当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 9 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : 编译2.6.18.1内核后,进不去X-WINDOW
帖子发表于 : 2006-10-16 19:34 

注册: 2006-10-15 10:12
帖子: 163
送出感谢: 0 次
接收感谢: 0 次
刚刚编译完,只能进入字符界面!进不去X-WINDOW!

我的OS是:UBUNTU6.0.6 显卡是:NV的GF4

原来的内核2.6.15完全正常

提示错误: Failed to start the X Server

It is likely that it is not set up correctly




我的/etc/X11/xorg.conf如下:

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
Identifier "NVIDIA Corporation NV17 [GeForce4 MX 440]"
Driver "nvidia"
BusID "PCI:1:0:0"
EndSection

Section "Monitor"
Identifier "PHILIPS 107S"
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV17 [GeForce4 MX 440]"
Monitor "PHILIPS 107S"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection

Section "DRI"
Mode 0666
EndSection





LOG 内容:

II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(II) XINPUT: Adding extended input device "cursor" (type: Wacom Cursor)
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type: Other)
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) NVIDIA(0): Setting mode "1024x768"


页首
 用户资料  
 
2 楼 
 文章标题 :
帖子发表于 : 2006-10-16 20:04 
头像

注册: 2005-12-09 15:33
帖子: 179
地址: 云南.昆明
送出感谢: 0 次
接收感谢: 0 次
引用:
Section "Device"
Identifier "NVIDIA Corporation NV17 [GeForce4 MX 440]"
Driver "nvidia"
BusID "PCI:1:0:0"
EndSection


该nvidia为nv
试试


页首
 用户资料  
 
3 楼 
 文章标题 :
帖子发表于 : 2006-10-16 20:53 

注册: 2006-10-15 10:12
帖子: 163
送出感谢: 0 次
接收感谢: 0 次
nvidia换成nv试试:OK!
不过有点BUG,NV的驱动用不了,而且启动画面 没有,即选择了2.6.18后就是灰屏,直到DOSFSCK 检查出现


页首
 用户资料  
 
4 楼 
 文章标题 :
帖子发表于 : 2006-10-16 22:38 

注册: 2006-08-30 23:02
帖子: 16
送出感谢: 0 次
接收感谢: 0 次
编译内核后应该重新安装驱动


页首
 用户资料  
 
5 楼 
 文章标题 :
帖子发表于 : 2006-10-17 7:00 
头像

注册: 2005-12-09 15:33
帖子: 179
地址: 云南.昆明
送出感谢: 0 次
接收感谢: 0 次
现在还没有 2.6.18的驱动包。手动安装太麻烦


页首
 用户资料  
 
6 楼 
 文章标题 :
帖子发表于 : 2006-10-17 8:03 
头像

注册: 2006-05-20 6:25
帖子: 1263
地址: 山东淄博
送出感谢: 0 次
接收感谢: 0 次
看了是鼠标(Watcom?)或是是显卡的问题?


页首
 用户资料  
 
7 楼 
 文章标题 :
帖子发表于 : 2006-10-17 12:30 

注册: 2006-10-15 10:12
帖子: 163
送出感谢: 0 次
接收感谢: 0 次
leewtao 写道:
现在还没有 2.6.18的驱动包。手动安装太麻烦




驱动包?包括NV的驱动吗?
手动编译安装时候应该注意设置哪些选项呢?
谢谢


页首
 用户资料  
 
8 楼 
 文章标题 :
帖子发表于 : 2006-10-17 12:40 

注册: 2006-10-15 10:12
帖子: 163
送出感谢: 0 次
接收感谢: 0 次
ylm1982 写道:
编译内核后应该重新安装驱动




重新安装了还是不行啊!


页首
 用户资料  
 
9 楼 
 文章标题 :
帖子发表于 : 2006-10-17 15:13 
头像

注册: 2005-08-14 21:55
帖子: 58428
地址: 长沙
送出感谢: 4
接收感谢: 272
编译内核的后果,就是不如用gentoo了。要不以后的debian包依赖多半出问题。


_________________
● 鸣学


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 9 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 4 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译