当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 7 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : win7安装双系统的问题
帖子发表于 : 2011-01-26 19:27 

注册: 2010-01-05 12:06
帖子: 6
送出感谢: 0 次
接收感谢: 0 次
win7硬盘安装ubuntu后,ubuntu能够正常启动,但是没有启动的选项(开机直接跳到ubuntu的界面)。。试过update-grub也没有用,知道怎么回事的就帮个忙吧。。


页首
 用户资料  
 
2 楼 
 文章标题 : Re: win7安装双系统的问题
帖子发表于 : 2011-01-26 20:14 
头像

注册: 2009-09-06 5:53
帖子: 4666
送出感谢: 6
接收感谢: 110
在浏览器里 ctrl-c 是复制,在终端里 ctrl-shift-v 是粘帖

终端运行:
代码:
 cd ~/桌面 && wget 'http://nchc.dl.sourceforge.net/project/bootinfoscript/bootinfoscript/0.55/boot_info_script055.sh' && sudo bash boot_info_script055.sh


把RESULTS.txt文件内容贴上来。


_________________
电子书下载:
鸟哥的Linux私房菜 基础学习篇 第三版 pdf
鸟哥的Linux私房菜 服务器架设篇 第三版 pdf


页首
 用户资料  
 
3 楼 
 文章标题 : Re: win7安装双系统的问题
帖子发表于 : 2011-01-26 20:35 

注册: 2010-01-05 12:06
帖子: 6
送出感谢: 0 次
接收感谢: 0 次
onshoestring 写道:
在浏览器里 ctrl-c 是复制,在终端里 ctrl-shift-v 是粘帖

终端运行:
代码:
 cd ~/桌面 && wget 'http://nchc.dl.sourceforge.net/project/bootinfoscript/bootinfoscript/0.55/boot_info_script055.sh' && sudo bash boot_info_script055.sh


把RESULTS.txt文件内容贴上来。


代码:
                Boot Info Script 0.55    dated February 15th, 2010                   

============================= Boot Info Summary: ==============================

 => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
    partition #6 for (,msdos6)/boot/grub.

sda1: _________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista/7
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows 7
    Boot files/dirs:   /bootmgr /Boot/BCD /Windows/System32/winload.exe

sda2: _________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sda5: _________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista/7
    Boot sector info:  According to the info in the boot sector, sda5 starts
                       at sector 63.
    Operating System: 
    Boot files/dirs:   

sda6: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 10.10
    Boot files/dirs:   /boot/grub/menu.lst /boot/grub/grub.cfg /etc/fstab
                       /boot/grub/core.img

sda7: _________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows XP
    Boot sector info:  According to the info in the boot sector, sda7 starts
                       at sector 63.
    Operating System: 
    Boot files/dirs:   /grldr

sda8: _________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

=========================== Drive/Partition Info: =============================

Drive: sda ___________________ _____________________________________________________

Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot         Start           End          Size  Id System

/dev/sda1    *             63   104,679,539   104,679,477   7 HPFS/NTFS
/dev/sda2         104,679,601   312,576,704   207,897,104   f W95 Ext d (LBA)
/dev/sda5         104,679,603   218,204,864   113,525,262   7 HPFS/NTFS
/dev/sda6         218,206,208   239,177,727    20,971,520  83 Linux
/dev/sda7         243,370,752   312,576,704    69,205,953   7 HPFS/NTFS
/dev/sda8         239,191,848   243,368,684     4,176,837  82 Linux swap / Solaris


blkid -c /dev/null: ____________________________________________________________

Device           UUID                                   TYPE       LABEL                         

/dev/sda1        32606FC2606F8C03                       ntfs                                     
/dev/sda2: PTTYPE="dos"
/dev/sda5        18C66940C6691F6E                       ntfs                                     
/dev/sda6        c359b087-8987-4167-84a7-a57fafeec142   ext4                                     
/dev/sda7        A210FC3810FC14CF                       ntfs                                     
/dev/sda8        b625ff81-5d04-4594-8152-b8347a64d41f   swap                                     
/dev/sda: PTTYPE="dos"

============================ "mount | grep ^/dev  output: ===========================

Device           Mount_Point              Type       Options

/dev/sda6        /                        ext4       (rw,errors=remount-ro,commit=0)
/dev/sda1        /media/32606FC2606F8C03  fuseblk    (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions)


=================== sda1: Location of files loaded by Grub: ===================


    ??GB: initrd.lz

=========================== sda6/boot/grub/menu.lst: ===========================

# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-legacy-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default      0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout      3

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title      Windows 95/98/NT/2000
# root      (hd0,0)
# makeactive
# chainloader   +1
#
# title      Linux
# root      (hd0,1)
# kernel   /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=c359b087-8987-4167-84a7-a57fafeec142 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=c359b087-8987-4167-84a7-a57fafeec142

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
##      indomU=true
##      indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title      Ubuntu 10.10, kernel 2.6.35-22-generic
uuid      c359b087-8987-4167-84a7-a57fafeec142
kernel      /boot/vmlinuz-2.6.35-22-generic root=UUID=c359b087-8987-4167-84a7-a57fafeec142 ro quiet splash
initrd      /boot/initrd.img-2.6.35-22-generic

title      Ubuntu 10.10, kernel 2.6.35-22-generic (recovery mode)
uuid      c359b087-8987-4167-84a7-a57fafeec142
kernel      /boot/vmlinuz-2.6.35-22-generic root=UUID=c359b087-8987-4167-84a7-a57fafeec142 ro  single
initrd      /boot/initrd.img-2.6.35-22-generic

title      Chainload into GRUB 2
root      c359b087-8987-4167-84a7-a57fafeec142
kernel      /boot/grub/core.img

title      Ubuntu 10.10, memtest86+
uuid      c359b087-8987-4167-84a7-a57fafeec142
kernel      /boot/memtest86+.bin

### END DEBIAN AUTOMAGIC KERNELS LIST

=========================== sda6/boot/grub/grub.cfg: ===========================

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  insmod vbe
  insmod vga
}

insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set c359b087-8987-4167-84a7-a57fafeec142
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=640x480
  load_video
  insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set c359b087-8987-4167-84a7-a57fafeec142
set locale_dir=($root)/boot/grub/locale
set lang=zh
insmod gettext
if [ "${recordfail}" = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.35-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
   recordfail
   insmod part_msdos
   insmod ext2
   set root='(hd0,msdos6)'
   search --no-floppy --fs-uuid --set c359b087-8987-4167-84a7-a57fafeec142
   linux   /boot/vmlinuz-2.6.35-22-generic root=UUID=c359b087-8987-4167-84a7-a57fafeec142 ro   quiet splash
   initrd   /boot/initrd.img-2.6.35-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.35-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
   recordfail
   insmod part_msdos
   insmod ext2
   set root='(hd0,msdos6)'
   search --no-floppy --fs-uuid --set c359b087-8987-4167-84a7-a57fafeec142
   echo   'Loading Linux 2.6.35-22-generic ...'
   linux   /boot/vmlinuz-2.6.35-22-generic root=UUID=c359b087-8987-4167-84a7-a57fafeec142 ro single
   echo   'Loading initial ramdisk ...'
   initrd   /boot/initrd.img-2.6.35-22-generic
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
   insmod part_msdos
   insmod ext2
   set root='(hd0,msdos6)'
   search --no-floppy --fs-uuid --set c359b087-8987-4167-84a7-a57fafeec142
   linux16   /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
   insmod part_msdos
   insmod ext2
   set root='(hd0,msdos6)'
   search --no-floppy --fs-uuid --set c359b087-8987-4167-84a7-a57fafeec142
   linux16   /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
  if keystatus; then
    if keystatus --shift; then
      set timeout=-1
    else
      set timeout=0
    fi
  else
    if sleep --interruptible 3 ; then
      set timeout=0
    fi
  fi
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###

=============================== sda6/etc/fstab: ===============================

# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    nodev,noexec,nosuid 0       0
# / was on /dev/sda6 during installation
UUID=c359b087-8987-4167-84a7-a57fafeec142 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda8 during installation
UUID=b625ff81-5d04-4594-8152-b8347a64d41f none            swap    sw              0       0

=================== sda6: Location of files loaded by Grub: ===================


 120.6GB: boot/grub/core.img
 120.5GB: boot/grub/grub.cfg
 120.7GB: boot/grub/menu.lst
 112.9GB: boot/initrd.img-2.6.35-22-generic
 120.6GB: boot/vmlinuz-2.6.35-22-generic
 112.9GB: initrd.img
 120.6GB: vmlinuz


页首
 用户资料  
 
4 楼 
 文章标题 : Re: win7安装双系统的问题
帖子发表于 : 2011-01-26 22:02 

注册: 2010-01-05 12:06
帖子: 6
送出感谢: 0 次
接收感谢: 0 次
代码:
                Boot Info Script 0.55    dated February 15th, 2010                   

============================= Boot Info Summary: ==============================

 => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
    partition #6 for (,msdos6)/boot/grub.

sda1: _________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista/7
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows 7
    Boot files/dirs:   /bootmgr /Boot/BCD /Windows/System32/winload.exe

sda2: _________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sda5: _________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista/7
    Boot sector info:  According to the info in the boot sector, sda5 starts
                       at sector 63.
    Operating System: 
    Boot files/dirs:   

sda6: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 10.10
    Boot files/dirs:   /boot/grub/menu.lst /boot/grub/grub.cfg /etc/fstab
                       /boot/grub/core.img

sda7: _________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows XP
    Boot sector info:  According to the info in the boot sector, sda7 starts
                       at sector 63.
    Operating System: 
    Boot files/dirs:   /grldr

sda8: _________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

=========================== Drive/Partition Info: =============================

Drive: sda ___________________ _____________________________________________________

Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot         Start           End          Size  Id System

/dev/sda1    *             63   104,679,539   104,679,477   7 HPFS/NTFS
/dev/sda2         104,679,601   312,576,704   207,897,104   f W95 Ext d (LBA)
/dev/sda5         104,679,603   218,204,864   113,525,262   7 HPFS/NTFS
/dev/sda6         218,206,208   239,177,727    20,971,520  83 Linux
/dev/sda7         243,370,752   312,576,704    69,205,953   7 HPFS/NTFS
/dev/sda8         239,191,848   243,368,684     4,176,837  82 Linux swap / Solaris


blkid -c /dev/null: ____________________________________________________________

Device           UUID                                   TYPE       LABEL                         

/dev/sda1        32606FC2606F8C03                       ntfs                                     
/dev/sda2: PTTYPE="dos"
/dev/sda5        18C66940C6691F6E                       ntfs                                     
/dev/sda6        c359b087-8987-4167-84a7-a57fafeec142   ext4                                     
/dev/sda7        A210FC3810FC14CF                       ntfs                                     
/dev/sda8        b625ff81-5d04-4594-8152-b8347a64d41f   swap                                     
/dev/sda: PTTYPE="dos"

============================ "mount | grep ^/dev  output: ===========================

Device           Mount_Point              Type       Options

/dev/sda6        /                        ext4       (rw,errors=remount-ro,commit=0)
/dev/sda1        /media/32606FC2606F8C03  fuseblk    (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions)


=================== sda1: Location of files loaded by Grub: ===================


    ??GB: initrd.lz

=========================== sda6/boot/grub/menu.lst: ===========================

# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-legacy-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default      0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout      3

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title      Windows 95/98/NT/2000
# root      (hd0,0)
# makeactive
# chainloader   +1
#
# title      Linux
# root      (hd0,1)
# kernel   /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=c359b087-8987-4167-84a7-a57fafeec142 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=c359b087-8987-4167-84a7-a57fafeec142

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
##      indomU=true
##      indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title      Ubuntu 10.10, kernel 2.6.35-22-generic
uuid      c359b087-8987-4167-84a7-a57fafeec142
kernel      /boot/vmlinuz-2.6.35-22-generic root=UUID=c359b087-8987-4167-84a7-a57fafeec142 ro quiet splash
initrd      /boot/initrd.img-2.6.35-22-generic

title      Ubuntu 10.10, kernel 2.6.35-22-generic (recovery mode)
uuid      c359b087-8987-4167-84a7-a57fafeec142
kernel      /boot/vmlinuz-2.6.35-22-generic root=UUID=c359b087-8987-4167-84a7-a57fafeec142 ro  single
initrd      /boot/initrd.img-2.6.35-22-generic

title      Chainload into GRUB 2
root      c359b087-8987-4167-84a7-a57fafeec142
kernel      /boot/grub/core.img

title      Ubuntu 10.10, memtest86+
uuid      c359b087-8987-4167-84a7-a57fafeec142
kernel      /boot/memtest86+.bin

### END DEBIAN AUTOMAGIC KERNELS LIST

=========================== sda6/boot/grub/grub.cfg: ===========================

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  insmod vbe
  insmod vga
}

insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set c359b087-8987-4167-84a7-a57fafeec142
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=640x480
  load_video
  insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set c359b087-8987-4167-84a7-a57fafeec142
set locale_dir=($root)/boot/grub/locale
set lang=zh
insmod gettext
if [ "${recordfail}" = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.35-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
   recordfail
   insmod part_msdos
   insmod ext2
   set root='(hd0,msdos6)'
   search --no-floppy --fs-uuid --set c359b087-8987-4167-84a7-a57fafeec142
   linux   /boot/vmlinuz-2.6.35-22-generic root=UUID=c359b087-8987-4167-84a7-a57fafeec142 ro   quiet splash
   initrd   /boot/initrd.img-2.6.35-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.35-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
   recordfail
   insmod part_msdos
   insmod ext2
   set root='(hd0,msdos6)'
   search --no-floppy --fs-uuid --set c359b087-8987-4167-84a7-a57fafeec142
   echo   'Loading Linux 2.6.35-22-generic ...'
   linux   /boot/vmlinuz-2.6.35-22-generic root=UUID=c359b087-8987-4167-84a7-a57fafeec142 ro single
   echo   'Loading initial ramdisk ...'
   initrd   /boot/initrd.img-2.6.35-22-generic
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
   insmod part_msdos
   insmod ext2
   set root='(hd0,msdos6)'
   search --no-floppy --fs-uuid --set c359b087-8987-4167-84a7-a57fafeec142
   linux16   /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
   insmod part_msdos
   insmod ext2
   set root='(hd0,msdos6)'
   search --no-floppy --fs-uuid --set c359b087-8987-4167-84a7-a57fafeec142
   linux16   /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
  if keystatus; then
    if keystatus --shift; then
      set timeout=-1
    else
      set timeout=0
    fi
  else
    if sleep --interruptible 3 ; then
      set timeout=0
    fi
  fi
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###

=============================== sda6/etc/fstab: ===============================

# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    nodev,noexec,nosuid 0       0
# / was on /dev/sda6 during installation
UUID=c359b087-8987-4167-84a7-a57fafeec142 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda8 during installation
UUID=b625ff81-5d04-4594-8152-b8347a64d41f none            swap    sw              0       0

=================== sda6: Location of files loaded by Grub: ===================


 120.6GB: boot/grub/core.img
 120.5GB: boot/grub/grub.cfg
 120.7GB: boot/grub/menu.lst
 112.9GB: boot/initrd.img-2.6.35-22-generic
 120.6GB: boot/vmlinuz-2.6.35-22-generic
 112.9GB: initrd.img
 120.6GB: vmlinuz



页首
 用户资料  
 
5 楼 
 文章标题 : Re: win7安装双系统的问题
帖子发表于 : 2011-01-26 22:58 
头像

注册: 2009-09-06 5:53
帖子: 4666
送出感谢: 6
接收感谢: 110
menu.lst是grub1的文件,grub.cfg是grub2的文件不知道为什么都有。
把grub1,grub2全部删除,重新安装grub2。

代码:
sudo apt-get purge grub
sudo apt-get purge grub-pc grub-common
sudo rm -fr /boot/grub/*
sudo apt-get install grub-pc grub-common
sudo grub-install /dev/sda
sudo update-grub


_________________
电子书下载:
鸟哥的Linux私房菜 基础学习篇 第三版 pdf
鸟哥的Linux私房菜 服务器架设篇 第三版 pdf


页首
 用户资料  
 
6 楼 
 文章标题 : Re: win7安装双系统的问题
帖子发表于 : 2011-01-27 0:17 

注册: 2010-01-05 12:06
帖子: 6
送出感谢: 0 次
接收感谢: 0 次
还厉害,可以了。。。太感谢了


页首
 用户资料  
 
7 楼 
 文章标题 : Re: win7安装双系统的问题
帖子发表于 : 2011-01-27 15:24 

注册: 2009-11-06 1:28
帖子: 9
送出感谢: 0 次
接收感谢: 0 次
上面挺复杂的嘛。
我以前是先装WIN7,然后再装ubuntu。这样装好以后就有选项了。


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 7 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 2 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译