分页： 1 / 1
ubuntu 不能启动x
发表于 ： 2008-09-05 13:38
由 shengjiasun
配置了3D桌面后重启。。。死机。。。。然后强行关机。。
现在开机不能进去x
发表于 ： 2008-09-05 19:52
由 dsj
想办法恢复原来的显示备份文件
试试：
sudo cp /etc/X11/xorg.conf.backup /etc/X11/xorg.conf
发表于 ： 2008-09-05 19:56
由 delectate
dsj 写了：想办法恢复原来的显示备份文件
试试：
sudo cp /etc/X11/xorg.conf.backup /etc/X11/xorg.conf
进recover然后重安显卡驱动
3d很爽，但是配置起来很晕
发表于 ： 2008-09-05 19:59
由 dsj
3D可以在图形界面安装，系统－－系统管理－－硬件驱动，可以启动3D
发表于 ： 2008-09-06 21:47
由 shengjiasun
谢谢楼上的帮助。。但是没有用
系统有时候能进去。。。有时候又出现这个画面。。。
该怎么办？？HELP
发表于 ： 2008-09-06 21:50
由 C.MyDogs
楼主电脑是什么显卡？
发表于 ： 2008-09-06 22:15
由 shengjiasun
显卡是集成的。。
发表于 ： 2008-09-06 22:17
由 shengjiasun
显卡是945GM express chipset family
发表于 ： 2008-09-06 22:34
由 C.MyDogs
You can install 915resolution and vbetool the same way you install any software in ubuntu. Either click on System > Administration > Synaptic Package manager, or open a terminal and run sudo aptitude install 915resolution vbetool
To make 915resolution available you may need to enable the universe repository, either through Synaptic Package Manager > Settings > Repositories or by editing /etc/apt/sources.list. If you had to enable the universe repository you'll need to update the list of packages by clicking reload in Synaptic or running sudo aptitude update
915resolution should automatically start at boot. You can start it now by running sudo /etc/init.d/915resolution start then restarting Xorg by logging out and pressing Ctrl+Alt+Backspace. This should start you up in the new resolution as long as it is listed in your /etc/X11/xorg.conf file. If it doesn't work, try rebooting, if still nothing then post the output of sudo 915resolution -l and the contents of /etc/X11/xorg.conf
EDIT: I now see the HOWTO you are refering too. Frankly, this is news to me (and possibly good news!) I'll test it out tomorrow night....
找了这些，楼主E文应该比我好，看看吧。
意思：
是可以安装915的驱动，恢复后再安装新的。