当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 34 篇帖子 ]  前往页数 1, 2, 3  下一页
作者 内容
1 楼 
 文章标题 : 新安装了ubuntu 9.10,启动速度超级慢!
帖子发表于 : 2010-02-24 13:29 

注册: 2010-02-24 13:23
帖子: 16
送出感谢: 0 次
接收感谢: 0 次
各位朋友,我是新手,从ubuntu官网上下载了9.10 iso文件,刻盘,安装到我的机器上,没想到启动慢得一塌糊涂。我的硬件配置应该还算过得去,intel core 2 duo 2.93G, 2G内存。运行xp速度很快。但ubuntu启动每次需要3~5分钟。

我google了几篇文章,照着做了可惜没有效果。下面是我尝试的过程。

第一次:看到有文章说是磁盘分区的问题:
问题就出在 FSC(KFile System Check) 默认检查所有磁盘分区 解决方法:
  1.sudo gedit /etc/fstab
  2. 找到如下的文字 : # /dev/sda1 UUID=6E50BE5450BE22AF /media/sda1 ntfs defaults,umask=007,gid=46 0 1 -->
  3. 把最后的1改成0 结果如下 # /dev/sda1 UUID=6E50BE5450BE22AF /media/sda1 ntfs defaults,umask=007,gid=46 0 0
  4. 也就是找出所有的中间是 NTFS 或者Vfat或者FAT32之类Windows的磁盘系统, 把最后的数字都改成0。
  5. 存盘重启。



想一下也有可能,因为我的系统正是XP和ubuntu双系统,硬盘500G,有5个ntfs分区,分别是100/50/50/110/80。安装 ubuntu是从光盘引导后安装的,使用了系统默认设置。但是具体安装到哪个分区去了,我也不清楚,反正windows xp下是看不到。我按上述方法操作,可惜在我的机器中的/etc/fstab文件中没有看到任何ntfs字符串。所以没有修改成功。不知道是不是因为前面的文章介绍的问题是在ubuntu 7.10下面的,而我的系统是9.10.

后来我又在网上看到下面的方法:
Please try the following:
sudo add-apt-repository ppa:ubuntu-boot/ppa
sudo apt-get update
sudo apt-get dist-upgrade
This should install an updated kernel package, and replace sreadahead with ureadahead.The first reboot will reprofile your system, the second reboot should be substantially faster.


我照着操作了一遍,结果耗费了1个多小时(我的带宽只有1M),系统重新启动后发现从按下reset到出现登录界面依然要花费3分钟以上。

我实在不明白问题出在哪里。请朋友们给点建议,谢谢!


页首
 用户资料  
 
2 楼 
 文章标题 : Re: 新安装了ubuntu 9.10,启动速度超级慢!
帖子发表于 : 2010-02-24 13:37 
头像

注册: 2008-04-27 12:15
帖子: 1026
送出感谢: 0 次
接收感谢: 0 次
“因为我的系统正是XP和ubuntu双系统,硬盘500G,有5个ntfs分区,分别是100/50/50/110/80”
真可怕,把XP装进至少50G的分区= =|||

帮不上忙


_________________
oneleaf 的教导记心间:《学习linux几点忠告》


页首
 用户资料  
 
3 楼 
 文章标题 : Re: 新安装了ubuntu 9.10,启动速度超级慢!
帖子发表于 : 2010-02-24 15:20 

注册: 2010-02-24 13:23
帖子: 16
送出感谢: 0 次
接收感谢: 0 次
回wheatOr朋友,我的xp装在第一个ntfs分区,100G,之所以大,是因为有很多大东东默认都要往C上安装。难道是分区不当引起的问题吗?


页首
 用户资料  
 
4 楼 
 文章标题 : Re: 新安装了ubuntu 9.10,启动速度超级慢!
帖子发表于 : 2010-02-24 15:25 

注册: 2008-06-25 11:28
帖子: 196
送出感谢: 0 次
接收感谢: 0 次
给ubuntu是怎样分区的?文件系统用的是什么?
如果要查看分区,很简单,在终端中使用“df"命令就可以查看“/"挂载点是哪个分区。
也可以查看/etc/fstab文件。

另外,启动时,是否有显示进行fsck?

可以将dmesg传上来,估计有大侠可以帮助你诊断一下。


_________________
山不转,水转,山不移,我移。


页首
 用户资料  
 
5 楼 
 文章标题 : Re: 新安装了ubuntu 9.10,启动速度超级慢!
帖子发表于 : 2010-02-24 20:41 
头像

注册: 2009-01-24 23:07
帖子: 1230
送出感谢: 0 次
接收感谢: 0 次
vviper 写道:
系统重新启动后发现从按下reset到出现登录界面依然要花费3分钟以上。

按reset干什么?
不会每次都非法关机,每次都检测磁盘吧……


_________________
学生仅此而已……


页首
 用户资料  
 
6 楼 
 文章标题 : Re: 新安装了ubuntu 9.10,启动速度超级慢!
帖子发表于 : 2010-02-24 21:00 

注册: 2010-02-24 13:23
帖子: 16
送出感谢: 0 次
接收感谢: 0 次
@mayi:
我 用 df命令查看 结果如 下 :
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda9 81792340 3031716 74605816 4% /
udev 1030280 284 1029996 1% /dev
none 1030280 1368 1028912 1% /dev/shm
none 1030280 92 1030188 1% /var/run
none 1030280 0 1030280 0% /var/lock
none 1030280 0 1030280 0% /lib/init/rw

文件系統好像 是 ext4.

起 动 时系统是否 fsck了我 不知道
我 的 /etc/fstab内 容 为 :
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda9 during installation
UUID=b27074c9-9603-47fc-aab4-68ab2398c07e / ext4 errors=remount-ro 0 1
# swap was on /dev/sda10 during installation
UUID=2376c586-b1d6-4e53-b966-b4591f80120f none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0

dmesg文件非常大!


页首
 用户资料  
 
7 楼 
 文章标题 : Re: 新安装了ubuntu 9.10,启动速度超级慢!
帖子发表于 : 2010-02-24 21:02 

注册: 2010-02-24 13:23
帖子: 16
送出感谢: 0 次
接收感谢: 0 次
下面是dmesg的内容,总计有789行:

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-19-generic (buildd@palmer) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #56-Ubuntu SMP Thu Jan 28 01:26:53 UTC 2010 (Ubuntu 2.6.31-19.56-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
[ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee2000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fee2000 - 000000007fef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x7fee0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CDFFF write-protect
[ 0.000000] CE000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007fee0000 (usable)
[ 0.000000] modified: 000000007fee0000 - 000000007fee2000 (ACPI NVS)
[ 0.000000] modified: 000000007fee2000 - 000000007fef0000 (ACPI data)
[ 0.000000] modified: 000000007fef0000 - 000000007ff00000 (reserved)
[ 0.000000] modified: 00000000f4000000 - 00000000f8000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 378a4000 - 37fef2a8
[ 0.000000] Allocated new RAMDISK: 008ad000 - 00ff82a8
[ 0.000000] Move RAMDISK from 00000000378a4000 - 0000000037fef2a7 to 008ad000 - 00ff82a7
[ 0.000000] ACPI: RSDP 000f6f60 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 7fee2040 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 7fee20c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 7fee2180 04B3E (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 7fee0000 00040
[ 0.000000] ACPI: HPET 7fee6e00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 7fee6e80 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: EUDS 7fee6ec0 00000 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: TAMG 7fee73e0 0670A (v01 GBT GBT B0 5455312E BG 00020101)
[ 0.000000] ACPI: APIC 7fee6d00 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 7feee150 003AB (v01 PmRef CpuPm 00003000 INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1158MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [00008a9000 - 00008ac0f6] BRK ==> [00008a9000 - 00008ac0f6]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00008ad000 - 0000ff82a8] NEW RAMDISK ==> [00008ad000 - 0000ff82a8]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00f5560] f5560
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007fee0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fee0
[ 0.000000] On node 0 totalpages: 523899
[ 0.000000] free_area_init_node: node 0, pgdat c0784960, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2318 pages used for memmap
[ 0.000000] HighMem zone: 294356 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:74100000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c200a000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519805
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-19-generic root=UUID=b27074c9-9603-47fc-aab4-68ab2398c07e ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 10480000 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007fee0)
[ 0.000000] Memory: 2051696k/2096000k available (4567k kernel code, 43040k reserved, 2141k data, 540k init, 1186696k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)
[ 0.000000] .data : 0xc0575c48 - 0xc078d408 (2141 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0575c48 (4567 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2933.121 MHz processor.
[ 0.001543] Console: colour VGA+ 80x25
[ 0.001546] console [tty0] enabled
[ 0.001666] hpet clockevent registered
[ 0.001669] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.001674] Calibrating delay loop (skipped), value calculated using timer frequency.. 5866.24 BogoMIPS (lpj=11732484)
[ 0.001689] Security Framework initialized
[ 0.001705] AppArmor: AppArmor initialized
[ 0.001711] Mount-cache hash table entries: 512
[ 0.001815] Initializing cgroup subsys ns
[ 0.001819] Initializing cgroup subsys cpuacct
[ 0.001823] Initializing cgroup subsys memory
[ 0.001828] Initializing cgroup subsys freezer
[ 0.001830] Initializing cgroup subsys net_cls
[ 0.001842] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.001844] CPU: L2 cache: 3072K
[ 0.001846] CPU: Physical Processor ID: 0
[ 0.001848] CPU: Processor Core ID: 0
[ 0.001851] mce: CPU supports 6 MCE banks
[ 0.001858] CPU0: Thermal monitoring enabled (TM2)
[ 0.001861] using mwait in idle threads.
[ 0.001865] Performance Counters: Core2 events, Intel PMU driver.
[ 0.001872] ... version: 2
[ 0.001874] ... bit width: 40
[ 0.001875] ... generic counters: 2
[ 0.001877] ... value mask: 000000ffffffffff
[ 0.001878] ... max period: 000000007fffffff
[ 0.001880] ... fixed-purpose counters: 3
[ 0.001881] ... counter mask: 0000000700000003
[ 0.001886] Checking 'hlt' instruction... OK.
[ 0.018449] ACPI: Core revision 20090521
[ 0.025262] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064947] CPU0: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz stepping 0a
[ 0.068001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5866.83 BogoMIPS (lpj=11733667)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 3072K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.153562] CPU1: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz stepping 0a
[ 0.153574] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.156020] Brought up 2 CPUs
[ 0.156023] Total of 2 processors activated (11733.07 BogoMIPS).
[ 0.156066] CPU0 attaching sched-domain:
[ 0.156068] domain 0: span 0-1 level MC
[ 0.156071] groups: 0 1
[ 0.156075] CPU1 attaching sched-domain:
[ 0.156077] domain 0: span 0-1 level MC
[ 0.156079] groups: 1 0
[ 0.156145] Booting paravirtualized kernel on bare hardware
[ 0.156186] regulator: core version 0.5
[ 0.156186] Time: 20:31:23 Date: 02/24/10
[ 0.156186] NET: Registered protocol family 16
[ 0.156186] EISA bus registered
[ 0.156186] ACPI: bus type pci registered
[ 0.156239] PCI: MCFG configuration 0: base f4000000 segment 0 buses 0 - 63
[ 0.156242] PCI: MCFG area at f4000000 reserved in E820
[ 0.156244] PCI: Using MMCONFIG for extended config space
[ 0.156245] PCI: Using configuration type 1 for base access
[ 0.157111] bio: create slab <bio-0> at 0
[ 0.157111] ACPI: EC: Look up EC in DSDT
[ 0.164198] ACPI: Interpreter enabled
[ 0.164207] ACPI: (supports S0 S3 S4 S5)
[ 0.164225] ACPI: Using IOAPIC for interrupt routing
[ 0.168284] ACPI: No dock devices found.
[ 0.168362] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.168450] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.168453] pci 0000:00:01.0: PME# disabled
[ 0.168519] pci 0000:00:1a.0: reg 20 io port: [0xff00-0xff1f]
[ 0.168583] pci 0000:00:1a.1: reg 20 io port: [0xfe00-0xfe1f]
[ 0.168647] pci 0000:00:1a.2: reg 20 io port: [0xfd00-0xfd1f]
[ 0.168702] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff]
[ 0.168777] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff8000-0xfdffbfff]
[ 0.168815] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.168819] pci 0000:00:1b.0: PME# disabled
[ 0.168872] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.168876] pci 0000:00:1c.0: PME# disabled
[ 0.168934] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.168937] pci 0000:00:1c.4: PME# disabled
[ 0.168992] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.168995] pci 0000:00:1c.5: PME# disabled
[ 0.169046] pci 0000:00:1d.0: reg 20 io port: [0xfc00-0xfc1f]
[ 0.169110] pci 0000:00:1d.1: reg 20 io port: [0xfb00-0xfb1f]
[ 0.169175] pci 0000:00:1d.2: reg 20 io port: [0xfa00-0xfa1f]
[ 0.169231] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdffe000-0xfdffe3ff]
[ 0.169420] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.169426] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.169432] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.169437] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.169443] pci 0000:00:1f.2: reg 20 io port: [0xf900-0xf90f]
[ 0.169448] pci 0000:00:1f.2: reg 24 io port: [0xf800-0xf80f]
[ 0.169491] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfdffd000-0xfdffd0ff]
[ 0.169503] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
[ 0.169543] pci 0000:00:1f.5: reg 10 io port: [0xf600-0xf607]
[ 0.169549] pci 0000:00:1f.5: reg 14 io port: [0xf500-0xf503]
[ 0.169554] pci 0000:00:1f.5: reg 18 io port: [0xf400-0xf407]
[ 0.169559] pci 0000:00:1f.5: reg 1c io port: [0xf300-0xf303]
[ 0.169565] pci 0000:00:1f.5: reg 20 io port: [0xf200-0xf20f]
[ 0.169570] pci 0000:00:1f.5: reg 24 io port: [0xf100-0xf10f]
[ 0.169625] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[ 0.169633] pci 0000:01:00.0: reg 14 64bit mmio: [0xc0000000-0xdfffffff]
[ 0.169642] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
[ 0.169647] pci 0000:01:00.0: reg 24 io port: [0xef00-0xef7f]
[ 0.169653] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x07ffff]
[ 0.169714] pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
[ 0.169716] pci 0000:00:01.0: bridge 32bit mmio: [0xf8000000-0xfbffffff]
[ 0.169721] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xdfffffff]
[ 0.169814] pci 0000:03:00.0: reg 10 io port: [0xdf00-0xdf07]
[ 0.169823] pci 0000:03:00.0: reg 14 io port: [0xde00-0xde03]
[ 0.169832] pci 0000:03:00.0: reg 18 io port: [0xdd00-0xdd07]
[ 0.169841] pci 0000:03:00.0: reg 1c io port: [0xdc00-0xdc03]
[ 0.169849] pci 0000:03:00.0: reg 20 io port: [0xdb00-0xdb0f]
[ 0.169938] pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff]
[ 0.169942] pci 0000:00:1c.4: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
[ 0.169989] pci 0000:04:00.0: reg 10 io port: [0xce00-0xceff]
[ 0.170008] pci 0000:04:00.0: reg 18 64bit mmio: [0xfdeff000-0xfdefffff]
[ 0.170022] pci 0000:04:00.0: reg 20 64bit mmio: [0xfdee0000-0xfdeeffff]
[ 0.170030] pci 0000:04:00.0: reg 30 32bit mmio: [0x000000-0x00ffff]
[ 0.170068] pci 0000:04:00.0: supports D1 D2
[ 0.170069] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.170074] pci 0000:04:00.0: PME# disabled
[ 0.170128] pci 0000:00:1c.5: bridge io port: [0xc000-0xcfff]
[ 0.170132] pci 0000:00:1c.5: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
[ 0.170137] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xfde00000-0xfdefffff]
[ 0.170182] pci 0000:00:1e.0: transparent bridge
[ 0.170208] pci_bus 0000:00: on NUMA node 0
[ 0.170211] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.170380] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.170439] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.170500] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[ 0.170550] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.183615] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.183701] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 0.183785] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.183869] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.183953] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.184042] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
[ 0.184126] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.184209] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.184355] SCSI subsystem initialized
[ 0.184371] libata version 3.00 loaded.
[ 0.184371] usbcore: registered new interface driver usbfs
[ 0.184371] usbcore: registered new interface driver hub
[ 0.184371] usbcore: registered new device driver usb
[ 0.184371] ACPI: WMI: Mapper loaded
[ 0.184371] PCI: Using ACPI for IRQ routing
[ 0.196008] Bluetooth: Core ver 2.15
[ 0.196024] NET: Registered protocol family 31
[ 0.196024] Bluetooth: HCI device and connection manager initialized
[ 0.196024] Bluetooth: HCI socket layer initialized
[ 0.196024] NetLabel: Initializing
[ 0.196024] NetLabel: domain hash size = 128
[ 0.196024] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.196037] NetLabel: unlabeled traffic allowed by default
[ 0.196069] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.196076] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.212010] pnp: PnP ACPI init
[ 0.212020] ACPI: bus type pnp registered
[ 0.214276] pnp: PnP ACPI: found 14 devices
[ 0.214278] ACPI: ACPI bus type pnp unregistered
[ 0.214282] PnPBIOS: Disabled by ACPI PNP
[ 0.214290] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.214292] system 00:01: ioport range 0x290-0x29f has been reserved
[ 0.214295] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.214297] system 00:01: ioport range 0x290-0x294 has been reserved
[ 0.214300] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.214307] system 00:0a: ioport range 0x400-0x4cf has been reserved
[ 0.214309] system 00:0a: ioport range 0x4d2-0x4ff has been reserved
[ 0.214314] system 00:0b: iomem range 0xf4000000-0xf7ffffff has been reserved
[ 0.214319] system 00:0c: iomem range 0xce400-0xcffff has been reserved
[ 0.214322] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.214324] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.214327] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[ 0.214330] system 00:0c: iomem range 0x7fee0000-0x7fefffff could not be reserved
[ 0.214332] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.214335] system 00:0c: iomem range 0x100000-0x7fedffff could not be reserved
[ 0.214338] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.214341] system 00:0c: iomem range 0xfed10000-0xfed1dfff has been reserved
[ 0.214343] system 00:0c: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.214346] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.214348] system 00:0c: iomem range 0xffb00000-0xffb7ffff has been reserved
[ 0.214351] system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.214353] system 00:0c: iomem range 0xe0000-0xeffff has been reserved
[ 0.248972] AppArmor: AppArmor Filesystem Enabled
[ 0.249015] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.249018] pci 0000:00:01.0: IO window: 0xe000-0xefff
[ 0.249022] pci 0000:00:01.0: MEM window: 0xf8000000-0xfbffffff
[ 0.249025] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000dfffffff
[ 0.249029] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.249031] pci 0000:00:1c.0: IO window: disabled
[ 0.249035] pci 0000:00:1c.0: MEM window: disabled
[ 0.249038] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.249042] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[ 0.249044] pci 0000:00:1c.4: IO window: 0xd000-0xdfff
[ 0.249049] pci 0000:00:1c.4: MEM window: 0xfdd00000-0xfddfffff
[ 0.249053] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.249057] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04
[ 0.249060] pci 0000:00:1c.5: IO window: 0xc000-0xcfff
[ 0.249064] pci 0000:00:1c.5: MEM window: 0xfdc00000-0xfdcfffff
[ 0.249068] pci 0000:00:1c.5: PREFETCH window: 0x000000fde00000-0x000000fdefffff
[ 0.249073] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.249075] pci 0000:00:1e.0: IO window: disabled
[ 0.249079] pci 0000:00:1e.0: MEM window: disabled
[ 0.249082] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.249090] alloc irq_desc for 16 on node -1
[ 0.249092] alloc kstat_irqs on node -1
[ 0.249096] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.249100] pci 0000:00:01.0: setting latency timer to 64
[ 0.249106] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.249110] pci 0000:00:1c.0: setting latency timer to 64
[ 0.249117] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.249120] pci 0000:00:1c.4: setting latency timer to 64
[ 0.249126] alloc irq_desc for 17 on node -1
[ 0.249128] alloc kstat_irqs on node -1
[ 0.249131] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.249134] pci 0000:00:1c.5: setting latency timer to 64
[ 0.249141] pci 0000:00:1e.0: setting latency timer to 64
[ 0.249144] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.249147] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.249149] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
[ 0.249151] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbffffff]
[ 0.249153] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xdfffffff]
[ 0.249156] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 0.249158] pci_bus 0000:03: resource 1 mem: [0xfdd00000-0xfddfffff]
[ 0.249161] pci_bus 0000:04: resource 0 io: [0xc000-0xcfff]
[ 0.249163] pci_bus 0000:04: resource 1 mem: [0xfdc00000-0xfdcfffff]
[ 0.249165] pci_bus 0000:04: resource 2 pref mem [0xfde00000-0xfdefffff]
[ 0.249167] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.249169] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
[ 0.249195] NET: Registered protocol family 2
[ 0.249272] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.249516] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.249825] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.249989] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.249991] TCP reno registered
[ 0.250050] NET: Registered protocol family 1
[ 0.250094] Trying to unpack rootfs image as initramfs...
[ 0.414104] Freeing initrd memory: 7468k freed
[ 0.417009] cpufreq-nforce2: No nForce2 chipset.
[ 0.417037] Scanning for low memory corruption every 60 seconds
[ 0.417124] audit: initializing netlink socket (disabled)
[ 0.417138] type=2000 audit(1267043482.416:1): initialized
[ 0.424767] highmem bounce pool size: 64 pages
[ 0.424771] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.426026] VFS: Disk quotas dquot_6.5.2
[ 0.426077] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.426543] fuse init (API version 7.12)
[ 0.426614] msgmni has been set to 1705
[ 0.426789] alg: No test for stdrng (krng)
[ 0.426801] io scheduler noop registered
[ 0.426803] io scheduler anticipatory registered
[ 0.426804] io scheduler deadline registered
[ 0.426839] io scheduler cfq registered (default)
[ 0.456060] pci 0000:01:00.0: Boot video device
[ 0.456189] alloc irq_desc for 24 on node -1
[ 0.456191] alloc kstat_irqs on node -1
[ 0.456201] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.456209] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.456306] alloc irq_desc for 25 on node -1
[ 0.456308] alloc kstat_irqs on node -1
[ 0.456314] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.456321] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.456420] alloc irq_desc for 26 on node -1
[ 0.456421] alloc kstat_irqs on node -1
[ 0.456428] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X
[ 0.456435] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 0.456534] alloc irq_desc for 27 on node -1
[ 0.456536] alloc kstat_irqs on node -1
[ 0.456542] pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X
[ 0.456549] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 0.456624] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.456705] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.456825] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.456829] ACPI: Power Button [PWRF]
[ 0.456871] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.456873] ACPI: Power Button [PWRB]
[ 0.459294] ACPI Warning: Incorrect checksum in table [TAMG] - 85, should be 84 20090521 tbutils-246
[ 0.459301] ACPI: SSDT 7feedb30 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.459456] Marking TSC unstable due to TSC halts in idle
[ 0.459478] Switched to high resolution mode on CPU 0
[ 0.459485] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 0.459505] processor LNXCPU:00: registered as cooling_device0
[ 0.459508] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.459674] ACPI: SSDT 7feedff0 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.459848] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 0.459868] processor LNXCPU:01: registered as cooling_device1
[ 0.459871] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.461477] isapnp: Scanning for PnP cards...
[ 0.461621] Switched to high resolution mode on CPU 1
[ 0.814358] isapnp: No Plug & Play device found
[ 0.815308] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.815398] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.815699] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.816624] brd: module loaded
[ 0.817001] loop: module loaded
[ 0.817056] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.817143] ata_piix 0000:00:1f.2: version 2.13
[ 0.817155] alloc irq_desc for 19 on node -1
[ 0.817156] alloc kstat_irqs on node -1
[ 0.817161] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.817165] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.817201] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.817255] scsi0 : ata_piix
[ 0.817319] scsi1 : ata_piix
[ 0.817815] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 0.817819] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 0.817837] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.817843] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.817878] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.817917] scsi2 : ata_piix
[ 0.817965] scsi3 : ata_piix
[ 0.818386] ata3: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf200 irq 19
[ 0.818389] ata4: SATA max UDMA/133 cmd 0xf400 ctl 0xf300 bmdma 0xf208 irq 19
[ 0.818704] pata_jmicron 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.818726] pata_jmicron 0000:03:00.0: setting latency timer to 64
[ 0.818774] scsi4 : pata_jmicron
[ 0.818820] scsi5 : pata_jmicron
[ 0.819338] ata5: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16
[ 0.819340] ata6: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16
[ 0.819805] Fixed MDIO Bus: probed
[ 0.819833] PPP generic driver version 2.4.2
[ 0.819900] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.819914] alloc irq_desc for 18 on node -1
[ 0.819916] alloc kstat_irqs on node -1
[ 0.819919] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.819928] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.819931] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.819967] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.823879] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.823890] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000
[ 0.836014] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.836091] usb usb1: configuration #1 chosen from 1 choice
[ 0.836127] hub 1-0:1.0: USB hub found
[ 0.836135] hub 1-0:1.0: 6 ports detected
[ 0.836201] alloc irq_desc for 23 on node -1
[ 0.836202] alloc kstat_irqs on node -1
[ 0.836206] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.836213] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.836216] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.836241] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.840144] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.840155] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000
[ 0.852013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.852081] usb usb2: configuration #1 chosen from 1 choice
[ 0.852115] hub 2-0:1.0: USB hub found
[ 0.852122] hub 2-0:1.0: 6 ports detected
[ 0.852187] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.852207] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.852223] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.852228] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.852231] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.852260] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.852280] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
[ 0.852343] usb usb3: configuration #1 chosen from 1 choice
[ 0.852365] hub 3-0:1.0: USB hub found
[ 0.852370] hub 3-0:1.0: 2 ports detected
[ 0.852407] alloc irq_desc for 21 on node -1
[ 0.852409] alloc kstat_irqs on node -1
[ 0.852413] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.852418] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.852420] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.852445] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.852470] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
[ 0.852540] usb usb4: configuration #1 chosen from 1 choice
[ 0.852562] hub 4-0:1.0: USB hub found
[ 0.852567] hub 4-0:1.0: 2 ports detected
[ 0.852603] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.852610] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.852612] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.852636] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.852656] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
[ 0.852719] usb usb5: configuration #1 chosen from 1 choice
[ 0.852741] hub 5-0:1.0: USB hub found
[ 0.852746] hub 5-0:1.0: 2 ports detected
[ 0.852783] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.852788] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.852791] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.852817] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.852836] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
[ 0.852900] usb usb6: configuration #1 chosen from 1 choice
[ 0.852922] hub 6-0:1.0: USB hub found
[ 0.852927] hub 6-0:1.0: 2 ports detected
[ 0.852966] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.852971] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.852974] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.852998] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.853018] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
[ 0.853078] usb usb7: configuration #1 chosen from 1 choice
[ 0.853100] hub 7-0:1.0: USB hub found
[ 0.853105] hub 7-0:1.0: 2 ports detected
[ 0.853147] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.853152] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.853155] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.853179] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.853199] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
[ 0.853261] usb usb8: configuration #1 chosen from 1 choice
[ 0.853283] hub 8-0:1.0: USB hub found
[ 0.853288] hub 8-0:1.0: 2 ports detected
[ 0.853368] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.853370] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.853462] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.853504] mice: PS/2 mouse device common for all mice
[ 0.853592] rtc_cmos 00:04: RTC can wake from S4
[ 0.853617] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.853638] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.853721] device-mapper: uevent: version 1.0.3
[ 0.853794] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.853858] device-mapper: multipath: version 1.1.0 loaded
[ 0.853861] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.853953] EISA: Probing bus 0 at eisa.0
[ 0.853977] EISA: Detected 0 cards.
[ 0.854079] cpuidle: using governor ladder
[ 0.854132] cpuidle: using governor menu
[ 0.854544] TCP cubic registered
[ 0.854671] NET: Registered protocol family 10
[ 0.855054] lo: Disabled Privacy Extensions
[ 0.855338] NET: Registered protocol family 17
[ 0.855352] Bluetooth: L2CAP ver 2.13
[ 0.855353] Bluetooth: L2CAP socket layer initialized
[ 0.855355] Bluetooth: SCO (Voice Link) ver 0.6
[ 0.855357] Bluetooth: SCO socket layer initialized
[ 0.855380] Bluetooth: RFCOMM TTY layer initialized
[ 0.855383] Bluetooth: RFCOMM socket layer initialized
[ 0.855385] Bluetooth: RFCOMM ver 1.11
[ 0.856137] Using IPI No-Shortcut mode
[ 0.856184] PM: Resume from disk failed.
[ 0.856194] registered taskstats version 1
[ 0.856307] Magic number: 14:378:549
[ 0.856328] pci_link PNP0C0F:00: hash matches
[ 0.856363] rtc_cmos 00:04: setting system clock to 2010-02-24 20:31:23 UTC (1267043483)
[ 0.856365] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.856367] EDD information not available.
[ 0.871820] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.980516] ata5.00: ATAPI: PIONEER DVD-RW DVR-118L, 1.02, max UDMA/100
[ 0.996533] ata5.00: configured for UDMA/100
[ 1.146619] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.157212] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.456014] usb 4-2: new low speed USB device using uhci_hcd and address 2
[ 1.478624] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 1.478636] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.624561] usb 4-2: configuration #1 chosen from 1 choice
[ 1.632063] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.632075] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.640407] ata1.00: ATA-8: ST3500418AS, CC38, max UDMA/133
[ 1.640410] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.656410] ata1.00: configured for UDMA/133
[ 1.656528] scsi 0:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5
[ 1.656656] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.656687] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.656727] sd 0:0:0:0: [sda] Write Protect is off
[ 1.656729] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.656749] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.656846] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 >
[ 1.751175] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.864013] usb 5-2: new full speed USB device using uhci_hcd and address 2
[ 2.057748] usb 5-2: configuration #1 chosen from 1 choice
[ 22.804045] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 22.804056] ata5.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0 dma 96 in
[ 22.804058] cdb 12 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00
[ 22.804059] res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 22.804063] ata5.00: status: { DRDY }
[ 27.844014] ata5: link is slow to respond, please be patient (ready=0)
[ 32.828013] ata5: device not ready (errno=-16), forcing hardreset
[ 32.828023] ata5: soft resetting link
[ 33.000062] ata5.00: both IDENTIFYs aborted, assuming NODEV
[ 33.000065] ata5.00: revalidation failed (errno=-2)
[ 37.984028] ata5: soft resetting link
[ 38.164532] ata5.00: configured for UDMA/100
[ 38.167505] ata5: EH complete
[ 58.804041] ata5.00: limiting speed to UDMA/66:PIO4
[ 58.804045] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 58.804056] ata5.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0 dma 96 in
[ 58.804057] cdb 12 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00
[ 58.804059] res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 58.804062] ata5.00: status: { DRDY }
[ 63.844013] ata5: link is slow to respond, please be patient (ready=0)
[ 68.828014] ata5: device not ready (errno=-16), forcing hardreset
[ 68.828023] ata5: soft resetting link
[ 69.000062] ata5.00: both IDENTIFYs aborted, assuming NODEV
[ 69.000065] ata5.00: revalidation failed (errno=-2)
[ 73.984024] ata5: soft resetting link
[ 74.164536] ata5.00: configured for UDMA/66
[ 74.167696] ata5: EH complete
[ 94.816040] ata5.00: limiting speed to UDMA/33:PIO4
[ 94.816043] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 94.816053] ata5.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0 dma 96 in
[ 94.816055] cdb 12 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00
[ 94.816056] res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 94.816060] ata5.00: status: { DRDY }
[ 99.856013] ata5: link is slow to respond, please be patient (ready=0)
[ 104.840014] ata5: device not ready (errno=-16), forcing hardreset
[ 104.840023] ata5: soft resetting link
[ 105.012060] ata5.00: both IDENTIFYs aborted, assuming NODEV
[ 105.012063] ata5.00: revalidation failed (errno=-2)
[ 109.996025] ata5: soft resetting link
[ 110.176532] ata5.00: configured for UDMA/33
[ 110.179673] ata5: EH complete
[ 130.804040] ata5.00: limiting speed to PIO4
[ 130.804044] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 130.804054] ata5.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0 dma 96 in
[ 130.804056] cdb 12 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00
[ 130.804057] res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 130.804061] ata5.00: status: { DRDY }
[ 135.844012] ata5: link is slow to respond, please be patient (ready=0)
[ 140.828014] ata5: device not ready (errno=-16), forcing hardreset
[ 140.828023] ata5: soft resetting link
[ 141.000062] ata5.00: both IDENTIFYs aborted, assuming NODEV
[ 141.000065] ata5.00: revalidation failed (errno=-2)
[ 145.984024] ata5: soft resetting link
[ 146.164467] ata5.00: configured for PIO4
[ 146.167441] ata5: EH complete
[ 146.167445] scsi scan: 96 byte inquiry failed. Consider BLIST_INQUIRY_36 for this device
[ 146.170575] scsi 4:0:0:0: CD-ROM PIONEER DVD-RW DVR-118L 1.02 PQ: 0 ANSI: 5
[ 146.193760] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 146.193763] Uniform CD-ROM driver Revision: 3.20
[ 146.193844] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 146.193883] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 146.348095] Freeing unused kernel memory: 540k freed
[ 146.348346] Write protecting the kernel text: 4568k
[ 146.348385] Write protecting the kernel read-only data: 1836k
[ 146.441780] Linux agpgart interface v0.103
[ 146.478630] usbcore: registered new interface driver hiddev
[ 146.494175] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input4
[ 146.494243] generic-usb 0003:192F:0416.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-2/input0
[ 146.494260] usbcore: registered new interface driver usbhid
[ 146.494263] usbhid: v2.6:USB HID core driver
[ 146.498930] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 146.498947] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 146.498982] r8169 0000:04:00.0: setting latency timer to 64
[ 146.499023] alloc irq_desc for 28 on node -1
[ 146.499025] alloc kstat_irqs on node -1
[ 146.499037] r8169 0000:04:00.0: irq 28 for MSI/MSI-X
[ 146.499577] eth0: RTL8168c/8111c at 0xf8108000, 6c:f0:49:03:96:d2, XID 3c4000c0 IRQ 28
[ 147.885028] PM: Starting manual resume from disk
[ 147.885032] PM: Resume from partition 8:10
[ 147.885034] PM: Checking hibernation image.
[ 147.885177] PM: Resume from disk failed.
[ 147.899744] EXT4-fs (sda9): barriers enabled
[ 147.907966] kjournald2 starting: pid 386, dev sda9:8, commit interval 5 seconds
[ 147.907981] EXT4-fs (sda9): delayed allocation enabled
[ 147.907984] EXT4-fs: file extents enabled
[ 147.913413] EXT4-fs: mballoc enabled
[ 147.913424] EXT4-fs (sda9): mounted filesystem with ordered data mode
[ 148.377969] type=1505 audit(1267043631.020:2): operation="profile_load" pid=409 name=/usr/share/gdm/guest-session/Xsession
[ 148.380389] type=1505 audit(1267043631.023:3): operation="profile_load" pid=410 name=/sbin/dhclient3
[ 148.381066] type=1505 audit(1267043631.023:4): operation="profile_load" pid=410 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 148.381410] type=1505 audit(1267043631.023:5): operation="profile_load" pid=410 name=/usr/lib/connman/scripts/dhclient-script
[ 148.429896] type=1505 audit(1267043631.071:6): operation="profile_load" pid=411 name=/usr/bin/evince
[ 148.440074] type=1505 audit(1267043631.080:7): operation="profile_load" pid=411 name=/usr/bin/evince-previewer
[ 148.446092] type=1505 audit(1267043631.088:8): operation="profile_load" pid=411 name=/usr/bin/evince-thumbnailer
[ 148.471950] type=1505 audit(1267043631.112:9): operation="profile_load" pid=413 name=/usr/lib/cups/backend/cups-pdf
[ 148.472723] type=1505 audit(1267043631.116:10): operation="profile_load" pid=413 name=/usr/sbin/cupsd
[ 148.478347] type=1505 audit(1267043631.120:11): operation="profile_load" pid=414 name=/usr/sbin/tcpdump
[ 154.537092] Adding 3574420k swap on /dev/sda10. Priority:-1 extents:1 across:3574420k
[ 154.540010] udev: starting version 147
[ 154.593723] parport_pc 00:08: reported by Plug and Play ACPI
[ 154.593766] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 154.622664] lp: driver loaded but no devices found
[ 154.655518] nvidia: module license 'NVIDIA' taints kernel.
[ 154.655522] Disabling lock debugging due to kernel taint
[ 154.695376] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 154.741238] alloc irq_desc for 22 on node -1
[ 154.741241] alloc kstat_irqs on node -1
[ 154.741247] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 154.741274] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 154.760184] lp0: using parport0 (interrupt-driven).
[ 154.792197] ppdev: user-space parallel port driver
[ 154.818124] EXT4-fs (sda9): internal journal on sda9:8
[ 154.837647] Linux video capture interface: v2.00
[ 154.839363] gspca: main v2.6.0 registered
[ 154.840176] gspca: probing 0ac8:303b
[ 154.866734] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 154.909940] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 154.909946] nvidia 0000:01:00.0: setting latency timer to 64
[ 154.910043] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.20 Thu Jun 25 19:23:24 PDT 2009
[ 155.191709] zc3xx: probe sensor -> 000a
[ 155.191713] zc3xx: Find Sensor PB0330. Chip revision 0
[ 155.195768] gspca: probe ok
[ 155.195790] usbcore: registered new interface driver zc3xx
[ 155.195794] zc3xx: registered
[ 155.267354] type=1505 audit(1267014837.907:12): operation="profile_replace" pid=940 name=/usr/share/gdm/guest-session/Xsession
[ 155.269606] type=1505 audit(1267014837.911:13): operation="profile_replace" pid=941 name=/sbin/dhclient3
[ 155.270244] type=1505 audit(1267014837.911:14): operation="profile_replace" pid=941 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 155.270591] type=1505 audit(1267014837.911:15): operation="profile_replace" pid=941 name=/usr/lib/connman/scripts/dhclient-script
[ 155.273783] type=1505 audit(1267014837.915:16): operation="profile_replace" pid=942 name=/usr/bin/evince
[ 155.284675] type=1505 audit(1267014837.927:17): operation="profile_replace" pid=942 name=/usr/bin/evince-previewer
[ 155.290700] type=1505 audit(1267014837.931:18): operation="profile_replace" pid=942 name=/usr/bin/evince-thumbnailer
[ 155.302088] type=1505 audit(1267014837.943:19): operation="profile_replace" pid=953 name=/usr/lib/cups/backend/cups-pdf
[ 155.302832] type=1505 audit(1267014837.943:20): operation="profile_replace" pid=953 name=/usr/sbin/cupsd
[ 155.305173] type=1505 audit(1267014837.947:21): operation="profile_replace" pid=956 name=/usr/sbin/tcpdump
[ 156.155384] CPU0 attaching NULL sched-domain.
[ 156.155389] CPU1 attaching NULL sched-domain.
[ 156.168076] CPU0 attaching sched-domain:
[ 156.168080] domain 0: span 0-1 level MC
[ 156.168083] groups: 0 1
[ 156.168088] domain 1: span 0-1 level CPU
[ 156.168091] groups: 0-1 (__cpu_power = 2048)
[ 156.168097] CPU1 attaching sched-domain:
[ 156.168099] domain 0: span 0-1 level MC
[ 156.168102] groups: 1 0
[ 156.168107] domain 1: span 0-1 level CPU
[ 156.168110] groups: 0-1 (__cpu_power = 2048)
[ 158.238812] r8169: eth0: link up
[ 158.238817] r8169: eth0: link up
[ 158.275280] NET: Registered protocol family 24
[ 162.288735] CPU0 attaching NULL sched-domain.
[ 162.288740] CPU1 attaching NULL sched-domain.
[ 162.300548] CPU0 attaching sched-domain:
[ 162.300551] domain 0: span 0-1 level MC
[ 162.300553] groups: 0 1
[ 162.300557] CPU1 attaching sched-domain:
[ 162.300559] domain 0: span 0-1 level MC
[ 162.300561] groups: 1 0
[ 168.964010] eth0: no IPv6 routers present
[ 663.519162] NVRM: Xid (0001:00): 13, 0001 00000000 00005039 00000218 00270000 00000002
[ 681.439413] NVRM: Xid (0001:00): 13, 0003 00000000 00008297 00000e08 0373000f 00000040
[ 683.520387] NVRM: Xid (0001:00): 13, 0003 00000000 00008297 00000e08 0384036c 00000040
[ 683.598451] NVRM: Xid (0001:00): 13, 0003 00000000 00008297 000015e0 00000000 00000040
[ 683.659782] NVRM: Xid (0001:00): 13, 0003 00000000 00008297 000015e0 00000000 00000040
[ 684.255961] NVRM: Xid (0001:00): 13, 0003 00000000 00008297 00000e08 005a0024 00000040
[ 684.341309] NVRM: Xid (0001:00): 13, 0003 00000000 00008297 00000e08 0369034b 00000040
[ 684.416468] NVRM: Xid (0001:00): 13, 0003 00000000 00008297 00000e08 02d3028b 00000040


页首
 用户资料  
 
8 楼 
 文章标题 : Re: 新安装了ubuntu 9.10,启动速度超级慢!
帖子发表于 : 2010-02-24 21:32 

注册: 2010-02-24 13:23
帖子: 16
送出感谢: 0 次
接收感谢: 0 次
我只点击了一次提交,不知道为什么被提交了两次。请管理员帮助删除掉多余的 。

@happyz90: 有一次 是死机了。一般是reboot。


页首
 用户资料  
 
9 楼 
 文章标题 : Re: 新安装了ubuntu 9.10,启动速度超级慢!
帖子发表于 : 2010-02-24 21:35 

注册: 2010-02-24 13:23
帖子: 16
送出感谢: 0 次
接收感谢: 0 次
还有,我看到系统菜单里面有一项hiberate,但是试过两次都会死机,再也不敢用了。

希望大虾们帮助我解决这个启动速度慢的问题。感激不尽!:)


页首
 用户资料  
 
10 楼 
 文章标题 : Re: 新安装了ubuntu 9.10,启动速度超级慢!
帖子发表于 : 2010-02-24 21:44 
头像

注册: 2009-08-17 3:52
帖子: 1099
送出感谢: 0 次
接收感谢: 1
lz的dmesg好猛!
我的:
[ 13.986315] type=1505 audit(1267002105.982:14): operation="profile_load" pid=836 name="/usr/bin/evince-thumbnailer"
[ 14.001487] hda_codec: ALC262: BIOS auto-probing.
[ 14.002336] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 14.216165] sky2 eth0: enabling interface
[ 14.216357] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.070652] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.604766] ppdev: user-space parallel port driver
[ 938.693229] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx
[ 938.693690] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 949.260045] eth0: no IPv6 routers present
[ 973.117847] NET: Registered protocol family 24
[ 976.454757] ip_tables: (C) 2000-2006 Netfilter Core Team

开机一般就在 25-30秒。
完整的:
附件:
dmesg.txt [49.52 KiB]
被下载 27 次


附件:
Screenshot-系統監控.png
Screenshot-系統監控.png [ 30.85 KiB | 被浏览 2808 次 ]



_________________
We believe that the internet should be public, open and accessible.
软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。
iceplayer! linux音乐新体验~ 最新版本4.0.5-20110520已更新!http://forum.ubuntu.org.cn/viewtopic.php?f=137&t=252461
想要iceplayer 测试版麼?加入QQ群80071264吧,在code.google也可找到
http://www.iceplayer.org/
http://jasy.ice.blog.163.com/
页首
 用户资料  
 
11 楼 
 文章标题 : Re: 新安装了ubuntu 9.10,启动速度超级慢!
帖子发表于 : 2010-02-24 21:51 

注册: 2010-02-24 13:23
帖子: 16
送出感谢: 0 次
接收感谢: 0 次
好痛苦,刚刚看了时间,我的系统从在grub菜单中回车到登录界面出现需要耗时2分 45秒。 555555....


页首
 用户资料  
 
12 楼 
 文章标题 : Re: 新安装了ubuntu 9.10,启动速度超级慢!
帖子发表于 : 2010-02-24 21:55 
头像

注册: 2009-03-28 15:12
帖子: 7867
送出感谢: 2
接收感谢: 20
ata5.00: ATAPI: PIONEER DVD-RW DVR-118L
这个设备响应时间不对,是不是有光盘在里面,还是设备有问题 ?


_________________
Grub2 基础教程


页首
 用户资料  
 
13 楼 
 文章标题 : Re: 新安装了ubuntu 9.10,启动速度超级慢!
帖子发表于 : 2010-02-24 22:04 
头像

注册: 2009-08-17 3:52
帖子: 1099
送出感谢: 0 次
接收感谢: 1
好像硬盘的报告好多。


_________________
We believe that the internet should be public, open and accessible.
软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。
iceplayer! linux音乐新体验~ 最新版本4.0.5-20110520已更新!http://forum.ubuntu.org.cn/viewtopic.php?f=137&t=252461
想要iceplayer 测试版麼?加入QQ群80071264吧,在code.google也可找到
http://www.iceplayer.org/
http://jasy.ice.blog.163.com/


页首
 用户资料  
 
14 楼 
 文章标题 : Re: 新安装了ubuntu 9.10,启动速度超级慢!
帖子发表于 : 2010-02-24 22:12 

注册: 2010-02-24 13:23
帖子: 16
送出感谢: 0 次
接收感谢: 0 次
@smallapple:是有一次启动是光驱里面有光盘,不过大部分时间里面都没有放光盘,而且即使不放光盘速度还是没有任何改善。设备应该不存在大问题吧,我的机器是新的,才装了三个月,DVD-ROM不怎么使用的。

btw:
一直奇怪为什么我刚才找不到添加附件的地方,原来CHROME浏览器中看不到页面下方添加附件的部分,须得使用FIREFOX方可。 :(


页首
 用户资料  
 
15 楼 
 文章标题 : Re: 新安装了ubuntu 9.10,启动速度超级慢!
帖子发表于 : 2010-02-24 22:37 
头像

注册: 2009-03-28 15:12
帖子: 7867
送出感谢: 2
接收感谢: 20
[ 22.804045] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 22.804056] ata5.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0 dma 96 in
.......
[ 146.164467] ata5.00: configured for PIO4
[ 146.167441] ata5: EH complete

这里用了两分多钟来配置 ata5.00上的DVD RW,如果确定PIONEER DVD-RW没问题,调整bios中有关该刻录机的模式试试,或检查下DVD RW 的排线。


_________________
Grub2 基础教程


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 34 篇帖子 ]  前往页数 1, 2, 3  下一页

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 3 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译