当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 6 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : 关于移动硬盘!急
帖子发表于 : 2007-01-03 12:04 

注册: 2006-09-15 19:14
帖子: 87
送出感谢: 0 次
接收感谢: 0 次
刚买的移动硬盘,插上用sudo fdisk -l都找不到呢?在windows下能找到的。
u盘插上就可以看到的。这个该怎么办呢 ?


页首
 用户资料  
 
2 楼 
 文章标题 :
帖子发表于 : 2007-01-03 12:10 
头像

注册: 2005-08-14 21:55
帖子: 58428
地址: 长沙
送出感谢: 4
接收感谢: 272
lsusb
dmesg
看信息


_________________
● 鸣学


页首
 用户资料  
 
3 楼 
 文章标题 :
帖子发表于 : 2007-01-03 12:30 

注册: 2006-09-15 19:14
帖子: 87
送出感谢: 0 次
接收感谢: 0 次
ee大哥,你帮我看看什么原因 谢谢!
guorh@maomao:~$ lsusb
Bus 003 Device 005: ID 048d:8903 Integrated Technology Express, Inc.
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
guorh@maomao:~$ dmesg
[17179569.184000] Linux version 2.6.17-10-386 (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 Fri Oct 13 18:41:40 UTC 2006 (Ubuntu 2.6.17-10.33-386)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[17179569.184000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[17179569.184000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[17179569.184000] BIOS-e820: 00000000fefffc00 - 00000000ff000000 (reserved)
[17179569.184000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 511MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000f3890
[17179569.184000] On node 0 totalpages: 131056
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 126960 pages, LIFO batch:31
[17179569.184000] DMI 2.2 present.
[17179569.184000] ACPI: RSDP (v000 Nvidia ) @ 0x000f7760
[17179569.184000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
[17179569.184000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff30c0
[17179569.184000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff7dc0
[17179569.184000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x4008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:12 APIC version 16
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: BIOS IRQ0 pin2 override ignored.
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] ACPI: IRQ14 used by override.
[17179569.184000] ACPI: IRQ15 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=UUID=89f1dfdb-45d1-4482-9c77-5ddee17259b1 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[17179569.184000] Detected 1962.652 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179570.140000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179570.140000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179570.148000] Memory: 508948k/524224k available (1829k kernel code, 14620k reserved, 1038k data, 288k init, 0k highmem)
[17179570.148000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179570.228000] Calibrating delay using timer specific routine.. 3929.35 BogoMIPS (lpj=7858708)
[17179570.228000] Security Framework v1.0.0 initialized
[17179570.228000] SELinux: Disabled at boot.
[17179570.228000] Mount-cache hash table entries: 512
[17179570.228000] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[17179570.228000] CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[17179570.228000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179570.228000] CPU: L2 Cache: 256K (64 bytes/line)
[17179570.228000] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
[17179570.228000] CPU: AMD Sempron(tm) Processor 2500+ stepping 02
[17179570.228000] Checking 'hlt' instruction... OK.
[17179570.244000] SMP alternatives: switching to UP code
[17179570.244000] Freeing SMP alternatives: 0k freed
[17179570.244000] checking if image is initramfs... it is
[17179570.748000] Freeing initrd memory: 6548k freed
[17179570.748000] ACPI: Core revision 20060707
[17179570.752000] ACPI: Looking for DSDT ... not found!
[17179570.764000] ENABLING IO-APIC IRQs
[17179570.764000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[17179570.912000] NET: Registered protocol family 16
[17179570.912000] EISA bus registered
[17179570.912000] ACPI: bus type pci registered
[17179570.924000] PCI: PCI BIOS revision 2.10 entry at 0xfa150, last bus=2
[17179570.924000] PCI: Using configuration type 1
[17179570.924000] Setting up standard PCI resources
[17179570.936000] ACPI: Interpreter enabled
[17179570.936000] ACPI: Using IOAPIC for interrupt routing
[17179570.936000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.936000] PCI: Probing PCI hardware (bus 00)
[17179570.940000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:08.0
[17179570.940000] Boot video device is 0000:01:00.0
[17179570.940000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179571.000000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[17179571.000000] ACPI: Power Resource [ISAV] (on)
[17179571.000000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[17179571.000000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.004000] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.004000] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.004000] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.004000] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179571.004000] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179571.004000] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[17179571.004000] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[17179571.004000] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.004000] ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 6 7 10 11 12 14 15)
[17179571.004000] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[17179571.004000] ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 6 7 10 11 12 14 15)
[17179571.004000] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179571.004000] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.008000] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.008000] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.008000] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.008000] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179571.008000] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[17179571.008000] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
[17179571.008000] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
[17179571.008000] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
[17179571.008000] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[17179571.008000] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[17179571.008000] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[17179571.008000] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[17179571.008000] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22 23) *0, disabled.
[17179571.012000] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[17179571.012000] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[17179571.012000] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[17179571.012000] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[17179571.012000] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[17179571.012000] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22 23) *0, disabled.
[17179571.012000] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[17179571.012000] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[17179571.012000] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[17179571.016000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179571.016000] pnp: PnP ACPI init
[17179571.020000] pnp: PnP ACPI: found 13 devices
[17179571.020000] PnPBIOS: Disabled by ACPI PNP
[17179571.020000] PCI: Using ACPI for IRQ routing
[17179571.020000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179571.052000] pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
[17179571.052000] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
[17179571.052000] pnp: 00:00: ioport range 0x4400-0x447f has been reserved
[17179571.052000] pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
[17179571.052000] pnp: 00:00: ioport range 0x4800-0x487f has been reserved
[17179571.052000] pnp: 00:00: ioport range 0x4880-0x48ff has been reserved
[17179571.052000] PCI: Bridge: 0000:00:0b.0
[17179571.052000] IO window: d000-dfff
[17179571.052000] MEM window: fea00000-feafffff
[17179571.052000] PREFETCH window: f4000000-fbffffff
[17179571.052000] PCI: Bridge: 0000:00:0e.0
[17179571.052000] IO window: c000-cfff
[17179571.052000] MEM window: fe900000-fe9fffff
[17179571.052000] PREFETCH window: fe800000-fe8fffff
[17179571.052000] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[17179571.052000] NET: Registered protocol family 2
[17179571.092000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[17179571.092000] TCP established hash table entries: 16384 (order: 4, 65536 bytes)
[17179571.092000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[17179571.092000] TCP: Hash tables configured (established 16384 bind 8192)
[17179571.092000] TCP reno registered
[17179571.092000] audit: initializing netlink socket (disabled)
[17179571.092000] audit(1167824247.092:1): initialized
[17179571.092000] VFS: Disk quotas dquot_6.5.1
[17179571.092000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179571.092000] Initializing Cryptographic API
[17179571.092000] io scheduler noop registered
[17179571.092000] io scheduler anticipatory registered
[17179571.092000] io scheduler deadline registered
[17179571.092000] io scheduler cfq registered (default)
[17179571.092000] isapnp: Scanning for PnP cards...
[17179571.444000] isapnp: No Plug & Play device found
[17179571.460000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179571.460000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.460000] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.464000] mice: PS/2 mouse device common for all mice
[17179571.464000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179571.464000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.464000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179571.464000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179571.464000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179571.464000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.464000] EISA: Probing bus 0 at eisa.0
[17179571.464000] Cannot allocate resource for EISA slot 4
[17179571.464000] EISA: Detected 0 cards.
[17179571.464000] TCP bic registered
[17179571.464000] NET: Registered protocol family 1
[17179571.464000] NET: Registered protocol family 8
[17179571.464000] NET: Registered protocol family 20
[17179571.464000] Using IPI Shortcut mode
[17179571.464000] ACPI: (supports S0 S3 S4 S5)
[17179571.464000] Freeing unused kernel memory: 288k freed
[17179571.484000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179572.684000] Capability LSM initialized
[17179572.704000] ACPI: Fan [FAN] (on)
[17179572.708000] ACPI: Thermal Zone [THRM] (24 C)
[17179573.176000] SCSI subsystem initialized
[17179573.180000] libata version 1.20 loaded.
[17179573.180000] sata_nv 0000:00:0a.0: version 0.8
[17179573.180000] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
[17179573.180000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSJ] -> GSI 23 (level, high) -> IRQ 177
[17179573.180000] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[17179573.180000] ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xF400 irq 177
[17179573.180000] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xF408 irq 177
[17179573.384000] ata1: SATA link down (SStatus 0)
[17179573.384000] scsi0 : sata_nv
[17179573.588000] ata2: SATA link down (SStatus 0)
[17179573.588000] scsi1 : sata_nv
[17179573.588000] NFORCE3-250: IDE controller at PCI slot 0000:00:08.0
[17179573.588000] NFORCE3-250: chipset revision 162
[17179573.588000] NFORCE3-250: not 100% native mode: will probe irqs later
[17179573.588000] NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround.
[17179573.588000] NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller
[17179573.588000] ide0: BM-DMA at 0xf900-0xf907, BIOS settings: hda:DMA, hdb:DMA
[17179573.588000] ide1: BM-DMA at 0xf908-0xf90f, BIOS settings: hdc:DMA, hdd:DMA
[17179573.588000] Probing IDE interface ide0...
[17179573.876000] hda: WDC WD800BB-00JHC0, ATA DISK drive
[17179574.548000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179574.552000] Probing IDE interface ide1...
[17179575.568000] hdd: BENQ COMBO CB523C, ATAPI CD/DVD-ROM drive
[17179575.624000] ide1 at 0x170-0x177,0x376 on irq 15
[17179575.628000] hda: max request size: 128KiB
[17179575.636000] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
[17179575.636000] hda: cache flushes supported
[17179575.636000] hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
[17179575.720000] hdd: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179575.720000] Uniform CD-ROM driver Revision: 3.20
[17179576.180000] usbcore: registered new driver usbfs
[17179576.180000] usbcore: registered new driver hub
[17179576.180000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179576.184000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[17179576.184000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 185
[17179576.184000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179576.184000] ohci_hcd 0000:00:02.0: OHCI Host Controller
[17179576.184000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[17179576.184000] ohci_hcd 0000:00:02.0: irq 185, io mem 0xfebff000
[17179576.236000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
[17179576.240000] usb usb1: configuration #1 chosen from 1 choice
[17179576.240000] hub 1-0:1.0: USB hub found
[17179576.240000] hub 1-0:1.0: 4 ports detected
[17179576.344000] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
[17179576.344000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 193
[17179576.344000] PCI: Setting latency timer of device 0000:00:02.1 to 64
[17179576.344000] ohci_hcd 0000:00:02.1: OHCI Host Controller
[17179576.344000] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[17179576.344000] ohci_hcd 0000:00:02.1: irq 193, io mem 0xfebfe000
[17179576.400000] usb usb2: configuration #1 chosen from 1 choice
[17179576.400000] hub 2-0:1.0: USB hub found
[17179576.400000] hub 2-0:1.0: 4 ports detected
[17179576.504000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[17179576.504000] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 201
[17179576.504000] PCI: Setting latency timer of device 0000:00:02.2 to 64
[17179576.504000] ehci_hcd 0000:00:02.2: EHCI Host Controller
[17179576.504000] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
[17179576.504000] ehci_hcd 0000:00:02.2: debug port 1
[17179576.504000] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[17179576.504000] ehci_hcd 0000:00:02.2: irq 201, io mem 0xfebfd000
[17179576.504000] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179576.504000] usb usb3: configuration #1 chosen from 1 choice
[17179576.504000] hub 3-0:1.0: USB hub found
[17179576.504000] hub 3-0:1.0: 8 ports detected
[17179576.608000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[17179576.608000] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APCH] -> GSI 23 (level, high) -> IRQ 177
[17179576.608000] PCI: Setting latency timer of device 0000:00:05.0 to 64
[17179577.128000] eth0: forcedeth.c: subsystem: 0147b:1c19 bound to 0000:00:05.0
[17179577.184000] kjournald starting. Commit interval 5 seconds
[17179577.184000] EXT3-fs: mounted filesystem with ordered data mode.
[17179587.268000] Real Time Clock Driver v1.12ac
[17179587.384000] input: PC Speaker as /class/input/input1
[17179587.400000] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[17179587.400000] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[17179587.880000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[17179588.028000] parport: PnPBIOS parport detected.
[17179588.028000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[17179588.056000] Linux agpgart interface v0.101 (c) Dave Jones
[17179588.056000] agpgart: Detected AGP bridge 0
[17179588.056000] agpgart: Setting up Nforce3 AGP.
[17179588.060000] agpgart: AGP aperture is 128M @ 0xe8000000
[17179588.160000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179588.164000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179588.208000] FDC 0 is a post-1991 82077
[17179588.324000] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[17179588.324000] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 22 (level, high) -> IRQ 185
[17179588.324000] PCI: Setting latency timer of device 0000:00:06.0 to 64
[17179588.644000] intel8x0_measure_ac97_clock: measured 53810 usecs
[17179588.644000] intel8x0: clocking to 46961
[17179589.212000] ts: Compaq touchscreen protocol output
[17179589.444000] NET: Registered protocol family 10
[17179589.444000] lo: Disabled Privacy Extensions
[17179589.444000] IPv6 over IPv4 tunneling driver
[17179589.484000] lp0: using parport0 (interrupt-driven).
[17179589.592000] Adding 570268k swap on /dev/disk/by-uuid/c7739943-4688-4426-95e9-e8d82b421c4a. Priority:-1 extents:1 across:570268k
[17179589.880000] EXT3 FS on hda8, internal journal
[17179590.060000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179590.060000] md: bitmap version 4.39
[17179590.204000] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
[17179633.872000] NET: Registered protocol family 17
[17179638.236000] ACPI: Power Button (FF) [PWRF]
[17179638.236000] ACPI: Power Button (CM) [PWRB]
[17179638.336000] ibm_acpi: ec object not found
[17179638.364000] pcc_acpi: loading...
[17179638.672000] powernow-k8: Power state transitions not supported
[17179638.692000] acpi_cpufreq: Unknown symbol cpu_online_map
[17179645.808000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[17179645.808000] apm: overridden by ACPI.
[17179652.344000] Bluetooth: Core ver 2.8
[17179652.344000] NET: Registered protocol family 31
[17179652.344000] Bluetooth: HCI device and connection manager initialized
[17179652.344000] Bluetooth: HCI socket layer initialized
[17179652.368000] Bluetooth: L2CAP ver 2.8
[17179652.368000] Bluetooth: L2CAP socket layer initialized
[17179652.392000] Bluetooth: HIDP (Human Interface Emulation) ver 1.1-mh1
[17179652.404000] Bluetooth: RFCOMM socket layer initialized
[17179652.404000] Bluetooth: RFCOMM TTY layer initialized
[17179652.404000] Bluetooth: RFCOMM ver 1.7
[17179768.872000] usb 3-2: new high speed USB device using ehci_hcd and address 2
[17179779.004000] usb 3-2: configuration #1 chosen from 1 choice
[17179779.100000] usbcore: registered new driver libusual
[17179779.144000] Initializing USB Mass Storage driver...
[17179779.144000] scsi2 : SCSI emulation for USB Mass Storage devices
[17179779.144000] usb-storage: device found at 2
[17179779.144000] usb-storage: waiting for device to settle before scanning
[17179779.144000] usbcore: registered new driver usb-storage
[17179779.144000] USB Mass Storage support registered.
[17179785.144000] usb-storage: device scan complete
[17179790.756000] usb 3-2: reset high speed USB device using ehci_hcd and address 2
[17179801.000000] usb 3-2: reset high speed USB device using ehci_hcd and address 2
[17179801.248000] usb 3-2: reset high speed USB device using ehci_hcd and address 2
[17179811.492000] usb 3-2: reset high speed USB device using ehci_hcd and address 2
[17179811.624000] 2:0:0:0: scsi: Device offlined - not ready after error recovery
[17180565.960000] usb 3-2: USB disconnect, address 2
[17180593.612000] ohci_hcd 0000:00:02.0: wakeup
[17180593.996000] usb 1-2: new full speed USB device using ohci_hcd and address 2
[17180594.200000] usb 1-2: configuration #1 chosen from 1 choice
[17180594.200000] scsi3 : SCSI emulation for USB Mass Storage devices
[17180594.200000] usb-storage: device found at 2
[17180594.200000] usb-storage: waiting for device to settle before scanning
[17180599.200000] usb-storage: device scan complete
[17180599.208000] Vendor: Generic Model: USB Flash Drive Rev: 1.03
[17180599.208000] Type: Direct-Access ANSI SCSI revision: 02
[17180599.268000] SCSI device sda: 257536 512-byte hdwr sectors (132 MB)
[17180599.276000] sda: Write Protect is off
[17180599.276000] sda: Mode Sense: 0b 00 00 08
[17180599.276000] sda: assuming drive cache: write through
[17180599.300000] SCSI device sda: 257536 512-byte hdwr sectors (132 MB)
[17180599.308000] sda: Write Protect is off
[17180599.308000] sda: Mode Sense: 0b 00 00 08
[17180599.308000] sda: assuming drive cache: write through
[17180599.308000] sda: sda1
[17180599.320000] sd 3:0:0:0: Attached scsi removable disk sda
[17180599.328000] sd 3:0:0:0: Attached scsi generic sg0 type 0
[17180600.100000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17180667.780000] usb 1-2: USB disconnect, address 2
[17180673.804000] usb 3-2: new high speed USB device using ehci_hcd and address 4
[17180683.936000] usb 3-2: configuration #1 chosen from 1 choice
[17180683.936000] scsi4 : SCSI emulation for USB Mass Storage devices
[17180683.936000] usb-storage: device found at 4
[17180683.936000] usb-storage: waiting for device to settle before scanning
[17180689.936000] usb-storage: device scan complete
[17180695.548000] usb 3-2: reset high speed USB device using ehci_hcd and address 4
[17180705.792000] usb 3-2: reset high speed USB device using ehci_hcd and address 4
[17180706.040000] usb 3-2: reset high speed USB device using ehci_hcd and address 4
[17180716.284000] usb 3-2: reset high speed USB device using ehci_hcd and address 4
[17180716.416000] 4:0:0:0: scsi: Device offlined - not ready after error recovery
[17180782.680000] usb 3-2: USB disconnect, address 4
[17181125.388000] usb 3-2: new high speed USB device using ehci_hcd and address 5
[17181135.520000] usb 3-2: configuration #1 chosen from 1 choice
[17181135.520000] scsi5 : SCSI emulation for USB Mass Storage devices
[17181135.520000] usb-storage: device found at 5
[17181135.520000] usb-storage: waiting for device to settle before scanning
[17181141.520000] usb-storage: device scan complete
[17181147.132000] usb 3-2: reset high speed USB device using ehci_hcd and address 5
[17181157.376000] usb 3-2: reset high speed USB device using ehci_hcd and address 5
[17181157.624000] usb 3-2: reset high speed USB device using ehci_hcd and address 5
[17181167.868000] usb 3-2: reset high speed USB device using ehci_hcd and address 5
[17181168.000000] 5:0:0:0: scsi: Device offlined - not ready after error recovery
[17181922.912000] ohci_hcd 0000:00:02.0: wakeup
[17181923.296000] usb 1-4: new full speed USB device using ohci_hcd and address 3
[17181923.500000] usb 1-4: configuration #1 chosen from 1 choice
[17181923.500000] scsi6 : SCSI emulation for USB Mass Storage devices
[17181923.500000] usb-storage: device found at 3
[17181923.500000] usb-storage: waiting for device to settle before scanning
[17181928.500000] usb-storage: device scan complete
[17181928.508000] Vendor: Generic Model: USB Flash Drive Rev: 1.03
[17181928.508000] Type: Direct-Access ANSI SCSI revision: 02
[17181928.536000] SCSI device sda: 257536 512-byte hdwr sectors (132 MB)
[17181928.544000] sda: Write Protect is off
[17181928.544000] sda: Mode Sense: 0b 00 00 08
[17181928.544000] sda: assuming drive cache: write through
[17181928.568000] SCSI device sda: 257536 512-byte hdwr sectors (132 MB)
[17181928.576000] sda: Write Protect is off
[17181928.576000] sda: Mode Sense: 0b 00 00 08
[17181928.576000] sda: assuming drive cache: write through
[17181928.576000] sda: sda1
[17181928.588000] sd 6:0:0:0: Attached scsi removable disk sda
[17181928.588000] sd 6:0:0:0: Attached scsi generic sg0 type 0
[17181931.448000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17182175.496000] usb 1-4: USB disconnect, address 3


页首
 用户资料  
 
4 楼 
 文章标题 :
帖子发表于 : 2007-01-03 12:40 

注册: 2006-09-15 19:14
帖子: 87
送出感谢: 0 次
接收感谢: 0 次
谢谢ee,问题解决了,是插口电不足 换了一个插口就好了。


页首
 用户资料  
 
5 楼 
 文章标题 :
帖子发表于 : 2007-01-03 12:54 
头像

注册: 2005-08-14 21:55
帖子: 58428
地址: 长沙
送出感谢: 4
接收感谢: 272
我晕,发这么多,应该发插入的前后的dmesg。看到正常识别了,至少2次插到了1.0的端口,其他使用2.0的端口,都正常,然后就断开(看不出是人为还是自动)。

然后,就看到你的4楼信息。

:em21


_________________
● 鸣学


页首
 用户资料  
 
6 楼 
 文章标题 :
帖子发表于 : 2007-01-03 13:11 

注册: 2006-09-15 19:14
帖子: 87
送出感谢: 0 次
接收感谢: 0 次
ee大哥,新问题出现了,不能写东西怎么办呢?
都是只读的。


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 6 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 4 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译