分页: 1 / 2

[原创]用evolution发送gmail

发表于 : 2006-11-03 11:01
kakald
在Gmail上找不到Evolution的配置方法,网上也有不少人询问如何配置,我在网上找到一篇英文的配置说明,我按其设置成功了,所以拿来与大家共享,简单翻译如下:

(注:要使用客户端发送接收gmail,需要在gmail中启用pop,具体见gmail的帮助)

  1. 启动Evolution。

  2. 点击“编辑”──首选项。

  3. 点击添加(账户)/注:如果你已经设置过gmail账户,则可以点击编辑。

  4. 在名称里输入你的名字,在请求的信息中全名和电子邮件地址都填写你的Email地址。填好之后点击接收电子邮件标签。

  5. 接收电子邮件:服务器类型:POP; 服务器:pop.gmail.com; 用户名:你的gmail地址,如kakald@gmail.com; 使用安全链接:SSL加密; 记住密码。设置好后点击下一个标签。

  6. 接收选项:按自己喜欢设置,并不影响gmail是否在evolution中工作。

  7. 发送电子邮件:服务器类型:smtp; 服务器:smtp.gmail.com; 服务器需要认证:选中; 使用安全链接,SSL加密; 身份验证:用默认的"Plain"; 用户名:同你的邮件地址,如kakald@gmail.com,最后记住密码。

  8. 默认选项卡可以依喜好设置,或保持默认。

  9. 点击应用,完成设置。
 
  现在你可以试试发送接收邮件,如果提示你输入密码,说明成功了,你可以用Evolution发送接收gmail邮件了。

  如果有问题请留言讨论,或到我的博客交流: http://kaka.lupaworld.com


  以下为原文:

Evolution

Start Evolution

Click on “Edit,” then “Preferences”

Click “Add”

Type in your name, email address, reply to address, (what email address you want people to write back to you with) and your organization, if any, and click forward.

Select your server type as “POP,” your host as “pop.gmail.com,” and make sure that your username is the same as your email address. Then under “Use Secure Connection” select always, and your “Authentication Type” as password, and finally click forward.

On the next page adjust settings as you like, they will not interfere with whether gmail will work with evolution or not. Then click forward.

Select server type as “smtp,” type in “smtp.gmail.com” as the host, and check that the “Host requires authentication” box is checked. Next, select, for “Use Secure Connection,” always. Finally, make sure that Authentication type is “Plain” and your user name should be the same as you email address. Click Forward.

On this page name your account whatever you want, it will not interfere with setup and click Forward.

Click apply.

Your done!

Re: [原创]用evolution发送gmail

发表于 : 2006-11-03 11:05
pipago
kakald 写了:在Gmail上找不到Evolution的配置方法,网上也有不少人询问如何配置,我在网上找到一篇英文的配置说明,我按其设置成功了,所以拿来与大家共享,简单翻译如下:

(注:要使用客户端发送接收gmail,需要在gmail中启用pop,具体见gmail的帮助)

  1. 启动Evolution。

  2. 点击“编辑”──首选项。

  3. 点击添加(账户)/注:如果你已经设置过gmail账户,则可以点击编辑。

  4. 在名称里输入你的名字,在请求的信息中全名和电子邮件地址都填写你的Email地址。填好之后点击接收电子邮件标签。

  5. 接收电子邮件:服务器类型:POP; 服务器:pop.gmail.com; 用户名:你的gmail地址,如kakald@gmail.com; 使用安全链接:SSL加密; 记住密码。设置好后点击下一个标签。

  6. 接收选项:按自己喜欢设置,并不影响gmail是否在evolution中工作。

  7. 发送电子邮件:服务器类型:smtp; 服务器:smtp.gmail.com; 服务器需要认证:选中; 使用安全链接,SSL加密; 身份验证:用默认的"Plain"; 用户名:同你的邮件地址,如kakald@gmail.com,最后记住密码。

  8. 默认选项卡可以依喜好设置,或保持默认。

  9. 点击应用,完成设置。
 
  现在你可以试试发送接收邮件,如果提示你输入密码,说明成功了,你可以用Evolution发送接收gmail邮件了。

  如果有问题请留言讨论,或到我的博客交流: http://kaka.lupaworld.com


  以下为原文:

Evolution

Start Evolution

Click on “Edit,” then “Preferences”

Click “Add”

Type in your name, email address, reply to address, (what email address you want people to write back to you with) and your organization, if any, and click forward.

Select your server type as “POP,” your host as “pop.gmail.com,” and make sure that your username is the same as your email address. Then under “Use Secure Connection” select always, and your “Authentication Type” as password, and finally click forward.

On the next page adjust settings as you like, they will not interfere with whether gmail will work with evolution or not. Then click forward.

Select server type as “smtp,” type in “smtp.gmail.com” as the host, and check that the “Host requires authentication” box is checked. Next, select, for “Use Secure Connection,” always. Finally, make sure that Authentication type is “Plain” and your user name should be the same as you email address. Click Forward.

On this page name your account whatever you want, it will not interfere with setup and click Forward.

Click apply.

Your done!
这是你写的?
我就是按照这篇设置成功的,多谢了。

发表于 : 2006-11-03 11:15
kakald
呵呵, 不客气,我只是翻译一下那篇英文, 分享一下经验,谢谢支持

欢迎来我的博客一起交流,我在上面写我学习linux的日志,

http://kaka.lupaworld.com

发表于 : 2006-11-03 11:20
SuperWar3Fan
路过。。。

发表于 : 2007-07-22 17:44
wyfpuppy
谢谢!!

发表于 : 2007-07-23 11:17
fjing
其实与一般配置POP3和SMTP邮件服务一样,只是GMAIL需要SSL加密连接而已,只要支持SSL加密连接的邮件客户端都可以。用FOXMAIL,DREAMAIL,THUNDERBIRD,OE都可正常工作。

发表于 : 2007-07-23 12:18
hualang0929
我无论使用什么邮件客户端都出现 “pop连接超时”
都不知道怎么搞,直接用Fx~~~

发表于 : 2007-08-10 12:55
David_Lee
我配置以后密码老是不能通过验证,怎么回事?已经排除输错密码了

发表于 : 2007-10-16 21:48
hellojinjie
gmail的 pop端口不是和一般的不一样的吗
这不需要设置的吗

发表于 : 2007-10-25 14:04
spiderub
我是按上面说的做的,从但是出现 了下面的问题啊!

是什么问题呢?

[/img][/list]

发表于 : 2008-01-24 20:24
kevinzhang
谢谢,已经配置好了,呵呵

发表于 : 2008-01-25 17:35
bigcha.dragon
我也搞定啦!谢谢啊 :D

发表于 : 2008-01-26 17:59
millenniumdark
http://weakish.int.eu.org/blog/2008/01/ ... mail.xhtml 这是一篇设置Evolution下设置gmail的imap和smtp的。(英文)

发表于 : 2008-02-18 17:22
tgwen
谢谢!!按你的说明,配置成功!!感谢!学习了!!!

发表于 : 2008-04-04 13:23
tongttt
终于可以用它来收发邮件了。