当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 4 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : 弱弱的问题, 利用新版nvidia logopatch DIY自己的 nvidia logo
帖子发表于 : 2007-01-03 1:12 
头像

注册: 2006-12-23 13:46
帖子: 9203
地址: Azores Islands
送出感谢: 0 次
接收感谢: 1
wiki上只有关于如何关闭nvidia logo的设定,但没有更改它的说明。
最近为了安装beryl,升级了nvidia驱动,看了一下它的说明:发现新版驱动里增加了logo的configur项,我对红色部份的理解是用户可以通过 X configuration 的选项来diy logo.但不知道如何diy logo , nvidia-xconfig里面并没有增加这个选项




* Added initial support for GLX_EXT_texture_from_pixmap.

* Added new "Display Configuration" page in nvidia-settings.

* Improved workstation OpenGL performance in Xinerama.

* Added support for NVIDIA Quadro Plex.

* Added support for Quad SLI.

* Improved X driver error recovery.

* Improved workstation overlay performance.

* Added SMBus functionality to the Linux/i2c interface.

* Fixed DFP scaling support.

* Added support for OpenGL 2.1.

* Added new "TwinViewXineramaInfoOrder" X configuration option to
control the order of display devices when in TwinView.

* Fixed some problems related to TV Out.

* Added new NVIDIA logo artwork to nvidia-settings and X driver
splashscreen; the X driver splashscreen can now be configured
with the new "LogoPath" X configuration option
.

2006-10-19 version 1.0-8776

* Fixed Security Advisory R7-0025.

2006-08-24 version 1.0-8774

* Added support for X.Org 7.1.

* Added support for XVideo with the Composite X extension when
using X.Org 7.1.

* Improved interaction with newer Linux kernels.

2006-05-22 version 1.0-8762

* Added support for new GPUs, such as QuadroFX 4500 X2, Quadro FX
5500, Quadro FX 3500, and Quadro FX 1500.

* Improved Quadro FX 3450/4000 SDI support.

* Fixed video memory reporting with GeForce 6200 Turbo Cache.

* Fixed a problem with Overlay support when in TwinView.

* Fixed problems starting X with SLI Frame Rendering on nForce 4
SLI Intel Edition.

* Fixed multiple issues with combinations of Stereo, SLI,
FrameRendering and G-Sync.

* Fixed several issues with mode selection for CRTs and DFPs.

* Fixed a corruption problem with Rotation and large desktops on
older GPUs, including GeForce4 MX.

* Fixed a system crash starting X with TwinView on certain GPUs.

* Addressed an NV-CONTROL compatibility issue; please see the Known
Issues section of the README for details.

2006-04-07 version 1.0-8756

* Added support for GeForce 7300, GeForce 7400, GeForce 7600 and
GeForce 7900.

* Added support for running OpenGL applications while the
Composite X extension is enabled; see "The X Composite Extension"
appendix for details.

* Enabled hardware acceleration of the Render X extension by default.

* Added "AddARGBGLXVisuals" X configuration option, so that OpenGL
applications can render to X Windows' alpha channel.

* Added Linux/i2c support to the NVIDIA kernel module; see the "i2c
Bus Support" appendix for details.

* Improved power management support with Linux >= 2.6.14 and
added support for suspend-to-disk.

* Added new "nvidia-auto-select" mode entry for use in the X
configuration file; see description in the "Programming Modes"
appendix.

* Added support for GLX 1.4.

* Added ability for OpenGL applications to span greater than
4096 pixels when in Xinerama.

* Improved G-Sync support.

* Fixed interlaced modes on CRTs.

* Improved compatibility with the latest Linux 2.6 kernels.

2005-12-22 version 1.0-8178

* Fixed a problem where certain precompiled kernel interfaces were
not recognized.

* Improved stability with the Composite X extension.

* Fixed a corruption bug with RenderAccel and the Composite X
extension when using wide desktops.

* Fixed a problem validating HDTV modes on GeForce 6200.

* Fixed detection of certain older TV encoders.

* Fixed installation problems with Linux kernel source trees
using separate KBUILD output directories.

* Fixed installation problems on newer Debian systems.

2005-12-05 version 1.0-8174

* Added support for SLI FrameRendering. Please see the README
for details.

* Added support for new GPUs such as the GeForce 6100 and GeForce 6150.

* Added a new utility 'nvidia-xconfig', which is a commandline
tool for updating X configuration files.

* Added manpages for 'nvidia-xconfig', 'nvidia-settings', and
'nvidia-installer'.

* Improved workstation OpenGL performance on Solaris.

* Made UseEdidFreqs "on" by default; the NVIDIA X driver will
use the valid HorizSync and VertRefresh frequency ranges from the
EDID whenever possible.

* Added support for Stereo Digital Flat Panels such as the SeeReal
and Sharp3D DFPs.

* Added HTML version of the README.

* Added support for static Rotation; see the "Rotate" X config option
in the README.

* Improved stability on 64-bit Linux 2.6 kernels.

* Fixed driver installation when SELinux is enabled.

2005-08-02 version 1.0-7676

* Improved GeForce 7800 GTX performance.

2005-06-22 version 1.0-7667

* Added support for GeForce 7800 GTX.

* Fixed problem with certain flatpanels running at 1600x1200.

* Fixed an unresolved symbol issue in libXvMCNVIDIA.so.

* Fixed an unresolved reference to the symbol "gnu_dev_makedev".

* Worked around a bug in Java2D that was exposed in 1.0-7664.

* Improved support for Quadro FX 4000 SDI.

2005-06-01 version 1.0-7664

* Install NVIDIA OpenGL headers by default.

* Fixed performance problem when using AGPGART.

* Fixed support for GeForce2 Integrated GPUs.

* Fixed a workstation graphics stability problem.

* Improved XRandR rotation support.

* Fixed installation problems on some Linux 2.6 kernels.

2005-03-11 version 1.0-7167

* Improved OpenGL workstation performance.

* Added support for XRandR rotation; see Appendix W in the text README.

* Added ExactModeTimingsDVI X config option to give explicit control
over the mode timings used on FlatPanels.

* Added Xorg dlloader support.

* Changed driver behavior such that PAT (Page Attribute Table)
is used where possible instead of MTRRs.

* Added a workaround for an X server bug with PCI-E GeForce 6800
and GeForce 6600; a fix has been provided to XFree86 and XOrg.

* Fixed stability problems on x86_64 PCI-E systems.

* Documented change_page_attr problems with x86_64 2.6 kernels;
please see the known issue "The X86-64 platform (AMD64/EM64T)
and 2.6 kernels" in the text README here:

/usr/share/doc/NVIDIA_GLX-1.0/README

* Fixed 2D rendering corruption on certain older GPUs.

* Improved compatibility with Linux 2.6 kernels.

* Fixed compatibility problems with some SWIOTLB em64t systems.

* Fixed a bug that triggered error messages of the form:

"ioctl32(doom.x86:6747): Unknown cmd fd(16) cmd(c0384642){00}
arg(ffffc75c) on /dev/nvidiactl"

* Fixed NvAGP incompatibility with recent Linux 2.6 kernels.

* Improved interaction with the udev filesystem.

* Improved performance of PCI cards on Linux 2.6 systems.

* Support for TurboCache GPUs.

2004-11-5 version 1.0-6629

* Added support for GeForce 6600 and GeForce 6600 GT.

* Added support for Quadro FX 4000 SDI

* Added support for 512 MB framebuffers.

* Improved support for GLSL (OpenGL Shading Language).

* Improved performance for VBO (OpenGL Vertex Buffer Objects).

* Improved support for Linux 2.6 kernels.

* Improved support for PCI Express.

* Reduced virtual address space consumption in OpenGL applications.

* Updated documentation. Please see the file

/usr/share/doc/NVIDIA_GLX-1.0/README

There are new known issues on EM64T and multithreaded
application stability as well as new appendices:

(app-s) APPENDIX S: POWER MANAGEMENT SUPPORT
(app-t) APPENDIX T: DISPLAY DEVICE NAMES
(app-u) APPENDIX U: THE COMPOSITE X EXTENSION

* Improved support for EM64T Linux/x86-64 systems

* Improved support for RenderAccell

* Improved performance for Java2D.

2004-8-5 version 1.0-6111

* Fixed SoftImage certification issues.

* Made the the "Do you really want to quit?" dialog in nvidia-settings
optional (via the nvidia-settings Configuration page).

* Fixed problem that prevented multiple simultaneous X servers
from running on TNT/TNT2.

* Fixed problem that caused TV-Out modes other than 640x480 and
800x600 to be unavailable.

* Fixed problem that caused cursor misplacement/corruption in
certain TwinView configurations.

* Fixed problem that caused some AGP kernel module options to
be ignored.

* Fixed problem in GLSL with shadow2DProj.

* Fixed console restore problems on GeForce4 Ti.

2004-6-30 version 1.0-6106

* Added support for GLSL (OpenGL Shading Language).

* Added support for GL_EXT_pixel_buffer_object.

* Added support for 4kstack kernels.

* Added configuration utility "nvidia-settings"; see the user guide
installed here:

/usr/share/doc/NVIDIA_GLX-1.0/nvidia-settings-user-guide.txt

for details.

* Added support for running 32bit OpenGL applications on 64bit AMD64
Linux installations.

* Fixed problem that prevented 32bit kernel driver from running on
certain AMD64 CPUs.

* Added a new Xv adaptor on GeForce4 and GeForceFX which uses the
3D engine to do Xv PutImage requests. This allows XvMC to operate
when the video overlay is not available (such as in TwinView).
XvMC still uses the overlay by default, when available. A new
XF86Config option "XvmcUsesTextures" has been added to force
usage of the 3D engine for XvMCPutSurface even when overlays are
available.

* Added a shell script "nvidia-bug-report.sh" that gathers
system configuration information into a log file; the resulting
log file (nvidia-bug-report.log) should be included when reporting
bugs to NVIDIA.

2004-1-26 version 1.0-5336

* Added support for Linux 2.6 kernels.

* Fixed a problem that caused kernels oops, black screens, and agp
failures on some VIA motherboards.

* Fixed a typo in the NVIDIA-provided libGL.la.

* Fixed a problem that prevented X from running on Samsung X10 laptops.

* Deprecated the "--kernel-include-path" .run commandline option,
in favor of "--kernel-source-path".

2003-12-22 version 1.0-5328

* Added support for UBB and FSAA Stereo.

* Improved GLXPixamp support.

* Added support for Red Hat Advanced Workstation 3.0.

* Added support for GLX_SGI_swap_control.

* Added an OS ABI ELF Note to the OpenGL libraries.

* Fix a problem where the video overlay would sometimes stop working
when displaying HDTV resolutions.

* For graphics cards that require a power connector but do not have
a connector plugged in, fail X screen initialization, rather than
just print a warning message.

* Reduced CPU usage when OpenGL applications are syncing to vblank.

2003-7-28 version 1.0-4496

* Improved OpenGL performance when rendering to multiple
buffers (such as when using a stereo visual and rendering to
GL_LEFT_AND_RIGHT).

* Initial support for APM power management.

* Fixed some RENDER related corruption reported with GTK+ 2.2.2.

* Added support for Active Stereo + TwinView.

* Fixed a hang on GeForce2 that occurred when using RENDER extension
acceleration on some apps such as OpenOffice.

2003-4-24 version 1.0-4363

* Fixed a problem that prevented running multiple X servers on
different virtual terminals.

* Improved IDCT level acceleration in XvMC.

* Fixed a 2D performance slowdown experienced by many people.

2002-12-11 version 1.0-4191

* Added support for FSAA with UBB.

* Support for OpenGL 1.4

* Finished GLX 1.3 support

* Support for AGP 3.0

* Improved support for NForce2

* Added support for NV30 and NV30 extensions.

* Fixed bug where there was corruption at the borders of a pbuffer

* More complete acceleration for the XRENDER extension. Due to the
experimental nature, RENDER acceleration is now disabled by default
(Option "RenderAccel" enables it).

* The driver no longer uses the XFree86 Acceleration Architecture (XAA),
but provides its own 2D acceleration architecture to better accomodate
the needs of simultaneous 3D and 2D rendering.

* Added color index overlay emulation on Quadro4.

* Added support for separate X screens on a single GPU (supported
by all GPUs that support TwinView).

2002-9-10 version 1.0-3123

* Added support for NV18, NV28 and nForce 2.

* Added Quadbuffered workstation stereo visuals for Quadro2, 4 and
Quadro DCC.

* Improved Viewperf numbers.

* Added support for up to 16 monitors.

* Added support for T221 panel.

* Added support for RGB OpenGL overlays in TwinView on NV25/28.

* Added support for hardware clip ids on Quadro4 parts. Option "UseClipIDs"
enables them.

2002-5-23 version 1.0-2960

* Fixed problem with loading the GLX extension in multi-head
environments with non-NVIDIA video cards.

* Significant performance improvements in Viewperf on Quadro parts.

* Added option "NoRenderExtension" to disable the RENDER extension.
This is useful in 8bpp where the RENDER extension will preallocate
a large portion of the default colormap and break many legacy
applications.

* Fixed a regression where I420 XvImages had the chroma planes swapped.

* Fixed some problems with moving overlay windows.

* Added a dynamic XvMC library "libXvMCNVIDIA_dynamic.so" so that
applications can dynamically load the vendor-specific core XvMC
support.

* Added XvMC motion-compensation acceleration for NV25 and fixed
some bugs in the NV17 XvMC support.

* Fixed some problems with FSAA modes failing.

2002-4-3 version 1.0-2880

* Fixed rendering problems which occurred in some cases when
GL_SYNC_TO_VBLANK was enabled.

* Fixed problem where the maximum pixel clock was set too low.

* Fixed a problem with image flicker when running full-screen apps
on GeForce4.

* Fixed a pixmap cache corruption problem on GeForce3.

* Fixed some issues running multiple NVIDIA graphics cards simultaneously.

2002-3-7 version 1.0-2802

* Support for anisotropic filtering.

* Provide libXvMCNVIDIA.a which is an implementation of XvMC 1.0.
This allows mpeg acceleration on NV17 chips and NV17 chips only.

* RGB Workstation overlays for Quadro4. These are double buffered,
Z-buffered 16 bit visuals. The transparency key is 0x0000 hex.

* NV17 and NV25 support.

* Added an 8:8:8:8 XRGB XvImage format to the video blitter.

* Config file option for Digital Vibrance Control.

* Added new XF86Config option "FlatPanelProperties" to control dithering
and scaling when X is started.

* Added support for SoftEDID's. When enabled the driver will generate
an EDID based on the video bios isntead of doing a table lookup.

* Improved Crush support

* Fixed problem with using SGIX_fbconfig and SGIX_pbuffer with
indirect rendering (protocol was incorrect)

* Fixed problem where the driver would fail on systems with >= 1GB
of memory and a kernel configured to use all the memory.

2001-11-26 version 1.0-2313

* Got Crush working.

* OpenGL 1.3 support.

* Added SGIX_pbuffer and SGIX_fbconfig extensions.

* Added UBB support, pageflipping and window flipping (described in
README).

* Improved Viewperf performance, Quake performance and performance
of immediate mode applications.

* Improved stability on AMD platforms.

* Fixed TwinView problem that caused garbage to appear on the screen
when starting X with a null option on head 0.

* Added workaround for XAA bug that causes system to hang when Lisa
Screensaver is run. The problem is worked around by adding the
following line in the "Device" section of the XF86Config file:
'Option "XaaNoSolidFillTrap"'. This option prevents XAA from
breaking wide lines (and polyggons) into trapezoids and avoids an
XAA clipping bug.

* Fixed a system hang that occured on some chipsets when taking the
X server down (after having run once successfully) and restarting
it while using the DVI-I connected toa flat panel.

* Fixed problem where the performer application Perfly would hang
when run in forked-draw mode.

* Fixed problem where the X driver would segfault when given an
invalid MetaMode.

* Fixed problem where the console was not restored properly after
entering X and returning to the console.

* Fixed problem where X did not redraw completely after a screen
blank on GForce 2 Go and Quadro 2 Go.

* Fixed problem with initializing secondary card. In most cases, the
secondary card is posted correctly. In the cases where it isn't,
there is now a workaround to initialize the card via X.

* Added workarounds to enable AGP on ALI chipsets and enable 4X AGP
on VIA chipsets (See README and use with caution!).

2001-08-20 version 1.0-1541

* Changed behaviour of the X server so the NVIDIA splash screen will
only show up on the first run of X. This can also be disabled by
setting an option in XF86Config (see README).

* Fixed problem where OpenGL applications would sometimes leave
portions of their rendering behind when the window was closed
using the kill button on the window banner.

* Fixed problem on mobile where X would respond to the wrong hotkey
event under some conditions.

* Fixed several more problems with indirect rendering.

* Fixed problem on SMP machines which occured when VT switching
while running gloss and gears indirect.

* Fixed problem where /proc/nv/card0 did not report nv20 correctly.

* Fixed problem on TNT2, where the driver would only support up to 4
threads per process.

* Fixed Xserver crash that occured when running two Xservers with
AGPgart.

* Fixed some problems in GLX that occured when running
multi-threaded applications.

2001-07-05 version 1.0-1420

* Added support for hotkey switching on mobile platforms.

* Fixed a hang on mobile that occurred after starting X, killing it
and restarting.

* Fixed a problem on mobile platforms that prevented DVD's from
displaying.

* Fixed a problem that caused OpenGL programs to segfault when using
a graphical login with xdm/kdm, and doing the following sequence:
login, mode switch, logout, log in and run a GL app.

* Fixed some indirect rendering problems.

* Fixed a problem that caused Xconfigure to fail on NVIDIA drivers.

* Fixed a crash that occured when X forwarding over SSH.

* Fixed OpenGL front buffer clipping bug.

* Added xf86XVOffscreenImage support so the V4L module can use the
hardware scaler on YUV surfaces.

* Improved X-Render acceleration.

* Fixed a bug that prevented X-Render acceleration on GeForce3.

2001-05-14 version 1.0-1251

* Preliminary GeForce2 Go support.

* Added support for GeForce3 OpenGL and GLX extensions.

* Fixed many SMP bugs.

* Added TV-Out support.

* Fixed DGA depth change bug.

* Rewrote 2D offscreen memory allocation.

* Fixed X-Video in TwinView.

* Acceleration for X-Render extension.

* Fixed up GLXPixmap rendering.

* Fixed problem with make current to same drawable but different
dpy.

* Fixed problem in which OpenGL would segfault when reading X
atoms.

* X now gets the DPI (dots per inch) from the monitor's EDID (rather
than just defaulting to 75 dpi).

* All DPMS modes are now supported. There are still issues on flat
panels and on the second head of a TwinView system (please see the
README).

* Fixed support for AGP on systems with 1 GB or more of memory.

2001-02-16 version 0.9-769

* Fixed problem where direct rendering applications were allowed to
continue rendering after xkill was called.

* Fixed problem where Tribes 2 crashed when compressed textures
(s3tc textures) were used.

* Some drawable leaks were fixed in X and GLX.

* Fixed problem where the application would hang when calling
glXMakeCurrent while holding the X server grab.

* Bios-posting problems on GeForce2 GTS and GeForce Ultra cards were
fixed. This bug resulted in a significant performance loss.

* Added support for the X Render extension.

* TwinView functionality was enhanced so that each head can pan
independently.

* Fixed problem on TNT and TNT2 where Xv(Shm)PutImage returned
BadAlloc in high resolutions when there was not enough video
bandwidth to display the YUV video overlay correctly. This works
now but the resulting display has artifacts.

* Fixed problem with cursor hanges in X.

* Fixed problem with X console not restoring on some monitors.

* Fixed problem with fork() and OpenGL rendering.

* Fixed problem with X driver module, nvidia_drv.o, being stripped
when RPM was rebuilt.

* Added missing PCI device ids for some TNT2 variants and GeForce3.

* Fixed problem where the kernel would often hang during X and/or
OpenGL operation when on an SMP machine and using the 2.4 kernel.

* Fixed SYNC_TO_VBLANK hang with 2.4 kernels.

* DPMS is partially working again. It is possible to set the "off"
option for dpms. DPMS options "suspend" and "standby" are not
fully supported -- they simply blank the screen.

2000-12-20 version 0.96

* Fix many SMP problems.

* Fix memory management problems that arise with large RAM systems
(500M+).

* Add multi-mon OpenGL support.

* Add TwiNView support.

* More modeline handling fixes, added double-scan support.

* Fix bios-posting problems with TNT2 M64s and GeForce2 MXs.

* Dynamic run-time selection between nvagp and agpgart.

* Fix TNT2 OpenGL slowdowns (noticeable in UT).

2000-08-30 version 0.95

* Improve XFree86 4.0.1 support.

* Re-fixed console switch lockup.

* Fix some AGP regressions. Better detection/support for AGPGART.

* Fix color palette problems (xgamma, direct color visuals).

* Add bios posting override to help with some card problems (M64).

* Update included 2.4 support to newest test kernels.

2000-07-07 version 0.94

* Add support for XFree86 4.0.1

* Fix modesetting problem.

* Add AGPGART support (nvagpgart v. 0.5-5).

* Add GeForce2 MX support.

* Fixed various hangs.

* Added FSAA support.

* Fixed problem where an opengl app dying during a console switch
would kill the X Server.

2000-06-08 version 0.9-3

* Allow Modeline directives in the XF86Config file to override our
auto-detection of monitor resolutions and refresh rates.

* "Correct" fix for TNT memory-type problems.

* Fix for VT switch lockups.

* Fix for general ALI chipset lockups.

* Addition and documentation of some registry keys. Check
os-registry.c in the kernel source directory for more details and
options.

* Work around Quake3 modeswitch crashing bug. Note: It's really a
bug in dlopen().

* Major improvement in multi-threading behavior.

* Display list sharing with glXCreateContext works now.

* Faster implementation of glTexImage/glTexSubImage and
glCopyTexImage/glCopytexSubImage calls.

* Fixed kernel memory leak, relating to threaded OpenGL. This
problem was most noticeable with xmms.

* Fix build problems with older 2.2.x kernels (RedHat 6.0).

2000-05-02 version 0.9-2

* Fixed problem initializing TNT w/ SGRAM.

* Removed all GPL'd code from nv.c.

* Better logging and messages everywhere for tracking problems.

* Dynamic allocation of client data in kernel, rather than static.

* Incorporated *unsupported* 2.3 kernel changes for completeness.

* Makefile updates - add -D_LOOSE_KERNEL_NAMES, and default to 'make
install'.

* Improved mode switching in quake3 (still see occasional crashes).

* Changed installation name of libraries. We now have a .1.0.1
revision name in the libraries.

* Temporarily force disabling of AGP fast writes for all chipsets.

* Fixed monitor issues, allow overriding of sync polarities.

2000-04-25 version 0.9-1

* Initial Release.


最后由 skyx 编辑于 2007-01-03 14:27,总共编辑了 1 次

页首
 用户资料  
 
2 楼 
 文章标题 :
帖子发表于 : 2007-01-03 1:18 
头像

注册: 2006-12-23 13:46
帖子: 9203
地址: Azores Islands
送出感谢: 0 次
接收感谢: 1
这里面也没有看到什么图片呀?

sudo dpkg -L nvidia-glx
Password:
Sorry, try again.
Password:
/.
/usr
/usr/bin
/usr/bin/nvidia-settings
/usr/bin/nvidia-bug-report.sh
/usr/bin/nvidia-xconfig
/usr/lib
/usr/lib/tls
/usr/lib/tls/libnvidia-tls.so.1.0.9631
/usr/lib/xorg
/usr/lib/xorg/modules
/usr/lib/xorg/modules/drivers
/usr/lib/xorg/modules/drivers/nvidia_drv.so
/usr/lib/xorg/modules/extensions
/usr/lib/xorg/modules/libglx.so.1.0.9631
/usr/lib/libXvMCNVIDIA.so.1.0.9631
/usr/lib/libnvidia-tls.so.1.0.9631
/usr/lib/libGL.so.1.0.9631
/usr/lib/nvidia
/usr/lib/nvidia/tls_test_dso.so
/usr/lib/nvidia/tls_test
/usr/lib/libnvidia-cfg.so.1.0.9631
/usr/lib/libGLcore.so.1.0.9631
/usr/sbin
/usr/sbin/nvidia-glx-config
/usr/lib32
/usr/lib32/nvidia
/usr/share
/usr/share/bug
/usr/share/bug/nvidia-glx
/usr/share/bug/nvidia-glx/script
/usr/share/doc
/usr/share/doc/nvidia-glx
/usr/share/doc/nvidia-glx/README.txt.gz
/usr/share/doc/nvidia-glx/README.Debian
/usr/share/doc/nvidia-glx/copyright
/usr/share/doc/nvidia-glx/examples
/usr/share/doc/nvidia-glx/examples/XF86Config.sample.gz
/usr/share/doc/nvidia-glx/nvidia-settings-user-guide.txt
/usr/share/doc/nvidia-glx/NVIDIA_Changelog.gz
/usr/share/doc/nvidia-glx/changelog.Debian.gz
/usr/share/man
/usr/share/man/man1
/usr/share/man/man1/nvidia-xconfig.1.gz
/usr/share/man/man1/nvidia-settings.1.gz
/usr/share/lintian
/usr/share/lintian/overrides
/usr/share/lintian/overrides/nvidia-glx
/usr/lib/tls/libnvidia-tls.so.1
/usr/lib/xorg/modules/libglx.so
package diverts others to: /usr/lib/nvidia/libglx.so.xlibmesa
/usr/lib/libGL.so.1
package diverts others to: /usr/lib/nvidia/libGL.so.1.xlibmesa
/usr/lib/libnvidia-cfg.so.1
/usr/lib/libnvidia-tls.so.1
/usr/lib/libXvMCNVIDIA_dynamic.so.1
/usr/lib/libXvMCNVIDIA.so.1
/usr/lib/libGLcore.so.1


页首
 用户资料  
 
3 楼 
 文章标题 :
帖子发表于 : 2007-01-03 2:12 
头像

注册: 2005-08-15 0:04
帖子: 1880
地址: 南7技校
送出感谢: 0 次
接收感谢: 0 次
看了一下 nvidia-xconfig 的 man 确实有关于 logo 的选项,我是懒得折腾了,楼主可以试试看。

man nvidia-xconfig


附件:
nvidia.png
nvidia.png [ 373.07 KiB | 被浏览 460 次 ]



_________________
飞得高,飞得低,学习再学习,多少大秘密!
http://zhan.blog.ubuntu.org.cn
页首
 用户资料  
 
4 楼 
 文章标题 :
帖子发表于 : 2007-01-03 14:30 
头像

注册: 2006-12-23 13:46
帖子: 9203
地址: Azores Islands
送出感谢: 0 次
接收感谢: 1
现在找到了修改办法:

修改/etc/X11/xorg.conf
在其中加入一项:

Option "LogoPath" "/xx/xx/xx.png"

xx为新log文件的所在地和名称

方法是没有错,但不知道图片的大小和格式,我用1024x768 640x480的图片来改都没有成功,不知nvidia对图片有何要求?


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 4 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 4 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译