[问题]求救在drcom 下不能上网问题！

[veke2008]

大家好 ，我最近刚刚安装成功Ubuntu Edge，刚安装完毕的时候，我的机器由于用的是北京热点城市的 drcom上网拨号ADSL网络，需要配置，才能上网。在此之前的版本我都可以按照网上的贴子使drcom上网。这几天我是通过别人的固定IP上网升级更新系统的。更新之后，我发现drcom-1.3.2可以安装成功。例如上面的提示，我的drcom.conf文件都是以前保存的 内容直接复制过来的，这点应该没有问题。但最终结果还是上不了网。
有请各位大哥帮一下忙。谢谢了！


veke@pc-liu:~$ cd drcom*
veke@pc-liu:~/drcom-1.3.2$ make
make -C drcomc
make[1]: Entering directory `/home/veke/drcom-1.3.2/drcomc'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/veke/drcom-1.3.2/drcomc'
make -C drcomd
make[1]: Entering directory `/home/veke/drcom-1.3.2/drcomd'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/veke/drcom-1.3.2/drcomd'
make -C kmod
make[1]: Entering directory `/home/veke/drcom-1.3.2/kmod'
make -C /lib/modules/2.6.17-10-generic/build M=/home/veke/drcom-1.3.2/kmod modules
make[2]: Entering directory `/usr/src/linux-headers-2.6.17-10-generic'
Building modules, stage 2.
MODPOST
make[2]: Leaving directory `/usr/src/linux-headers-2.6.17-10-generic'
make[1]: Leaving directory `/home/veke/drcom-1.3.2/kmod'
veke@pc-liu:~/drcom-1.3.2$ sudo make install
make -C drcomc install
make[1]: Entering directory `/home/veke/drcom-1.3.2/drcomc'
mkdir -p /usr/local/bin/
install -m 755 drcomc /usr/local/bin/
make[1]: Leaving directory `/home/veke/drcom-1.3.2/drcomc'
make -C drcomd install
make[1]: Entering directory `/home/veke/drcom-1.3.2/drcomd'
mkdir -p /usr/local/bin/
install -m 700 drcomd /usr/local/bin/
make[1]: Leaving directory `/home/veke/drcom-1.3.2/drcomd'
make -C kmod install
make[1]: Entering directory `/home/veke/drcom-1.3.2/kmod'
make -C /lib/modules/2.6.17-10-generic/build M=/home/veke/drcom-1.3.2/kmod modules
make[2]: Entering directory `/usr/src/linux-headers-2.6.17-10-generic'
Building modules, stage 2.
MODPOST
make[2]: Leaving directory `/usr/src/linux-headers-2.6.17-10-generic'
make -C /lib/modules/2.6.17-10-generic/build M=/home/veke/drcom-1.3.2/kmod modules_install
make[2]: Entering directory `/usr/src/linux-headers-2.6.17-10-generic'
INSTALL /home/veke/drcom-1.3.2/kmod/drcom.ko
DEPMOD 2.6.17-10-generic
make[2]: Leaving directory `/usr/src/linux-headers-2.6.17-10-generic'
/sbin/depmod -a 2.6.17-10-generic
make[1]: Leaving directory `/home/veke/drcom-1.3.2/kmod'
if [ -a /etc/drcom.conf ]; then \
echo "====================================" && \
echo "" && \
echo "/etc/drcom.conf exists.";\
echo "" && \
echo "You May Need to Edit /etc/drcom.conf" && \
echo "" && \
echo "====================================" \
;\
else\
install -m 600 drcom.conf /etc/drcom.conf && \
echo "====================================" && \
echo "" && \
echo "Do Not Forget To Edit /etc/drcom.conf" && \
echo "" && \
echo "====================================" \
;\
fi\

[: 17: /etc/drcom.conf: unexpected operator
====================================

Do Not Forget To Edit /etc/drcom.conf

====================================
veke@pc-liu:~$ sudo drcomc login
Password:
drcomc: Connect: Connection refused
veke@pc-liu:~$ sudo drcomd
veke@pc-liu:~$ sudo drcomc login
Login failed
Reason: 0我又重新试了一下 ：
veke@pc-liu:~/drcom-1.3.2$ sudo drcomd
Password:
drcomd: Bind failed: Address already in use
veke@pc-liu:~/drcom-1.3.2$ sudo drcomc login
Login failed
Reason: 0



这是我的drcom.conf:

username=kdxy8331854391883
password=xsfdisdfn
mac=00:A0:D1:D0:DF:5F
nic0=218.29.149.223
nic1=
nic2=
nic3=
dnsp=202.102.224.68
dnss=202.102.227.68
dhcp=255.255.254.0

hostip=218.29.149.223
servip=61.52.252.203
hostport=
servport=

hostname=
winver=
winbuild=
servicepack=