分页: 1 / 1

[问题]为什么少了一些内存

发表于 : 2008-07-18 23:26
lijiangt
ubuntu hardy
AMD64
1G内存,集成显卡,分了32M内存给显卡,剩余内存应该是992M,windows里面显示内存容量就是992M,但是在系统监视器里面显示909.3M,还有80多M内存消失了,请问是什么问题?

代码: 全选

lijt@lijt-laptop-hasee:~$ dmesg|grep Memory
[   12.045791] Memory: 923284k/1015616k available (2489k kernel code,[color=red] 91944k reserved,[/color] 1318k data, 320k init)
lijt@lijt-laptop-hasee:~$ free
             total       used       free     shared    buffers     cached
Mem:        931128     920900      10228          0       5588     409068
-/+ buffers/cache:     506244     424884
Swap:      1028120      44732     983388
lijt@lijt-laptop-hasee:~$ cat /proc/meminfo 
MemTotal:       931128 kB
MemFree:          9536 kB
Buffers:          5588 kB
Cached:         407852 kB
SwapCached:       2768 kB
Active:         556184 kB
Inactive:       243056 kB
SwapTotal:     1028120 kB
SwapFree:       983388 kB
Dirty:             104 kB
Writeback:           0 kB
AnonPages:      383032 kB
Mapped:         120252 kB
Slab:            87476 kB
SReclaimable:    68656 kB
SUnreclaim:      18820 kB
PageTables:      18632 kB
NFS_Unstable:        0 kB
Bounce:              0 kB
CommitLimit:   1493684 kB
Committed_AS:   936744 kB
VmallocTotal: 34359738367 kB
VmallocUsed:      6208 kB
VmallocChunk: 34359732155 kB
lijt@lijt-laptop-hasee:~$ 
[/code]

完整的dmesg输出

发表于 : 2008-07-18 23:34
lijiangt

代码: 全选

lijt@lijt-laptop-hasee:~$ dmesg 
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.24-19-generic (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 18 14:15:37 UTC 2008 (Ubuntu 2.6.24-19.34-generic)
[    0.000000] Command line: root=UUID=06f98f0e-1dbc-412d-ad00-cd247685a74d ro quiet splash
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003dfd0000 (usable)
[    0.000000]  BIOS-e820: 000000003dfd0000 - 000000003dfdf000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003dfdf000 - 000000003e000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 253904) 1 entries of 3200 used
[    0.000000] end_pfn_map = 1048576
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP signature @ 0xFFFF8100000F7510 checksum 0
[    0.000000] ACPI: RSDP 000F7510, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT 3DFD0000, 0030 (r1 A M I  OEMRSDT   2000623 MSFT       97)
[    0.000000] ACPI: FACP 3DFD0200, 0081 (r2 A M I  OEMFACP   2000623 MSFT       97)
[    0.000000] ACPI Warning (tbutils-0217): Incorrect checksum in table [FACP] -  5E, should be 08 [20070126]
[    0.000000] ACPI: DSDT 3DFD03F0, 343D (r1 UW                     0 INTL  2002026)
[    0.000000] ACPI: FACS 3DFDF000, 0040
[    0.000000] ACPI: APIC 3DFD0390, 0054 (r1 A M I  OEMAPIC   2000623 MSFT       97)
[    0.000000] ACPI: OEMB 3DFDF040, 0109 (r1 A M I  AMI_OEM   2000623 MSFT       97)
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] CPU has 1 num_cores
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000003dfd0000
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 253904) 1 entries of 3200 used
[    0.000000] Bootmem setup node 0 0000000000000000-000000003dfd0000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1048576
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   253904
[    0.000000] On node 0 totalpages: 253807
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1219 pages reserved
[    0.000000]   DMA zone: 2724 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 3415 pages used for memmap
[    0.000000]   DMA32 zone: 246393 pages, LIFO batch:31
[    0.000000]   Normal zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI Warning (tbutils-0217): Incorrect checksum in table [FACP] -  5E, should be 08 [20070126]
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 3e000000:c1f80000)
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 34656 bytes of per cpu data
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 249117
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=UUID=06f98f0e-1dbc-412d-ad00-cd247685a74d ro quiet splash
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] TSC calibrated against PM_TIMER
[   11.960362] time.c: Detected 1596.473 MHz processor.
[   11.961084] Console: colour VGA+ 80x25
[   11.961088] console [tty0] enabled
[   11.961106] Checking aperture...
[   11.961109] CPU 0: aperture @ e0000000 size 32 MB
[   11.961111] Aperture too small (32 MB)
[   11.961116] AGP bridge at 00:00:00
[   11.961120] Aperture from AGP @ e0000000 size 32 MB (APSIZE f38)
[   11.961122] Aperture too small (32 MB)
[   11.961123] Your BIOS doesn't leave a aperture memory hole
[   11.961125] Please enable the IOMMU option in the BIOS setup
[   11.961127] This costs you 64 MB of RAM
[   12.030669] Mapping aperture over 65536 KB of RAM @ 4000000
[   12.030676] swsusp: Registered nosave memory region: 0000000004000000 - 0000000008000000
[   12.045791] Memory: 923284k/1015616k available (2489k kernel code, 91944k reserved, 1318k data, 320k init)
[   12.045839] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[   12.122260] Calibrating delay using timer specific routine.. 3194.74 BogoMIPS (lpj=6389483)
[   12.122306] Security Framework initialized
[   12.122315] SELinux:  Disabled at boot.
[   12.122332] AppArmor: AppArmor initialized
[   12.122336] Failure registering capabilities with primary security module.
[   12.122456] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   12.123615] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[   12.124168] Mount-cache hash table entries: 256
[   12.124343] Initializing cgroup subsys ns
[   12.124348] Initializing cgroup subsys cpuacct
[   12.124364] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   12.124367] CPU: L2 Cache: 512K (64 bytes/line)
[   12.124370] CPU 0/0 -> Node 0
[   12.124396] SMP alternatives: switching to UP code
[   12.125030] Freeing SMP alternatives: 24k freed
[   12.125463] Early unpacking initramfs... done
[   12.507442] ACPI: Core revision 20070126
[   12.507502] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   12.550999] Using local APIC timer interrupts.
[   12.613602] APIC timer calibration result 12472441
[   12.613604] Detected 12.472 MHz APIC timer.
[   12.613662] Brought up 1 CPUs
[   12.613720] CPU0 attaching sched-domain:
[   12.613722]  domain 0: span 01
[   12.613724]   groups: 01
[   12.613897] net_namespace: 120 bytes
[   12.614347] Time: 23:11:18  Date: 07/18/08
[   12.614383] NET: Registered protocol family 16
[   12.614586] ACPI: bus type pci registered
[   12.614666] PCI: Using configuration type 1
[   12.616183] ACPI: EC: Look up EC in DSDT
[   12.617821] ACPI: Interpreter enabled
[   12.617824] ACPI: (supports S0 S1 S3 S4 S5)
[   12.617841] ACPI: Using IOAPIC for interrupt routing
[   12.620650] ACPI: EC: non-query interrupt received, switching to interrupt mode
[   12.623802] ACPI: EC: GPE = 0x2, I/O: command/status = 0x66, data = 0x62
[   12.623806] ACPI: EC: driver started in interrupt mode
[   12.623891] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   12.624035] Enabling SiS 96x SMBus.
[   12.624449] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   12.653316] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15)
[   12.653414] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[   12.653511] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 12 14 15)
[   12.653615] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
[   12.653712] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 14 15)
[   12.653810] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 7 10 11 12 14 15)
[   12.653906] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[   12.654000] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 7 10 11 12 14 15)
[   12.654108] ACPI Warning (tbutils-0217): Incorrect checksum in table [FACP] -  5E, should be 08 [20070126]
[   12.654119] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  04, should be FD [20070126]
[   12.654125] Linux Plug and Play Support v0.97 (c) Adam Belay
[   12.654154] pnp: PnP ACPI init
[   12.654162] ACPI: bus type pnp registered
[   12.655771] pnp: PnP ACPI: found 10 devices
[   12.655774] ACPI: ACPI bus type pnp unregistered
[   12.656025] PCI: Using ACPI for IRQ routing
[   12.656029] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   12.669616] NET: Registered protocol family 8
[   12.669618] NET: Registered protocol family 20
[   12.669689] agpgart: Detected AGP bridge 0
[   12.669693] agpgart: Aperture pointing to RAM
[   12.669728] agpgart: Aperture from AGP @ e0000000 size 32 MB
[   12.671261] agpgart: AGP aperture is 32M @ 0xe0000000
[   12.671341] AppArmor: AppArmor Filesystem Enabled
[   12.673581] Time: tsc clocksource has been installed.
[   12.681625] system 00:07: ioport range 0x480-0x48f has been reserved
[   12.681628] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[   12.681631] system 00:07: ioport range 0x800-0x87f has been reserved
[   12.681634] system 00:07: ioport range 0x880-0x8ff has been reserved
[   12.681637] system 00:07: ioport range 0xc00-0xc1f has been reserved
[   12.681642] system 00:07: iomem range 0xfff80000-0xffffffff could not be reserved
[   12.681645] system 00:07: iomem range 0xffe80000-0xffefffff has been reserved
[   12.681648] system 00:07: iomem range 0xfed00000-0xfed003ff has been reserved
[   12.681656] system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
[   12.681659] system 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved
[   12.681667] system 00:09: iomem range 0x0-0x9ffff could not be reserved
[   12.681670] system 00:09: iomem range 0xc0000-0xd0fff has been reserved
[   12.681673] system 00:09: iomem range 0xe0000-0xfffff could not be reserved
[   12.681676] system 00:09: iomem range 0x100000-0x3fffffff could not be reserved
[   12.681678] system 00:09: iomem range 0x0-0x0 could not be reserved
[   12.682080] PCI: Bridge: 0000:00:01.0
[   12.682083]   IO window: d000-dfff
[   12.682087]   MEM window: dfe00000-dfefffff
[   12.682090]   PREFETCH window: cfd00000-dfcfffff
[   12.682140] NET: Registered protocol family 2
[   12.717649] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[   12.718197] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[   12.720541] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   12.721686] TCP: Hash tables configured (established 131072 bind 65536)
[   12.721690] TCP reno registered
[   12.733718] checking if image is initramfs... it is
[   13.185251] Switched to high resolution mode on CPU 0
[   13.473119] Freeing initrd memory: 7492k freed
[   13.481806] audit: initializing netlink socket (disabled)
[   13.481822] audit(1216422678.468:1): initialized
[   13.483929] VFS: Disk quotas dquot_6.5.1
[   13.484012] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   13.484161] io scheduler noop registered
[   13.484164] io scheduler anticipatory registered
[   13.484166] io scheduler deadline registered
[   13.484275] io scheduler cfq registered (default)
[   13.545195] Boot video device is 0000:01:00.0
[   13.575325] Real Time Clock Driver v1.12ac
[   13.575418] Linux agpgart interface v0.102
[   13.575421] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   13.576506] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   13.576575] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   13.576665] PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   13.581284] i8042.c: Detected active multiplexing controller, rev 1.0.
[   13.582509] serio: i8042 KBD port at 0x60,0x64 irq 1
[   13.582513] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   13.582516] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   13.582518] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   13.582520] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   13.592992] mice: PS/2 mouse device common for all mice
[   13.593031] cpuidle: using governor ladder
[   13.593033] cpuidle: using governor menu
[   13.593193] NET: Registered protocol family 1
[   13.593302] registered taskstats version 1
[   13.593420]   Magic number: 0:416:201
[   13.593578] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   13.593581] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   13.593583] EDD information not available.
[   13.593592] Freeing unused kernel memory: 320k freed
[   13.597787] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   14.828078] ACPI: CPU0 (power states: C1[C1] C2[C2])
[   14.829214] ACPI: Thermal Zone [THRM] (75 C)
[   15.499630] SCSI subsystem initialized
[   15.563595] libata version 3.00 loaded.
[   15.568318] usbcore: registered new interface driver usbfs
[   15.568344] usbcore: registered new interface driver hub
[   15.593904] usbcore: registered new device driver usb
[   15.603552] sis900.c: v1.08.10 Apr. 2 2006
[   15.603622] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 19
[   15.604798] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[   15.614344] 0000:00:04.0: Using transceiver found at address 1 as default
[   15.620262] eth0: SiS 900 PCI Fast Ethernet at 0xe400, IRQ 19, 00:03:0d:2f:8c:a9
[   15.682278] pata_sis 0000:00:02.5: version 0.5.2
[   15.690890] scsi0 : pata_sis
[   15.700954] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   15.711508] scsi1 : pata_sis
[   15.712148] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[   15.712151] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[   15.875648] ata1.00: ATA-7: SAMSUNG MP0402H, UC100-11, max UDMA/100
[   15.875653] ata1.00: 78242976 sectors, multi 16: LBA48 
[   15.875666] ata1.00: limited to UDMA/33 due to 40-wire cable
[   15.883656] ata1.00: configured for UDMA/33
[   16.219407] ata2.00: ATAPI: TSSTcorpCDW/DVD TS-L462C, CH00, max UDMA/33
[   16.366995] Marking TSC unstable due to TSC halts in idle
[   16.370975] Time: acpi_pm clocksource has been installed.
[   16.447161] ata2.00: configured for UDMA/33
[   16.447290] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG MP0402H  UC10 PQ: 0 ANSI: 5
[   16.515533] scsi 1:0:0:0: CD-ROM            TSSTcorp CDW/DVD TS-L462C CH00 PQ: 0 ANSI: 5
[   16.515757] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20
[   16.515899] ohci_hcd 0000:00:03.0: OHCI Host Controller
[   16.516161] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[   16.516181] ohci_hcd 0000:00:03.0: irq 20, io mem 0xdfffd000
[   16.525805] Driver 'sd' needs updating - please use bus_type methods
[   16.525907] sd 0:0:0:0: [sda] 78242976 512-byte hardware sectors (40060 MB)
[   16.525920] sd 0:0:0:0: [sda] Write Protect is off
[   16.525923] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   16.525939] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   16.525985] sd 0:0:0:0: [sda] 78242976 512-byte hardware sectors (40060 MB)
[   16.525994] sd 0:0:0:0: [sda] Write Protect is off
[   16.525997] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   16.526010] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   16.526015]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[   16.573003] usb usb1: configuration #1 chosen from 1 choice
[   16.573032] hub 1-0:1.0: USB hub found
[   16.573040] hub 1-0:1.0: 3 ports detected
[   16.674908] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21
[   16.675066] ohci_hcd 0000:00:03.1: OHCI Host Controller
[   16.675136] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[   16.675157] ohci_hcd 0000:00:03.1: irq 21, io mem 0xdfffe000
[   16.732860] usb usb2: configuration #1 chosen from 1 choice
[   16.732888] hub 2-0:1.0: USB hub found
[   16.732896] hub 2-0:1.0: 3 ports detected
[   16.835188] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 19
[   16.885336] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[dfffb800-dfffbfff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[   16.898747] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 23
[   16.898881] ehci_hcd 0000:00:03.3: EHCI Host Controller
[   16.898951] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 3
[   16.898989] PCI: cache line size of 64 is not supported by device 0000:00:03.3
[   16.899000] ehci_hcd 0000:00:03.3: irq 23, io mem 0xdffff000
[   16.998580] usb 1-2: new low speed USB device using ohci_hcd and address 2
[   17.010564] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   17.010692] usb usb3: configuration #1 chosen from 1 choice
[   17.010726] hub 3-0:1.0: USB hub found
[   17.010736] hub 3-0:1.0: 6 ports detected
[   17.019523]  sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
[   17.089954] sd 0:0:0:0: [sda] Attached SCSI disk
[   17.097111] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   17.097134] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   17.433018] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[   17.433025] Uniform CD-ROM driver Revision: 3.20
[   17.433087] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   17.657194] Attempting manual resume
[   17.657198] swsusp: Resume From Partition 8:6
[   17.657200] PM: Checking swsusp image.
[   17.657527] PM: Resume from disk failed.
[   17.668873] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[   17.670954] SGI XFS Quota Management subsystem
[   17.682133] usb 1-2: new low speed USB device using ohci_hcd and address 3
[   17.700922] XFS mounting filesystem sda7
[   17.812894] Ending clean XFS mount for filesystem: sda7
[   17.885129] usb 1-2: configuration #1 chosen from 1 choice
[   18.169869] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00030d532450d740]
[   33.343857] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   34.055095] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   34.115836] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   34.357396] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
[   34.606956] input: Power Button (FF) as /devices/virtual/input/input3
[   34.634647] ACPI: Power Button (FF) [PWRF]
[   34.634727] input: Lid Switch as /devices/virtual/input/input4
[   34.650697] ACPI: Lid Switch [LID]
[   34.650764] input: Sleep Button (CM) as /devices/virtual/input/input5
[   34.682632] ACPI: Sleep Button (CM) [SLPB]
[   34.682694] input: Power Button (CM) as /devices/virtual/input/input6
[   34.714604] ACPI: Power Button (CM) [PWRB]
[   34.946486] ACPI: AC Adapter [AC0] (on-line)
[   35.243788] ACPI: Battery Slot [BAT0] (battery absent)
[   35.494566] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input7
[   35.526047] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   36.102861] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 18
[   36.425360] intel8x0_measure_ac97_clock: measured 55242 usecs
[   36.425365] intel8x0: clocking to 48000
[   36.475095] usbcore: registered new interface driver hiddev
[   36.479660] input: HID 062a:0000 as /devices/pci0000:00/0000:00:03.0/usb1/1-2/1-2:1.0/input/input8
[   36.517379] input,hidraw0: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:03.0-2
[   36.517400] usbcore: registered new interface driver usbhid
[   36.517404] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   36.831783] NET: Registered protocol family 17
[   37.289681] eth0: Media Link On 100mbps full-duplex 
[   38.682580] fuse init (API version 7.9)
[   38.803337] lp: driver loaded but no devices found
[   39.100380] Adding 1028120k swap on /dev/sda6.  Priority:-1 extents:1 across:1028120k
[   41.556145] NET: Registered protocol family 10
[   41.556378] lo: Disabled Privacy Extensions
[   51.994317] eth0: no IPv6 routers present
[  154.637719] XFS mounting filesystem sda8
[  154.752175] Ending clean XFS mount for filesystem: sda8
[  157.433014] ip_tables: (C) 2000-2006 Netfilter Core Team
[  159.092204] No dock devices found.
[  159.848083] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology MT-28 processors (1 cpu cores) (version 2.20.00)
[  159.848120] powernow-k8:    0 : fid 0x8 (1600 MHz), vid 0xa
[  159.848123] powernow-k8:    1 : fid 0x0 (800 MHz), vid 0x16
[  159.848162] powernow-k8: ph2 null fid transition 0x8
[  166.882772] Clocksource tsc unstable (delta = -249872308 ns)
[  168.183175] tun: Universal TUN/TAP device driver, 1.6
[  168.183179] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[  168.183886] tun0: Disabled Privacy Extensions
[  776.731863] ACPI: EC: missing OBF confirmation, don't expect it any longer.
lijt@lijt-laptop-hasee:~$ 

Re: [问题]为什么少了一些内存

发表于 : 2008-10-27 8:46
xialys
我這裡也遇到這種情況,去機房查看了一下主機的硬件情況,原來是内存卡出問題了,亮紅色警示燈。