vmware tools的安装问题，请各位高手帮忙来看看

[wenlz]

vmware版本：6.5.2build156735
ubuntu版本：9.10内核版本：2.6.31-20generic
按提示安装好vmware tools后运行vmware-config-tools.pl进行配置，提示不存在对应内核的配置文件，需重新编译。
确认进行编译后提示如下错误：
wenlz@wenlz-desktop:/usr/bin$ sudo vmware-config-tools.pl
[sudo] password for wenlz:

Stopping VMware Tools services in the virtual machine:
Guest operating system daemon: done
Virtual Printing daemon: done
insserv: warning: script 'K01acpi-support' missing LSB tags and overrides
insserv: warning: current stop runlevel(s) (0 2 3 5 6) of script `vmware-tools' overwrites defaults (0 6).
insserv: warning: current start runlevel(s) (6) of script `reboot' overwrites defaults (empty).
insserv: warning: script 'cron' missing LSB tags and overrides
insserv: warning: script 'avahi-daemon' missing LSB tags and overrides
insserv: warning: script 'acpi-support' missing LSB tags and overrides
insserv: warning: current start runlevel(s) (0 6) of script `umountroot' overwrites defaults (empty).
insserv: warning: script 'dmesg' missing LSB tags and overrides
insserv: warning: current start runlevel(s) (0 6) of script `networking' overwrites defaults (empty).
insserv: warning: script 'anacron' missing LSB tags and overrides
insserv: warning: script 'rsyslog-kmsg' missing LSB tags and overrides
insserv: warning: script 'udev' missing LSB tags and overrides
insserv: warning: script 'acpid' missing LSB tags and overrides
insserv: warning: script 'udev-finish' missing LSB tags and overrides
insserv: warning: script 'dbus' missing LSB tags and overrides
insserv: warning: current start runlevel(s) (0 6) of script `wpa-ifupdown' overwrites defaults (empty).
insserv: warning: script 'atd' missing LSB tags and overrides
insserv: warning: script 'procps' missing LSB tags and overrides
insserv: warning: script 'udevmonitor' missing LSB tags and overrides
insserv: warning: script 'gdm' missing LSB tags and overrides
insserv: warning: script 'hwclock' missing LSB tags and overrides
insserv: warning: script 'ufw' missing LSB tags and overrides
insserv: warning: current start runlevel(s) (0 6) of script `umountfs' overwrites defaults (empty).
insserv: warning: script 'udevtrigger' missing LSB tags and overrides
insserv: warning: script 'hwclock-save' missing LSB tags and overrides
insserv: warning: script 'network-manager' missing LSB tags and overrides
insserv: warning: current start runlevel(s) (0) of script `halt' overwrites defaults (empty).
insserv: warning: current start runlevel(s) (0 6) of script `umountnfs.sh' overwrites defaults (empty).
insserv: warning: script 'module-init-tools' missing LSB tags and overrides
insserv: warning: current start runlevel(s) (0 6) of script `sendsigs' overwrites defaults (empty).
insserv: warning: script 'rsyslog' missing LSB tags and overrides
insserv: warning: script 'apport' missing LSB tags and overrides
insserv: warning: script 'failsafe-x' missing LSB tags and overrides
insserv: warning: script 'usplash' missing LSB tags and overrides
insserv: warning: script 'hal' missing LSB tags and overrides
None of the pre-built vmmemctl modules for VMware Tools is suitable for your
running kernel. Do you want this program to try to build the vmmemctl module
for your system (you need to have a C compiler installed on your system)?
[yes]

Using compiler "/usr/bin/gcc". Use environment variable CC to override.

What is the location of the directory of C header files that match your running
kernel? [/lib/modules/2.6.31-20-generic/build/include]

Extracting the sources of the vmmemctl module.

Building the vmmemctl module.

Using 2.6.x kernel build system.
make:进入目录'/tmp/vmware-config0/vmmemctl-only'
make -C /lib/modules/2.6.31-20-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: 正在进入目录 `/usr/src/linux-headers-2.6.31-20-generic'
CC [M] /tmp/vmware-config0/vmmemctl-only/backdoorGcc32.o
In file included from /tmp/vmware-config0/vmmemctl-only/backdoor.h:29,
from /tmp/vmware-config0/vmmemctl-only/backdoorGcc32.c:45:
/tmp/vmware-config0/vmmemctl-only/vm_basic_types.h:108:7: warning: "__FreeBSD__" is not defined
CC [M] /tmp/vmware-config0/vmmemctl-only/os.o
In file included from /tmp/vmware-config0/vmmemctl-only/os.c:51:
/tmp/vmware-config0/vmmemctl-only/compat_wait.h:78: error: conflicting types for ‘poll_initwait’
include/linux/poll.h:70: note: previous declaration of ‘poll_initwait’ was here
make[2]: *** [/tmp/vmware-config0/vmmemctl-only/os.o] 错误 1
make[1]: *** [_module_/tmp/vmware-config0/vmmemctl-only] 错误 2
make[1]:正在离开目录 `/usr/src/linux-headers-2.6.31-20-generic'
make: *** [vmmemctl.ko] 错误 2
make:离开目录“/tmp/vmware-config0/vmmemctl-only”
Unable to build the vmmemctl module.

The memory manager driver (vmmemctl module) is used by VMware host software to
efficiently reclaim memory from a virtual machine.
If the driver is not available, VMware host software may instead need to swap
guest memory to disk, which may reduce performance.
The rest of the software provided by VMware Tools is designed to work
independently of this feature.
If you want the memory management feature, you can install the driver by
running vmware-config-tools.pl again after making sure that gcc, binutils, make
and the kernel sources for your running kernel are installed on your machine.
These packages are available on your distribution's installation CD.
[ Press Enter key to continue ]

None of the pre-built vmhgfs modules for VMware Tools is suitable for your
running kernel. Do you want this program to try to build the vmhgfs module for
your system (you need to have a C compiler installed on your system)? [yes]

Extracting the sources of the vmhgfs module.

Building the vmhgfs module.

Using 2.6.x kernel build system.
make:进入目录'/tmp/vmware-config1/vmhgfs-only'
make -C /lib/modules/2.6.31-20-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: 正在进入目录 `/usr/src/linux-headers-2.6.31-20-generic'
CC [M] /tmp/vmware-config1/vmhgfs-only/backdoor.o
In file included from /tmp/vmware-config1/vmhgfs-only/backdoor.h:29,
from /tmp/vmware-config1/vmhgfs-only/backdoor.c:40:
/tmp/vmware-config1/vmhgfs-only/vm_basic_types.h:108:7: warning: "__FreeBSD__" is not defined
CC [M] /tmp/vmware-config1/vmhgfs-only/backdoorGcc32.o
In file included from /tmp/vmware-config1/vmhgfs-only/backdoor.h:29,
from /tmp/vmware-config1/vmhgfs-only/backdoorGcc32.c:45:
/tmp/vmware-config1/vmhgfs-only/vm_basic_types.h:108:7: warning: "__FreeBSD__" is not defined
CC [M] /tmp/vmware-config1/vmhgfs-only/bdhandler.o
In file included from /tmp/vmware-config1/vmhgfs-only/rpcout.h:30,
from /tmp/vmware-config1/vmhgfs-only/hgfsBd.h:28,
from /tmp/vmware-config1/vmhgfs-only/bdhandler.c:45:
/tmp/vmware-config1/vmhgfs-only/vm_basic_types.h:108:7: warning: "__FreeBSD__" is not defined
In file included from /tmp/vmware-config1/vmhgfs-only/request.h:35,
from /tmp/vmware-config1/vmhgfs-only/bdhandler.c:50:
/tmp/vmware-config1/vmhgfs-only/compat_wait.h:78: error: conflicting types for ‘poll_initwait’
include/linux/poll.h:70: note: previous declaration of ‘poll_initwait’ was here
make[2]: *** [/tmp/vmware-config1/vmhgfs-only/bdhandler.o] 错误 1
make[1]: *** [_module_/tmp/vmware-config1/vmhgfs-only] 错误 2
make[1]:正在离开目录 `/usr/src/linux-headers-2.6.31-20-generic'
make: *** [vmhgfs.ko] 错误 2
make:离开目录“/tmp/vmware-config1/vmhgfs-only”
Unable to build the vmhgfs module.

The filesystem driver (vmhgfs module) is used only for the shared folder
feature. The rest of the software provided by VMware Tools is designed to work
independently of this feature.

If you wish to have the shared folders feature, you can install the driver by
running vmware-config-tools.pl again after making sure that gcc, binutils, make
and the kernel sources for your running kernel are installed on your machine.
These packages are available on your distribution's installation CD.
[ Press Enter key to continue ]

None of the pre-built vmxnet modules for VMware Tools is suitable for your
running kernel. Do you want this program to try to build the vmxnet module for
your system (you need to have a C compiler installed on your system)? [yes]

Extracting the sources of the vmxnet module.

Building the vmxnet module.

Using 2.6.x kernel build system.
make:进入目录'/tmp/vmware-config2/vmxnet-only'
make -C /lib/modules/2.6.31-20-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: 正在进入目录 `/usr/src/linux-headers-2.6.31-20-generic'
CC [M] /tmp/vmware-config2/vmxnet-only/vmxnet.o
In file included from /tmp/vmware-config2/vmxnet-only/vmxnet.c:48:
/tmp/vmware-config2/vmxnet-only/vm_basic_types.h:108:7: warning: "__FreeBSD__" is not defined
/tmp/vmware-config2/vmxnet-only/vmxnet.c: In function ‘vmxnet_change_mtu’:
/tmp/vmware-config2/vmxnet-only/vmxnet.c:193: error: ‘struct net_device’ has no member named ‘priv’
/tmp/vmware-config2/vmxnet-only/vmxnet.c: In function ‘vmxnet_get_drvinfo’:
/tmp/vmware-config2/vmxnet-only/vmxnet.c:267: error: ‘struct net_device’ has no member named ‘priv’
/tmp/vmware-config2/vmxnet-only/vmxnet.c: In function ‘vmxnet_set_tso’:
/tmp/vmware-config2/vmxnet-only/vmxnet.c:305: error: ‘struct net_device’ has no member named ‘priv’
/tmp/vmware-config2/vmxnet-only/vmxnet.c: In function ‘vmxnet_link_check’:
/tmp/vmware-config2/vmxnet-only/vmxnet.c:659: error: ‘struct net_device’ has no member named ‘priv’
/tmp/vmware-config2/vmxnet-only/vmxnet.c: In function ‘vmxnet_probe_device’:
/tmp/vmware-config2/vmxnet-only/vmxnet.c:841: error: ‘struct net_device’ has no member named ‘priv’
/tmp/vmware-config2/vmxnet-only/vmxnet.c:1058: error: ‘struct net_device’ has no member named ‘open’
/tmp/vmware-config2/vmxnet-only/vmxnet.c:1059: error: ‘struct net_device’ has no member named ‘hard_start_xmit’
/tmp/vmware-config2/vmxnet-only/vmxnet.c:1060: error: ‘struct net_device’ has no member named ‘stop’
/tmp/vmware-config2/vmxnet-only/vmxnet.c:1061: error: ‘struct net_device’ has no member named ‘get_stats’
/tmp/vmware-config2/vmxnet-only/vmxnet.c:1062: error: ‘struct net_device’ has no member named ‘set_multicast_list’
/tmp/vmware-config2/vmxnet-only/vmxnet.c:1064: error: ‘struct net_device’ has no member named ‘change_mtu’
/tmp/vmware-config2/vmxnet-only/vmxnet.c:1067: error: ‘struct net_device’ has no member named ‘tx_timeout’
/tmp/vmware-config2/vmxnet-only/vmxnet.c:1071: error: ‘struct net_device’ has no member named ‘poll_controller’
/tmp/vmware-config2/vmxnet-only/vmxnet.c:1075: error: ‘struct net_device’ has no member named ‘set_mac_address’
/tmp/vmware-config2/vmxnet-only/vmxnet.c: In function ‘vmxnet_remove_device’:
/tmp/vmware-config2/vmxnet-only/vmxnet.c:1142: error: ‘struct net_device’ has no member named ‘priv’
/tmp/vmware-config2/vmxnet-only/vmxnet.c: In function ‘vmxnet_init_ring’:
/tmp/vmware-config2/vmxnet-only/vmxnet.c:1213: error: ‘struct net_device’ has no member named ‘priv’
/tmp/vmware-config2/vmxnet-only/vmxnet.c: In function ‘vmxnet_open’:
/tmp/vmware-config2/vmxnet-only/vmxnet.c:1338: error: ‘struct net_device’ has no member named ‘priv’
/tmp/vmware-config2/vmxnet-only/vmxnet.c: In function ‘check_tx_queue’:
/tmp/vmware-config2/vmxnet-only/vmxnet.c:1594: error: ‘struct net_device’ has no member named ‘priv’
/tmp/vmware-config2/vmxnet-only/vmxnet.c: In function ‘vmxnet_tx’:
/tmp/vmware-config2/vmxnet-only/vmxnet.c:1658: error: ‘struct net_device’ has no member named ‘priv’
/tmp/vmware-config2/vmxnet-only/vmxnet.c: In function ‘vmxnet_rx’:
/tmp/vmware-config2/vmxnet-only/vmxnet.c:2057: error: ‘struct net_device’ has no member named ‘priv’
/tmp/vmware-config2/vmxnet-only/vmxnet.c: In function ‘vmxnet_interrupt’:
/tmp/vmware-config2/vmxnet-only/vmxnet.c:2232: error: ‘struct net_device’ has no member named ‘priv’
/tmp/vmware-config2/vmxnet-only/vmxnet.c: In function ‘vmxnet_close’:
/tmp/vmware-config2/vmxnet-only/vmxnet.c:2314: error: ‘struct net_device’ has no member named ‘priv’
/tmp/vmware-config2/vmxnet-only/vmxnet.c: In function ‘vmxnet_load_multicast’:
/tmp/vmware-config2/vmxnet-only/vmxnet.c:2404: error: ‘struct net_device’ has no member named ‘priv’
/tmp/vmware-config2/vmxnet-only/vmxnet.c: In function ‘vmxnet_set_multicast_list’:
/tmp/vmware-config2/vmxnet-only/vmxnet.c:2465: error: ‘struct net_device’ has no member named ‘priv’
/tmp/vmware-config2/vmxnet-only/vmxnet.c: In function ‘vmxnet_get_stats’:
/tmp/vmware-config2/vmxnet-only/vmxnet.c:2545: error: ‘struct net_device’ has no member named ‘priv’
make[2]: *** [/tmp/vmware-config2/vmxnet-only/vmxnet.o] 错误 1
make[1]: *** [_module_/tmp/vmware-config2/vmxnet-only] 错误 2
make[1]:正在离开目录 `/usr/src/linux-headers-2.6.31-20-generic'
make: *** [vmxnet.ko] 错误 2
make:离开目录“/tmp/vmware-config2/vmxnet-only”
Unable to build the vmxnet module.

The fast network device driver (vmxnet module) is used only for our fast
networking interface. The rest of the software provided by VMware Tools is
designed to work independently of this feature.
If you wish to have the fast network driver enabled, you can install the driver
by running vmware-config-tools.pl again after making sure that gcc, binutils,
make and the kernel sources for your running kernel are installed on your
machine. These packages are available on your distribution's installation CD.
[ Press Enter key to continue ]

None of the pre-built vmblock modules for VMware Tools is suitable for your
running kernel. Do you want this program to try to build the vmblock module
for your system (you need to have a C compiler installed on your system)?
[yes]

Extracting the sources of the vmblock module.

Building the vmblock module.

Using 2.6.x kernel build system.
make:进入目录'/tmp/vmware-config3/vmblock-only'
make -C /lib/modules/2.6.31-20-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: 正在进入目录 `/usr/src/linux-headers-2.6.31-20-generic'
CC [M] /tmp/vmware-config3/vmblock-only/linux/block.o
In file included from /tmp/vmware-config3/vmblock-only/linux/os.h:35,
from /tmp/vmware-config3/vmblock-only/linux/block.c:26:
/tmp/vmware-config3/vmblock-only/./include/compat_wait.h:78: error: conflicting types for ‘poll_initwait’
include/linux/poll.h:70: note: previous declaration of ‘poll_initwait’ was here
In file included from /tmp/vmware-config3/vmblock-only/linux/vmblockInt.h:40,
from /tmp/vmware-config3/vmblock-only/linux/block.c:29:
/tmp/vmware-config3/vmblock-only/./include/vm_basic_types.h:108:7: warning: "__FreeBSD__" is not defined
make[2]: *** [/tmp/vmware-config3/vmblock-only/linux/block.o] 错误 1
make[1]: *** [_module_/tmp/vmware-config3/vmblock-only] 错误 2
make[1]:正在离开目录 `/usr/src/linux-headers-2.6.31-20-generic'
make: *** [vmblock.ko] 错误 2
make:离开目录“/tmp/vmware-config3/vmblock-only”
Unable to build the vmblock module.

The vmblock module enables dragging or copying files from within a host and
dropping or pasting them onto your guest (host to guest drag and drop and file
copy/paste). The rest of the software provided by VMware Tools is designed to
work independently of this feature (including guest to host drag and drop and
file copy/paste).

If you would like the host to guest drag and drop and file copy/paste features,
you can install the driver by running vmware-config-tools.pl again after making
sure that gcc, binutils, make and the kernel sources for your running kernel
are installed on your machine. These packages are available on your
distribution's installation CD.
[ Press Enter key to continue ]

[EXPERIMENTAL] The VMware FileSystem Sync Driver (vmsync) is a new feature that
creates backups of virtual machines. Please refer to the VMware Knowledge Base
for more details on this capability. Do you wish to enable this feature?
[no]

None of the pre-built vmci modules for VMware Tools is suitable for your
running kernel. Do you want this program to try to build the vmci module for
your system (you need to have a C compiler installed on your system)? [yes]

Extracting the sources of the vmci module.

Building the vmci module.

Using 2.6.x kernel build system.
make:进入目录'/tmp/vmware-config4/vmci-only'
make -C /lib/modules/2.6.31-20-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: 正在进入目录 `/usr/src/linux-headers-2.6.31-20-generic'
CC [M] /tmp/vmware-config4/vmci-only/kernelStubsLinux.o
In file included from /tmp/vmware-config4/vmci-only/kernelStubs.h:35,
from /tmp/vmware-config4/vmci-only/kernelStubsLinux.c:28:
/tmp/vmware-config4/vmci-only/vm_basic_types.h:108:7: warning: "__FreeBSD__" is not defined
CC [M] /tmp/vmware-config4/vmci-only/vmciDatagram.o
In file included from /tmp/vmware-config4/vmci-only/vmciDatagram.c:42:
/tmp/vmware-config4/vmci-only/vm_basic_types.h:108:7: warning: "__FreeBSD__" is not defined
In file included from /tmp/vmware-config4/vmci-only/vmci_kernel_if.h:41,
from /tmp/vmware-config4/vmci-only/vmciDatagram.c:45:
/tmp/vmware-config4/vmci-only/compat_wait.h:78: error: conflicting types for ‘poll_initwait’
include/linux/poll.h:70: note: previous declaration of ‘poll_initwait’ was here
In file included from /tmp/vmware-config4/vmci-only/vmci_queue_pair.h:36,
from /tmp/vmware-config4/vmci-only/vmciGuestKernelAPI.h:43,
from /tmp/vmware-config4/vmci-only/vmciUtil.h:33,
from /tmp/vmware-config4/vmci-only/vmciDatagram.c:48:
/tmp/vmware-config4/vmci-only/vm_atomic.h:329:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config4/vmci-only/vm_atomic.h:333:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config4/vmci-only/vm_atomic.h:401:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config4/vmci-only/vm_atomic.h:407:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config4/vmci-only/vm_atomic.h:506:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config4/vmci-only/vm_atomic.h:595:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config4/vmci-only/vm_atomic.h:684:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config4/vmci-only/vm_atomic.h:773:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config4/vmci-only/vm_atomic.h:775:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config4/vmci-only/vm_atomic.h:860:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config4/vmci-only/vm_atomic.h:862:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config4/vmci-only/vm_atomic.h:945:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config4/vmci-only/vm_atomic.h:947:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config4/vmci-only/vm_atomic.h:1028:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config4/vmci-only/vm_atomic.h:1030:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config4/vmci-only/vm_atomic.h:1223:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config4/vmci-only/vm_atomic.h:1227:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config4/vmci-only/vm_atomic.h:1536:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config4/vmci-only/vm_atomic.h:1663:7: warning: "_MSC_VER" is not defined
make[2]: *** [/tmp/vmware-config4/vmci-only/vmciDatagram.o] 错误 1
make[1]: *** [_module_/tmp/vmware-config4/vmci-only] 错误 2
make[1]:正在离开目录 `/usr/src/linux-headers-2.6.31-20-generic'
make: *** [vmci.ko] 错误 2
make:离开目录“/tmp/vmware-config4/vmci-only”
Unable to build the vmci module.

The communication service is used in addition to the standard communication
between the guest and the host. The rest of the software provided by VMware
Tools is designed to work independently of this feature.
If you wish to have the VMCI feature, you can install the driver by running
vmware-config-tools.pl again after making sure that gcc, binutils, make and the
kernel sources for your running kernel are installed on your machine. These
packages are available on your distribution's installation CD.
[ Press Enter key to continue ]



Detected X.org version 7.5.4.



No drivers for X.org version: 7.5.4.

Skipping X configuration because X drivers are not included.

Checking acpi hot plug done
Starting VMware Tools services in the virtual machine:
Switching to guest configuration: done
Guest operating system daemon: done
Virtual Printing daemon: done

The configuration of VMware Tools 7.8.5 build-156735 for Linux for this running
kernel completed successfully.

You must restart your X session before any mouse or graphics changes take
effect.

You can now run VMware Tools by invoking the following command:
"/usr/bin/vmware-toolbox" during an X server session.

To enable advanced X features (e.g., guest resolution fit, drag and drop, and
file and text copy/paste), you will need to do one (or more) of the following:
1. Manually start /usr/bin/vmware-user
2. Log out and log back into your desktop session; and,
3. Restart your X session.

If the virtual printer feature is enabled, you will need to restart the CUPS
service to make use of this feature.

Enjoy,

--the VMware team

wenlz@wenlz-desktop:/usr/bin$

请高手们看看是什么问题？该如何时解决。
谢谢了

[wangdu2002]

这个不会。。。建议换开源的Vbox。
http://www.virtualbox.org/wiki/Download ... ox各种版本下载地址

[wenlz]

顶上去，我就不相信没人知道

[rediscover]

用vbox吧，vm的没啥意思。

[hanbso]

和楼主一样的问题，没人知道为什么么？