请问正常的fgl_glxgears的显示是怎么样的?

为当前最终发行版之前的所有版本提供支持
回复
头像
ellickif
帖子: 58
注册时间: 2006-05-02 2:11
送出感谢: 0
接收感谢: 0
联系:

请问正常的fgl_glxgears的显示是怎么样的?

#1

帖子 ellickif » 2006-06-22 1:10

我的显卡(Mobility 9200)装完了fglrx驱动8.25.18,fglrxinfo显示正常,但是运行fgl_glxgears只显示一个单纯的转动的立方体,每个面上都是蓝色的。请问这是不是不正常啊?(我同学的ATi9550运行fgl_glxgears的每个面上都有齿轮在转)

请问有解决的办法吗?THX
zxx007
帖子: 217
注册时间: 2006-04-29 15:43
送出感谢: 0
接收感谢: 0
联系:

#2

帖子 zxx007 » 2006-06-22 1:33

旧显卡用旧版本.
种草得草
帖子: 340
注册时间: 2005-12-31 12:17
送出感谢: 0
接收感谢: 0

#3

帖子 种草得草 » 2006-06-22 7:29

直接用ati就支持3D加速了
没必要用fglrx
chenyu
帖子: 80
注册时间: 2006-02-27 18:06
来自: FZU
送出感谢: 0
接收感谢: 0

#4

帖子 chenyu » 2006-06-22 22:25

每个面上都有齿轮在转是正常的,我也是9550,很正常

你检查xorg.conf看看,我发现按照wiki上的方法,安装后生成的xorg.conf不太正常,很累赘。

代码: 全选

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
        Identifier     "Default Layout"
        Screen      0  "Default Screen" 0 0
        InputDevice    "Generic Keyboard"
        InputDevice    "Configured Mouse"
        InputDevice    "stylus" "SendCoreEvents"
        InputDevice    "cursor" "SendCoreEvents"
        InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"
        FontPath     "/usr/share/X11/fonts/misc"
        FontPath     "/usr/share/X11/fonts/cyrillic"
        FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
        FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
        FontPath     "/usr/share/X11/fonts/Type1"
        FontPath     "/usr/share/X11/fonts/100dpi"
        FontPath     "/usr/share/X11/fonts/75dpi"
        # path to defoma fonts
        FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
        Load  "i2c"
        Load  "bitmap"
        Load  "ddc"
        Load  "dri"
        Load  "extmod"
        Load  "freetype"
        Load  "glx"
        Load  "int10"
        Load  "type1"
        Load  "vbe"
EndSection

Section "InputDevice"
        Identifier  "Generic Keyboard"
        Driver      "kbd"
        Option      "CoreKeyboard"
        Option      "XkbRules" "xorg"
        Option      "XkbModel" "pc104"
        Option      "XkbLayout" "us"
EndSection

Section "InputDevice"
        Identifier  "Configured Mouse"
        Driver      "mouse"
        Option      "CorePointer"
        Option      "Device" "/dev/input/mice"
        Option      "Protocol" "ExplorerPS/2"
        Option      "ZAxisMapping" "4 5"
        Option      "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
        Identifier   "IBM P50"
        HorizSync    30.0 - 69.0
        VertRefresh  50.0 - 120.0
        Option      "VendorName" "IBM"
        Option      "ModelName" "P50"
        Option      "DPMS" "true"
EndSection

Section "Device"
        Identifier  "ATI Technologies, Inc. RV350 AP [Radeon 9600]"
        Driver      "fglrx"
        Option      "VideoOverlay" "on"
        Option      "OpenGLOverlay" "off"
        BusID       "PCI:1:0:0"
EndSection

Section "Screen"
        Identifier "Default Screen"
        Device     "ATI Technologies, Inc. RV350 AP [Radeon 9600]"
        Monitor    "IBM P50"
        DefaultDepth     24
        SubSection "Display"
                Depth     1
                Modes    "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth     4
                Modes    "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth     8
                Modes    "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth     15
                Modes    "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth     16
                Modes    "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth     24
                Viewport   0 0
                Modes    "1024x768" "800x600" "640x480"
        EndSubSection
EndSection

Section "DRI"
        Mode         0666
EndSection
回复

回到 “老旧版本支持”