[原创]i915系列显卡3D驱动修复以及[翻译]aiglx的应用(xgl-like)。
版面规则
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
- gnix_oag
- 帖子: 1994
- 注册时间: 2005-05-19 18:38
- 来自: 湖南永州
- 联系:
-
- 帖子: 1074
- 注册时间: 2006-01-18 15:01
更新:新的安装方法
原资料还是那个英文论坛,一楼。
加入以下源:
然后更新。
接着
放心,这只是因为源里的这个包好像有bug,要降级使用回原来系统的包,在之后会问你是不是要降级,回答y就好了。
还有gnome-session
用http://gandalfn.club.fr/ubuntu/index.php的就好了。
还有最新的drm模块。从cvs更新的。
然后修改/etc/X11/xorg.conf
将默认的色深改为16。(新的mesa的要求,以后应该会支持24)
登出,在命令行下重启gdm
就好了。
另外对flash的支持好像不行,等解决了在发帖。
加入以下源:
代码: 全选
deb http://xgl.compiz.info/ dapper main aiglx
然后更新。
接着
代码: 全选
sudo aptitude remove libcairo2
还有gnome-session
用http://gandalfn.club.fr/ubuntu/index.php的就好了。
还有最新的drm模块。从cvs更新的。
代码: 全选
cvs -d ":pserver:anoncvs@cvs.freedesktop.org:/cvs/dri" co drm
cd drm/linux-core/
make
sudo cp *.ko /lib/modules/`uname -r`/kernel/drivers/char/drm
然后修改/etc/X11/xorg.conf
将默认的色深改为16。(新的mesa的要求,以后应该会支持24)
登出,在命令行下重启gdm
代码: 全选
sudo /etc/init.d/gdm restart
另外对flash的支持好像不行,等解决了在发帖。
- choukuangjay
- 帖子: 274
- 注册时间: 2006-01-17 14:39
- 来自: Nanking
- 联系:
-
- 帖子: 2
- 注册时间: 2011-02-12 23:03
Re: [原创]i915系列显卡3D驱动修复以及[翻译]aiglx的应用(xgl-like)。
安装intel GM900显卡驱动的过程
下载了dri-I915-v1.1-20041217.i386.rpm
wget -c http://downloadmirror.intel.com/df-supp ... 7.i386.rpm
使用alien命令将起生成为deb包
dpkg -i dri-I915-v1.1-20041217.i386.deb
就搞定了
如果分辨率还有问题就要安装915resolution
--[参考资料 ]
http://wiki.ubuntu.org.cn/EdgyGuide#hea ... 35f52dcf9e
How to install Graphics Driver (Intel)
Note: This driver is for Intel® 82830M, 82845G, 82852GM, 82855GM, 82865G, and 82915G/GM graphics controller-based products only.
1.
Read #General Notes
2.
Read #How to install .rpm to .deb Converter (Alien)
wget -c http://downloadmirror.intel.com/df-supp ... 7.i386.rpm
sudo alien dri-I915-v1.1-20041217.i386.rpm
sudo dpkg -i dri-i915_v1.1-20041218_i386.deb
How to Correct the Graphics Resolution (Intel)
1.
Read #How to enable Large Widescreen Support if you have a larger (>20") monitor
2. Intel 915g, 945g, etc. graphics chipsets only have a limited set of resolutions initially installed, despite the correct driver being detected.
3. Install the resolution altering tool:
sudo apt-get install 915resolution
1. Run the following to see the availible modes:
915resolution -l
1. Choose a resolution you don't need and replace, for example the following changes 1920x1440 to 1920x1200
915resolution 5c 1920 1200
1.
This should add the option for that resolution to the "System>Preferences>Screen Resolution" tool.
2. If it works correctly then you can make the change permanent:
sudo gedit /etc/rc.local
1. Simply add the command you typed in above before:
exit 0
下载了dri-I915-v1.1-20041217.i386.rpm
wget -c http://downloadmirror.intel.com/df-supp ... 7.i386.rpm
使用alien命令将起生成为deb包
dpkg -i dri-I915-v1.1-20041217.i386.deb
就搞定了
如果分辨率还有问题就要安装915resolution
--[参考资料 ]
http://wiki.ubuntu.org.cn/EdgyGuide#hea ... 35f52dcf9e
How to install Graphics Driver (Intel)
Note: This driver is for Intel® 82830M, 82845G, 82852GM, 82855GM, 82865G, and 82915G/GM graphics controller-based products only.
1.
Read #General Notes
2.
Read #How to install .rpm to .deb Converter (Alien)
wget -c http://downloadmirror.intel.com/df-supp ... 7.i386.rpm
sudo alien dri-I915-v1.1-20041217.i386.rpm
sudo dpkg -i dri-i915_v1.1-20041218_i386.deb
How to Correct the Graphics Resolution (Intel)
1.
Read #How to enable Large Widescreen Support if you have a larger (>20") monitor
2. Intel 915g, 945g, etc. graphics chipsets only have a limited set of resolutions initially installed, despite the correct driver being detected.
3. Install the resolution altering tool:
sudo apt-get install 915resolution
1. Run the following to see the availible modes:
915resolution -l
1. Choose a resolution you don't need and replace, for example the following changes 1920x1440 to 1920x1200
915resolution 5c 1920 1200
1.
This should add the option for that resolution to the "System>Preferences>Screen Resolution" tool.
2. If it works correctly then you can make the change permanent:
sudo gedit /etc/rc.local
1. Simply add the command you typed in above before:
exit 0