当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 4 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : [问题]Ubuntu 5.10下的DVD刻录速度非常慢,不知道是怎么回事?
帖子发表于 : 2006-05-14 11:51 

注册: 2006-02-01 19:59
帖子: 9
送出感谢: 0 次
接收感谢: 0 次
手头有一个三星DVD刻录机,在Ubuntu下刻录一张DVD要1小时,我用gnomebaker和nerolinux各刻录了一张都是一样,但是在Windows下只用了十几分钟,不知道怎样才能提速?谢谢!


页首
 用户资料  
 
2 楼 
 文章标题 :
帖子发表于 : 2006-05-14 11:53 
头像

注册: 2005-06-19 14:22
帖子: 570
地址: 上海
送出感谢: 0 次
接收感谢: 1
打开DMA功能没有?


_________________
| blog | 豆瓣 | 南方linux联盟论坛 |
图片


页首
 用户资料  
 
3 楼 
 文章标题 :
帖子发表于 : 2006-05-15 20:47 

注册: 2006-05-08 17:28
帖子: 1
送出感谢: 0 次
接收感谢: 0 次
如何提升 CD/DVD-ROM 读取的速度?

例如 假设 /dev/cdrom 是目前 CD/DVD-ROM 所在的位置
*

sudo hdparm -d1 /dev/cdrom
sudo cp /etc/hdparm.conf /etc/hdparm.conf_backup
sudo gedit /etc/hdparm.conf

*

将下列几行新增到文件的最后面

/dev/cdrom {
dma = on
}

*


页首
 用户资料  
 
4 楼 
 文章标题 :
帖子发表于 : 2006-05-15 22:28 

注册: 2006-02-01 19:59
帖子: 9
送出感谢: 0 次
接收感谢: 0 次
谢谢,回帖!
我看了这个文件,我发现cdrom的dma是on的,不知道怎么回事,麻烦给看一下我的hdparm谢谢!

代码:
## This is the default configuration for hdparm for Debian.  It is a
## rather simple script, so please follow the following guidelines :)
## Any line that begins with a comment is ignored - add as many as you
## like.  Note that an in-line comment is not supported.  If a line
## consists of whitespace only (tabs, spaces, carriage return), it will be
## ignored, so you can space control fields as you like.  ANYTHING ELSE
## IS PARSED!!  This means that lines with stray characters or lines that
## use non # comment characters will be interpreted by the initscript. 
## This has probably minor, but potentially serious, side effects for your
## hard drives, so please follow the guidelines.  Patches to improve
## flexibilty welcome.  Please read /usr/share/doc/hdparm/README.Debian for
## notes about known issues, especially if you have an MD array.
##
## Note that if the init script causes boot problems, you can pass 'nohdparm'
## on the kernel command line, and the script will not be run.
##
## Uncommenting the options below will cause them to be added to the DEFAULT
## string which is prepended to options listed in the blocks below.
##
## If an option is listed twice, the second instance replaces the first.
##
## /sbin/hdparm is not run unless a block of the form:
##      DEV {
##         option
##         option
##         ...
##      }
## exists.  This blocks will cause /sbin/hdparm OPTIONS DEV to be run.
## Where OPTIONS is the concatenation of all options previously defined
## outside of a block and all options defined with in the block.

# -q be quiet
quiet
# -a sector count for filesystem read-ahead
#read_ahead_sect = 12
# -A disable/enable the IDE drive's read-lookahead feature
#lookahead = on
# -b bus state
#bus = on
# -B apm setting
#apm = 255
# -c enable (E)IDE 32-bit I/O support - can be any of 0,1,3
#io32_support = 1
# -d disable/enable the "using_dma" flag for this drive
#dma = off
# -D enable/disable the on-drive defect management
#defect_mana = off
# -E cdrom speed
#cd_speed = 16
# -k disable/enable the "keep_settings_over_reset" flag for this drive
#keep_settings_over_reset = off
# -K disable/enable the drive's "keep_features_over_reset" flag
#keep_features_over_reset = on
# -m sector count for multiple sector I/O
#mult_sect_io = 32
# -P maximum sector count for the drive's internal prefetch mechanism
#prefetch_sect = 12
# -r read-only flag for device
#read_only = off
# -S standby (spindown) timeout for the drive
#spindown_time = 24
# -u interrupt-unmask flag for the drive
#interrupt_unmask = on
# -W Disable/enable the IDE drive's write-caching feature
#write_cache = off
# -X IDE transfer mode for newer (E)IDE/ATA2 drives
#transfer_mode = 34
# -y force to immediately enter the standby mode
#standby
# -Y force to immediately enter the sleep mode
#sleep
# -Z Disable the power-saving function of certain Seagate drives
#disable_seagate
# -M Set the acoustic management properties of a drive
#acoustic_management
# -p Set the chipset PIO mode
# chipset_pio_mode

# Root file systems.  Please see README.Debian for details
# ROOTFS = /dev/hda

## New note - you can use straight hdparm commands in this config file
## as well - the set up is ugly, but it keeps backwards compatibility
## Additionally, it should be noted that any blocks that begin with
## the keyword 'command_line' are not run until after the root filesystem
## is mounted.  This is done to avoid running blocks twice.  If you need
## to run hdparm to set parameters for your root disk, please use the
## standard format.

#Samples follow:
#First three are good for devfs systems, fourth one for systems that do
#not use devfs.  The fifth example uses straight hdparm command line
#syntax.  Any of the blocks that use command line syntax must begin with
#the keyword 'command_line', and no attempt is made to validate syntax. 
#It is provided for those more comfortable with hdparm syntax.

#/dev/discs/disc0/disc {
#   mult_sect_io = 16
#   write_cache = off
#   spindown_time = 240
#}

#/dev/discs/disc1/disc {
#   mult_sect_io = 32
#   spindown_time = 36
#   write_cache = off
#}

#/dev/cdroms/cdrom0 {
#   dma = on         
#   interrupt_unmask = on
#   io32_support = 0
#}

#/dev/hda {
#   mult_sect_io = 16
#   write_cache = off
#   dma = on
#}

#command_line {
#       hdparm -q -m16 -q -W0 -q -d1 /dev/hda
#}


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 4 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 4 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译