[问题]硬件冲突怎么办?

为当前最终发行版之前的所有版本提供支持
回复
头像
Ragingflames
帖子: 89
注册时间: 2006-09-08 19:59
送出感谢: 0
接收感谢: 0

[问题]硬件冲突怎么办?

#1

帖子 Ragingflames » 2006-10-22 10:09

0000:00:00.0 Host bridge: ATI Technologies Inc: Unknown device 5a33 (rev 01)
Subsystem: ATI Technologies Inc: Unknown device 5a33
Flags: bus master, 66MHz, medium devsel, latency 64
Memory at f4000000 (32-bit, prefetchable)
Memory at fdfff000 (32-bit, non-prefetchable)
Memory at <ignored> (64-bit, non-prefetchable)
Capabilities: <available only to root>

0000:00:02.0 PCI bridge: ATI Technologies Inc RS480 PCI-X Root Port (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fa000000-fcffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000dff00000
Capabilities: <available only to root>

0000:00:11.0 IDE interface: ATI Technologies Inc ATI 437A Serial ATA Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ATI Technologies Inc ATI 437A Serial ATA Controller
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 201
I/O ports at ff00
I/O ports at fe00
I/O ports at fd00
I/O ports at fc00
I/O ports at fb00
Memory at fdffe000 (32-bit, non-prefetchable)
Expansion ROM at 40000000 [disabled]
Capabilities: <available only to root>

0000:00:12.0 IDE interface: ATI Technologies Inc ATI 4379 Serial ATA Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ATI Technologies Inc ATI 4379 Serial ATA Controller
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 209
I/O ports at fa00
I/O ports at f900 [size=4]
I/O ports at f800 [size=8]
I/O ports at f700 [size=4]
I/O ports at f600 [size=16]
Memory at fdffd000 (32-bit, non-prefetchable) [size=512]
Expansion ROM at 40080000 [disabled] [size=512K]
Capabilities: <available only to root>

0000:00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc IXP SB400 USB Host Controller
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 225
Memory at fdffc000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>

0000:00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc IXP SB400 USB Host Controller
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 225
Memory at fdffb000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>

0000:00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80) (prog-if 20 [EHCI])
Subsystem: ATI Technologies Inc IXP SB400 USB2 Host Controller
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 225
Memory at fdffa000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>

0000:00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 81)
Subsystem: ATI Technologies Inc IXP SB400 SMBus Controller
Flags: 66MHz, medium devsel
I/O ports at 0400 [size=16]
Memory at fdff9000 (32-bit, non-prefetchable) [size=1K]

0000:00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI (rev 80) (prog-if 8a [Master SecP PriP])
Subsystem: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 217
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at f400 [size=16]
Capabilities: <available only to root>

0000:00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
Subsystem: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
Flags: bus master, 66MHz, medium devsel, latency 0

0000:00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80) (prog-if 01 [Subtractive decode])
Flags: bus master, VGA palette snoop, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fdd00000-fddfffff
Prefetchable memory behind bridge: fde00000-fdefffff

0000:00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 80)
Subsystem: ATI Technologies Inc IXP SB400 AC'97 Audio Controller
Flags: 66MHz, slow devsel, IRQ 233
Memory at fdff8000 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>

0000:01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 0393 (rev a1) (prog-if 00 [VGA])
Flags: bus master, fast devsel, latency 0, IRQ 50
Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Memory at c0000000 (64-bit, prefetchable) [size=512M]
Memory at fb000000 (64-bit, non-prefetchable) [size=16M]
I/O ports at ef00 [size=128]
Expansion ROM at fc000000 [disabled] [size=128K]
Capabilities: <available only to root>

0000:02:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Flags: bus master, medium devsel, latency 64, IRQ 58
I/O ports at de00 [size=256]
Memory at fddff000 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>


怎么解决啊
ALC655 SB450的声卡的福音请去我帖子

http://forum.ubuntu.org.cn/viewtopic.ph ... highlight=
回复

回到 “老旧版本支持”