当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 9 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : [问题]刚刚编译2.6.18.1内核,X启动不起来!
帖子发表于 : 2006-10-16 18:27 

注册: 2006-10-15 10:12
帖子: 163
送出感谢: 0 次
接收感谢: 0 次
显卡是NV的!GF4


原来的2.6.15可以进来的!


新的内核好像 /etc/X11/xorg.conf 需要改?

请问怎么改动?


页首
 用户资料  
 
2 楼 
 文章标题 :
帖子发表于 : 2006-10-16 18:46 
头像

注册: 2006-07-02 11:16
帖子: 12522
地址: 廣州
送出感谢: 0 次
接收感谢: 8
用源裏的..不要做不必要的更新..


_________________
^_^ ~~~
要理解递归,首先要理解递归。

地球人都知道,理论上,理论跟实际是没有差别的,但实际上,理论跟实际的差别是相当大滴。


页首
 用户资料  
 
3 楼 
 文章标题 :
帖子发表于 : 2006-10-16 19:35 

注册: 2006-10-15 10:12
帖子: 163
送出感谢: 0 次
接收感谢: 0 次
刚刚编译完,只能进入字符界面!进不去X-WINDOW!

我的OS是:UBUNTU6.0.6 显卡是:NV的GF4

原来的内核2.6.15完全正常

提示错误: Failed to start the X Server

It is likely that it is not set up correctly




我的/etc/X11/xorg.conf如下:

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
Identifier "NVIDIA Corporation NV17 [GeForce4 MX 440]"
Driver "nvidia"
BusID "PCI:1:0:0"
EndSection

Section "Monitor"
Identifier "PHILIPS 107S"
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV17 [GeForce4 MX 440]"
Monitor "PHILIPS 107S"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection

Section "DRI"
Mode 0666
EndSection





LOG 内容:

II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(II) XINPUT: Adding extended input device "cursor" (type: Wacom Cursor)
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type: Other)
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) NVIDIA(0): Setting mode "1024x768"


页首
 用户资料  
 
4 楼 
 文章标题 :
帖子发表于 : 2006-10-16 20:27 
头像

注册: 2006-07-02 11:16
帖子: 12522
地址: 廣州
送出感谢: 0 次
接收感谢: 8
我想应该是内核更新了,但可再发行模块与内核版本不一致..


_________________
^_^ ~~~
要理解递归,首先要理解递归。

地球人都知道,理论上,理论跟实际是没有差别的,但实际上,理论跟实际的差别是相当大滴。


页首
 用户资料  
 
5 楼 
 文章标题 :
帖子发表于 : 2006-10-16 21:02 

注册: 2006-10-15 10:12
帖子: 163
送出感谢: 0 次
接收感谢: 0 次
把nvidia换成nv试试:OK!
不过有点BUG,NV的驱动用不了,而且启动画面 没有,即选择了2.6.18后就是灰屏,直到DOSFSCK 检查出现


页首
 用户资料  
 
6 楼 
 文章标题 :
帖子发表于 : 2006-10-18 2:00 
头像

注册: 2006-10-18 0:36
帖子: 281
地址: Core
送出感谢: 0 次
接收感谢: 0 次
是新内核和显卡驱动之间的问题,如果把nvidia换成nv那就用了x原来的驱动``不是nvidia你装的了··你应该去nvidia看看有没有新版和重新安装一次显卡驱动`````````


_________________
T60p/T7600/2G/WD1600BJKT/BT/AR5008/V5200/15' QXGA


页首
 用户资料  
 
7 楼 
 文章标题 :
帖子发表于 : 2006-10-18 16:46 

注册: 2006-10-15 10:12
帖子: 163
送出感谢: 0 次
接收感谢: 0 次
xjflyttp 写道:
是新内核和显卡驱动之间的问题,如果把nvidia换成nv那就用了x原来的驱动``不是nvidia你装的了··你应该去nvidia看看有没有新版和重新安装一次显卡驱动`````````




最新的NV驱动是多少?大概的号,也不直到哪个是最新的,哪个具体的地址?
谢谢啦


页首
 用户资料  
 
8 楼 
 文章标题 :
帖子发表于 : 2006-10-18 20:40 
头像

注册: 2006-07-02 11:16
帖子: 12522
地址: 廣州
送出感谢: 0 次
接收感谢: 8
問題是要從新遍以内核模塊。。


_________________
^_^ ~~~
要理解递归,首先要理解递归。

地球人都知道,理论上,理论跟实际是没有差别的,但实际上,理论跟实际的差别是相当大滴。


页首
 用户资料  
 
9 楼 
 文章标题 :
帖子发表于 : 2006-10-19 19:53 

注册: 2006-10-15 10:12
帖子: 163
送出感谢: 0 次
接收感谢: 0 次
BigSnake.NET 写道:
問題是要從新遍以内核模塊。。



呵呵!那就重新编译一次!


不过,下次编译的时候 需要注意哪个地方??能够使NV的驱动能用?

谢谢


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 9 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 4 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译