后别用amd的内核就可以了
帖子发表于 : 2006-09-07 19:19 
头像

注册: 2006-01-19 11:55
帖子: 1114
地址: HUST
送出感谢: 0 次
接收感谢: 0 次
不过弄好后别用amd的内核就可以了


_________________
http://www.classfoo.org


页首
 用户资料  
 
9 楼 
 文章标题 : Re: 如何查看使用的系统是64位的?
帖子发表于 : 2006-09-11 21:46 
头像

注册: 2005-06-30 15:46
帖子: 2245
地址: 成都
送出感谢: 0 次
接收感谢: 0 次
leal 写道:
field 写道:
intel 64位cpu也用ubuntu-6.06.1-alternate-amd64.iso安装盘吗?


intel 64 有自己专门的内核版本,不能用 amd64 ,两个 64位有区别


区别极小。

AMD的先出来叫AMD64,Intel的叫EM64T,其实是兼容的,Intel模仿别人的。一般又称之为X86_64。所有的一般所说64位都是兼容支持这两者。



Intel还有个安腾,那叫IA64,才是大不一样的64位,Ubuntu不支持。


_________________
Humanity to others // 己所不欲,勿施与人
Laptop: ThinkPad X220 --- Win7 Home / Ubuntu 12.04
Desktop: Win7/Ubuntu 12.04
Server: Ubuntu12.04


页首
 用户资料  
 
10 楼 
 文章标题 :
帖子发表于 : 2006-09-23 13:50 

注册: 2006-09-21 15:09
帖子: 43
送出感谢: 0 次
接收感谢: 0 次
我的也是INTEL64的可是一直都是用的是32位的


页首
 用户资料  
 
11 楼 
 文章标题 : 你好,我是新手
帖子发表于 : 2006-12-17 15:26 

注册: 2006-12-16 14:35
帖子: 4
送出感谢: 0 次
接收感谢: 0 次
Tenyears
你好 我现在用的笔记本 AMD64 1.6G 我现在用vmware装不上ubuntu for amd64
提示我的机器 不是 amd64的 怎么回事啊 我也在南京的


页首
 用户资料  
 
12 楼 
 文章标题 :
帖子发表于 : 2007-01-17 14:39 

注册: 2006-09-15 9:22
帖子: 25
地址: GZ
送出感谢: 0 次
接收感谢: 0 次
dmesg显示的信息不代表什么,自己编译的内核,版本都是自己写的,我都不会写什么64的。

AIX下有个命令可以看:bootinfo -y
不知道ubuntu下有没有,是不是:uname -r

不过uname -r也是不准确的,对于自己编译过内核的人来说```


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 12 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:Bing [Bot] 和 1 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译