[问题]救命呀,我升级到8.04后,内核出问题了。(已解决,2楼、3楼有新问题了)

系统安装、升级讨论
版面规则
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
回复
头像
ljj_jjl2008
论坛版主
帖子: 14255
注册时间: 2007-09-16 8:29

[问题]救命呀,我升级到8.04后,内核出问题了。(已解决,2楼、3楼有新问题了)

#1

帖子 ljj_jjl2008 » 2008-01-27 7:48

升级时有提示,问怎么修改menu.lst文件,选项是英文的,我英语水平低,胡乱选择了一个,结果启动起来后还是使用的2.6.22-14的内核。我于是手工修改了menu.lst文件,照着2.6.22-14启动项的样子,加上了2.6.24-4的启动行,然后重新起动,但是,选择2.6.24-4的行来启动,进度条是来回晃动,就是不往前走。

帮帮我把,谢谢。

下面是menu.lst文件的内容:
title Ubuntu 7.10, kernel 2.6.24-4-generic
root (hd0,3)
kernel /boot/vmlinuz-2.6.24-4-generic root=UUID=702fabca-8b3a-487f-8a92-7c895856bbe7 ro quiet splash
initrd /boot/initrd.img-2.6.24-4-generic
quiet

title Ubuntu 7.10, kernel 2.6.24-4-generic (recovery mode)
root (hd0,3)
kernel /boot/vmlinuz-2.6.24-4-generic root=UUID=702fabca-8b3a-487f-8a92-7c895856bbe7 ro single
initrd /boot/initrd.img-2.6.24-4-generic

title Ubuntu 7.10, kernel 2.6.22-14-generic
root (hd0,3)
kernel /boot/vmlinuz-2.6.22-14-generic root=UUID=702fabca-8b3a-487f-8a92-7c895856bbe7 ro quiet splash
initrd /boot/initrd.img-2.6.22-14-generic
quiet

title Ubuntu 7.10, memtest86+
root (hd0,3)
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Windows 2003
root (hd0,0)
savedefault
makeactive
chainloader +1
上次由 ljj_jjl2008 在 2008-01-27 10:00,总共编辑 1 次。
头像
ljj_jjl2008
论坛版主
帖子: 14255
注册时间: 2007-09-16 8:29

#2

帖子 ljj_jjl2008 » 2008-01-27 9:48

今天上午发现内核又有更新了,到2.6.24-5了,就删除了2.6.24-4的内核,安装了2.6.24-5的,选择如何调整menu.lst时选的另一项,就正常了。
现在的menu.lst:
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=702fabca-8b3a-487f-8a92-7c895856bbe7 ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,3)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title Ubuntu hardy (development branch), kernel 2.6.24-5-rt
root (hd0,3)
kernel /boot/vmlinuz-2.6.24-5-rt root=UUID=702fabca-8b3a-487f-8a92-7c895856bbe7 ro quiet splash
initrd /boot/initrd.img-2.6.24-5-rt
quiet

#title Ubuntu hardy (development branch), kernel 2.6.24-5-rt (recovery mode)
#root (hd0,3)
#kernel /boot/vmlinuz-2.6.24-5-rt root=UUID=702fabca-8b3a-487f-8a92-7c895856bbe7 ro single
#initrd /boot/initrd.img-2.6.24-5-rt

title Ubuntu hardy (development branch), kernel 2.6.24-5-generic
root (hd0,3)
kernel /boot/vmlinuz-2.6.24-5-generic root=UUID=702fabca-8b3a-487f-8a92-7c895856bbe7 ro quiet splash
initrd /boot/initrd.img-2.6.24-5-generic
quiet

#title Ubuntu hardy (development branch), kernel 2.6.24-5-generic (recovery mode)
#root (hd0,3)
#kernel /boot/vmlinuz-2.6.24-5-generic root=UUID=702fabca-8b3a-487f-8a92-7c895856bbe7 ro single
#initrd /boot/initrd.img-2.6.24-5-generic

title Ubuntu hardy (development branch), kernel 2.6.22-14-generic
root (hd0,3)
kernel /boot/vmlinuz-2.6.22-14-generic root=UUID=702fabca-8b3a-487f-8a92-7c895856bbe7 ro quiet splash
initrd /boot/initrd.img-2.6.22-14-generic
quiet

title Ubuntu hardy (development branch), kernel 2.6.22-14-generic (recovery mode)
root (hd0,3)
kernel /boot/vmlinuz-2.6.22-14-generic root=UUID=702fabca-8b3a-487f-8a92-7c895856bbe7 ro single
initrd /boot/initrd.img-2.6.22-14-generic

title Ubuntu hardy (development branch), memtest86+
root (hd0,3)
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Windows 2003
root (hd0,0)
savedefault
makeactive
chainloader +1
谢谢大家了。

现在有新问题:kde3.5.8里面,刚进入系统时,很多程序成假死状态,需要杀死scim的进程才能正常。原来7.10下面没有问题的,我暂时不想还ficx,有办法调整一下么?
头像
ljj_jjl2008
论坛版主
帖子: 14255
注册时间: 2007-09-16 8:29

#3

帖子 ljj_jjl2008 » 2008-01-27 9:58

还有,永中office不能用了(听说是java问题),vbox也不能用了,各位大侠有办法么?
空空如也人
帖子: 1
注册时间: 2008-01-24 19:43

#4

帖子 空空如也人 » 2008-01-27 10:28

楼上的,系统带的那个不够你用的阿!
头像
ljj_jjl2008
论坛版主
帖子: 14255
注册时间: 2007-09-16 8:29

#5

帖子 ljj_jjl2008 » 2008-01-27 10:52

新内核快呀。
现在发现永中office不能启动和内核没有关系,老内核下也是不能启动,应该是8.04的问题。
skiptoo
帖子: 52
注册时间: 2007-05-11 12:21

#6

帖子 skiptoo » 2008-01-27 14:31

看来楼主爱折腾阿
compaq 3202 au
AMD Turion64/XL56/2G/120G/nv6150
Ubuntu 7.10 Gutsy Gibbon/2.6.22-15
头像
ljj_jjl2008
论坛版主
帖子: 14255
注册时间: 2007-09-16 8:29

#7

帖子 ljj_jjl2008 » 2008-01-27 14:59

永中的问题解决了,方方法如下:
viewtopic.php?p=613569#613569
回复