当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 8 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : [问题]各位:如何让 915resolution 自动运行?
帖子发表于 : 2007-01-09 3:01 

注册: 2006-06-15 14:41
帖子: 13
送出感谢: 0 次
接收感谢: 0 次
Ubuntu 6.06的时候成功了一次
这次重新装完Ubuntu 6.10 后就忘了当时在哪里设置的


Ubuntu 6.10 已经更新
915resolution 已经安装好 (论坛上说会自动解决,我的没有解决啊!)
/etc/X11/xorg.conf 里面修改好

之后在
/etc/inittab 加入了
/usr/bin/915resolution 58 1280 800 32

/etc/init.d/bootmisc.sh 加入了
/usr/bin/915resolution 58 1280 800 32

/etc/init.d/rc.local 加入了
#915resolution
S1:123456:boot:915resolution 58 1280 800 32


结果只要一重启又回到1024了

请问,应该怎么改呢?


页首
 用户资料  
 
2 楼 
 文章标题 :
帖子发表于 : 2007-01-09 11:15 

注册: 2006-01-18 15:01
帖子: 1074
送出感谢: 0 次
接收感谢: 1
不须要自己配置的。
如果要,
dpkg-reconfigure 915resolution


页首
 用户资料  
 
3 楼 
 文章标题 :
帖子发表于 : 2007-01-09 12:32 

注册: 2006-06-15 14:41
帖子: 13
送出感谢: 0 次
接收感谢: 0 次
xiechy 写道:
不须要自己配置的。
如果要,
dpkg-reconfigure 915resolution


我试过了 还是不行啊~
还有我更新后 无线网卡就不能用了而,更新时还是用无线网卡下载的呢,郁闷。


页首
 用户资料  
 
4 楼 
 文章标题 :
帖子发表于 : 2007-01-09 13:16 

注册: 2006-01-18 15:01
帖子: 1074
送出感谢: 0 次
接收感谢: 1
你的无线网卡的型号?找到之后手动lsmod|grep **看看


页首
 用户资料  
 
5 楼 
 文章标题 :
帖子发表于 : 2007-01-09 13:18 

注册: 2006-01-18 15:01
帖子: 1074
送出感谢: 0 次
接收感谢: 1
915的问题看看Xorg.0.log,看看出什么错


页首
 用户资料  
 
6 楼 
 文章标题 :
帖子发表于 : 2007-01-09 14:46 

注册: 2006-06-15 14:41
帖子: 13
送出感谢: 0 次
接收感谢: 0 次
xiechy 写道:
915的问题看看Xorg.0.log,看看出什么错


I can't find some error in the log, can you help me?

Log:
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 0
Mode: 6f (0x0)
ModeAttributes: 0x0
WinAAttributes: 0x0
WinBAttributes: 0x0
WinGranularity: 0
WinSize: 0
WinASegment: 0x0
WinBSegment: 0x0
WinFuncPtr: 0x0
BytesPerScanline: 0
XResolution: 0
YResolution: 0
XCharSize: 0
YCharSize: 0
NumberOfPlanes: 0
BitsPerPixel: 0
NumberOfBanks: 0
MemoryModel: 0
BankSize: 0
NumberOfImages: 0
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0x0
LinBytesPerScanLine: 0
BnkNumberOfImagePages: 0
LinNumberOfImagePages: 0
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 0
Mode: 70 (0x0)
ModeAttributes: 0x0
WinAAttributes: 0x0
WinBAttributes: 0x0
WinGranularity: 0
WinSize: 0
WinASegment: 0x0
WinBSegment: 0x0
WinFuncPtr: 0x0
BytesPerScanline: 0
XResolution: 0
YResolution: 0
XCharSize: 0
YCharSize: 0
NumberOfPlanes: 0
BitsPerPixel: 0
NumberOfBanks: 0
MemoryModel: 0
BankSize: 0
NumberOfImages: 0
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0x0
LinBytesPerScanLine: 0
BnkNumberOfImagePages: 0
LinNumberOfImagePages: 0
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 0
Mode: 71 (0x0)
ModeAttributes: 0x0
WinAAttributes: 0x0
WinBAttributes: 0x0
WinGranularity: 0
WinSize: 0
WinASegment: 0x0
WinBSegment: 0x0
WinFuncPtr: 0x0
BytesPerScanline: 0
XResolution: 0
YResolution: 0
XCharSize: 0
YCharSize: 0
NumberOfPlanes: 0
BitsPerPixel: 0
NumberOfBanks: 0
MemoryModel: 0
BankSize: 0
NumberOfImages: 0
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0x0
LinBytesPerScanLine: 0
BnkNumberOfImagePages: 0
LinNumberOfImagePages: 0
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 0
(WW) I810(0): config file hsync range 28-64kHz not within DDC hsync ranges.
(WW) I810(0): config file vrefresh range 43-60Hz not within DDC vrefresh ranges.
(II) I810(0): Generic Monitor: Using hsync range of 28.00-64.00 kHz
(II) I810(0): Generic Monitor: Using vrefresh range of 43.00-60.00 Hz
(II) I810(0): Increasing the scanline pitch to allow tiling mode (1280 -> 2048).
(--) I810(0): Virtual size is 1280x800 (pitch 2048)
(**) I810(0): *Built-in mode "1280x800"
(**) I810(0): Built-in mode "1024x768"
(**) I810(0): Built-in mode "800x600"
(**) I810(0): Built-in mode "640x480"
(--) I810(0): Display dimensions: (330, 210) mm
(--) I810(0): DPI set to (98, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(==) I810(0): VBE Restore workaround: enabled.
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules/libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.3
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xb0000000 - 0xb003ffff (0x40000) MS[B]
[1] 0 0 0xc0000000 - 0xcfffffff (0x10000000) MS[B]
[2] 0 0 0xb0080000 - 0xb00fffff (0x80000) MS[B]
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xb0106000 - 0xb0107fff (0x2000) MX[B]
[8] -1 0 0xb010b000 - 0xb010bfff (0x1000) MX[B]
[9] -1 0 0xb0104000 - 0xb0105fff (0x2000) MX[B]
[10] -1 0 0xb0100000 - 0xb0103fff (0x4000) MX[B]
[11] -1 0 0xb0109000 - 0xb01097ff (0x800) MX[B]
[12] -1 0 0xb0040400 - 0xb00404ff (0x100) MX[B]
[13] -1 0 0xb0040800 - 0xb00409ff (0x200) MX[B]
[14] -1 0 0xb0040000 - 0xb00403ff (0x400) MX[B]
[15] -1 0 0xb0000000 - 0xb003ffff (0x40000) MX[B](B)
[16] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[17] -1 0 0xb0080000 - 0xb00fffff (0x80000) MX[B](B)
[18] -1 0 0x52000000 - 0x5207ffff (0x80000) MX[B](B)
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[22] 0 0 0x00001800 - 0x00001807 (0x8) IS[B]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[24] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[25] -1 0 0x000020a0 - 0x000020bf (0x20) IX[B]
[26] -1 0 0x00001810 - 0x0000181f (0x10) IX[B]
[27] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[28] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[29] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]
[30] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[31] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[32] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[33] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[34] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[35] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B)
[36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[37] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) I810(0): initializing int10
(WW) I810(0): Bad V_BIOS checksum
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 7872 kB
(II) I810(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) I810(0): Allocated 128 kB for the ring buffer at 0x0
(II) I810(0): Allocating at least 256 scanlines for pixmap cache
(II) I810(0): Initial framebuffer allocation size: 12288 kByte
(II) I810(0): Allocated 4 kB for HW cursor at 0xffff000 (0x33039000)
(II) I810(0): Allocated 16 kB for HW (ARGB) cursor at 0xfffb000 (0x30238000)
(II) I810(0): Allocated 4 kB for Overlay registers at 0xfffa000 (0x31cb6000).
(WW) I810(0): xf86AllocateGARTMemory: allocation of 16 pages failed
(Cannot allocate memory)
(II) I810(0): Allocated 64 kB for the scratch buffer at 0xffea000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) I810(0): [drm] DRM interface version 1.2
(II) I810(0): [drm] created "i915" driver at busid "pci:0000:00:02.0"
(II) I810(0): [drm] added 8192 byte SAREA at 0xf8d92000
(II) I810(0): [drm] mapped SAREA 0xf8d92000 to 0xb7edc000
(II) I810(0): [drm] framebuffer handle = 0xc0020000
(II) I810(0): [drm] added 1 reserved context for kernel
(WW) I810(0): xf86AllocateGARTMemory: allocation of 8 pages failed
(Cannot allocate memory)
(II) I810(0): Allocated 32 kB for the logical context at 0xffe2000.
(WW) I810(0): xf86AllocateGARTMemory: allocation of 1600 pages failed
(Cannot allocate memory)
(II) I810(0): Allocated 6400 kB for the back buffer at 0xf000000.
(WW) I810(0): xf86AllocateGARTMemory: allocation of 1600 pages failed
(Cannot allocate memory)
(II) I810(0): Allocated 6400 kB for the depth buffer at 0xe800000.
(WW) I810(0): xf86AllocateGARTMemory: allocation of 10048 pages failed
(Cannot allocate memory)
(II) I810(0): Allocated 40192 kB for textures at 0xc0c0000
(WW) I810(0): xf86AllocateGARTMemory: allocation of 1121 pages failed
(Cannot allocate memory)
(II) I810(0): 0x81fe3e0: Memory at offset 0x00020000, size 12288 kBytes
(II) I810(0): 0x81ff1e0: Memory at offset 0x0ffff000, size 4 kBytes
(II) I810(0): 0x81ff208: Memory at offset 0x0fffb000, size 16 kBytes
(II) I810(0): 0x81fecac: Memory at offset 0x00000000, size 128 kBytes
(II) I810(0): 0x81fe420: Memory at offset 0x0ffea000, size 64 kBytes
(II) I810(0): 0x81ff230: Memory at offset 0x0fffa000, size 4 kBytes
(II) I810(0): 0x81fe5b8: Memory at offset 0x0ffe2000, size 32 kBytes
(II) I810(0): 0x81fe5d8: Memory at offset 0x0f000000, size 6400 kBytes
(II) I810(0): 0x81fe5f8: Memory at offset 0x0e800000, size 6400 kBytes
(II) I810(0): 0x81fe618: Memory at offset 0x0c0c0000, size 40192 kBytes
(II) I810(0): Activating tiled memory for the back buffer.
(II) I810(0): Activating tiled memory for the depth buffer.
(II) I810(0): [drm] Registers = 0xb0080000
(II) I810(0): [drm] ring buffer = 0xc0000000
(II) I810(0): [drm] init sarea width,height = 1280 x 800 (pitch 2048)
(II) I810(0): [drm] Mapping front buffer
(II) I810(0): [drm] Front Buffer = 0xc0020000
(II) I810(0): [drm] Back Buffer = 0xcf000000
(II) I810(0): [drm] Depth Buffer = 0xce800000
(II) I810(0): [drm] textures = 0xcc0c0000
(II) I810(0): [drm] Initialized kernel agp heap manager, 41156608
(II) I810(0): [drm] dma control initialized, using IRQ 177
(II) I810(0): [dri] visual configs initialized
(==) I810(0): Write-combining range (0xc0000000,0x10000000)
(II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(WW) I810(0): Extended BIOS function 0x5f05 failed.
(II) I810(0): xf86BindGARTMemory: bind key 8 at 0x007bf000 (pgoffset 1983)
(II) I810(0): xf86BindGARTMemory: bind key 0 at 0x0ffff000 (pgoffset 65535)
(II) I810(0): xf86BindGARTMemory: bind key 1 at 0x0fffb000 (pgoffset 65531)
(II) I810(0): xf86BindGARTMemory: bind key 3 at 0x0ffea000 (pgoffset 65514)
(II) I810(0): xf86BindGARTMemory: bind key 2 at 0x0fffa000 (pgoffset 65530)
(II) I810(0): xf86BindGARTMemory: bind key 4 at 0x0ffe2000 (pgoffset 65506)
(II) I810(0): xf86BindGARTMemory: bind key 5 at 0x0f000000 (pgoffset 61440)
(II) I810(0): xf86BindGARTMemory: bind key 6 at 0x0e800000 (pgoffset 59392)
(II) I810(0): xf86BindGARTMemory: bind key 7 at 0x0c0c0000 (pgoffset 49344)
(--) I810(0): A non-CRT device is attached to pipe B.
No refresh rate overrides will be attempted.
(II) I810(0): Display plane A is disabled and connected to Pipe A.
(II) I810(0): Display plane B is enabled and connected to Pipe B.
(II) I810(0): Enabling plane B.
(II) I810(0): Display plane A is now disabled and connected to Pipe A.
(II) I810(0): Display plane B is now enabled and connected to Pipe B.
(II) I810(0): PIPEACONF is 0x00000000
(II) I810(0): PIPEBCONF is 0x80000000
(II) I810(0): Mode bandwidth is 61 Mpixel/s
(II) I810(0): maxBandwidth is 1088 Mbyte/s, pipe bandwidths are 420 Mbyte/s, 0 Mbyte/s
(II) I810(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
16 128x128 slots
4 256x256 slots
(==) I810(0): Backing store disabled
(==) I810(0): Silken mouse enabled
(II) I810(0): Initializing HW Cursor
(**) Option "dpms"
(**) I810(0): DPMS enabled
(II) I810(0): Set up overlay video
(II) I810(0): Set up textured video
(II) I810(0): X context handle = 0x1
(II) I810(0): [drm] installed DRM signal handler
(II) I810(0): [DRI] installation complete
(II) I810(0): direct rendering: Enabled
(II) I810(0): RandR enabled, ignore the following RandR disabled message.
(II) I810(0): Rotating to 0 degrees
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
error opening security policy file /usr/lib/xserver/SecurityPolicy
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Generic Keyboard: XkbLayout: "us"
(**) Option "XkbOptions" "lv3:ralt_switch"
(**) Generic Keyboard: XkbOptions: "lv3:ralt_switch"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ExplorerPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Option "SendCoreEvents"
(**) stylus: always reports core events
(**) stylus device is /dev/wacom
(**) stylus is in absolute mode
(**) stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) stylus: serial speed 9600
(**) Option "SendCoreEvents"
(**) cursor: always reports core events
(**) cursor device is /dev/wacom
(**) cursor is in relative mode
(**) cursor: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) cursor: serial speed 9600
(**) Option "SendCoreEvents"
(**) eraser: always reports core events
(**) eraser device is /dev/wacom
(**) eraser is in absolute mode
(**) eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) eraser: serial speed 9600
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(II) XINPUT: Adding extended input device "cursor" (type: Wacom Cursor)
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
xkb_keycodes { include "xfree86+aliases(qwerty)" };
xkb_types { include "complete" };
xkb_compatibility { include "complete" };
xkb_symbols { include "pc(pc105)+us+level3(ralt_switch)" };
xkb_geometry { include "pc(pc105)" };
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Success
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Success
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Success
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/X11/TTF/, removing from list!
Could not init font path element /usr/share/fonts/X11/OTF, removing from list!
Could not init font path element /usr/share/fonts/X11/CID/, removing from list!
(--) I810(0): A non-CRT device is attached to pipe B.
No refresh rate overrides will be attempted.
(II) I810(0): Display plane A is disabled and connected to Pipe A.
(II) I810(0): Display plane B is enabled and connected to Pipe B.
(II) I810(0): Enabling plane B.
(II) I810(0): Display plane A is now disabled and connected to Pipe A.
(II) I810(0): Display plane B is now enabled and connected to Pipe B.
(II) I810(0): PIPEACONF is 0x00000000
(II) I810(0): PIPEBCONF is 0x80000000
(II) I810(0): Mode bandwidth is 47 Mpixel/s
(II) I810(0): maxBandwidth is 1088 Mbyte/s, pipe bandwidths are 252 Mbyte/s, 0 Mbyte/s
(II) I810(0): xf86UnbindGARTMemory: unbind key 7
(II) I810(0): xf86UnbindGARTMemory: unbind key 8
(II) I810(0): xf86UnbindGARTMemory: unbind key 6
(II) I810(0): xf86UnbindGARTMemory: unbind key 5
(II) I810(0): Rotating Screen to 0 degrees
(WW) I810(0): xf86AllocateGARTMemory: allocation of 1536 pages failed
(Cannot allocate memory)
(II) I810(0): Allocated 6144 kB for the back buffer at 0xf000000.
(WW) I810(0): xf86AllocateGARTMemory: allocation of 1536 pages failed
(Cannot allocate memory)
(II) I810(0): Allocated 6144 kB for the depth buffer at 0xe800000.
(WW) I810(0): xf86AllocateGARTMemory: allocation of 10176 pages failed
(Cannot allocate memory)
(II) I810(0): Allocated 40704 kB for textures at 0xc040000
(WW) I810(0): xf86AllocateGARTMemory: allocation of 1121 pages failed
(Cannot allocate memory)
(II) I810(0): 0x81fe5d8: Memory at offset 0x0f000000, size 6144 kBytes
(II) I810(0): 0x81fe5f8: Memory at offset 0x0e800000, size 6144 kBytes
(II) I810(0): xf86BindGARTMemory: bind key 5 at 0x0f000000 (pgoffset 61440)
(II) I810(0): xf86BindGARTMemory: bind key 6 at 0x0e800000 (pgoffset 59392)
(II) I810(0): xf86BindGARTMemory: bind key 8 at 0x007bf000 (pgoffset 1983)
(II) I810(0): xf86BindGARTMemory: bind key 7 at 0x0c040000 (pgoffset 49216)
(II) I810(0): Activating tiled memory for the back buffer.
(II) I810(0): Activating tiled memory for the depth buffer.
(II) I810(0): [drm] init sarea width,height = 1024 x 768 (pitch 2048)
(II) I810(0): [drm] Mapping front buffer
(II) I810(0): [drm] Front Buffer = 0xc0020000
(II) I810(0): [drm] Back Buffer = 0xcf000000
(II) I810(0): [drm] Depth Buffer = 0xce800000
(II) I810(0): [drm] textures = 0xcc040000
(II) I810(0): [drm] Initialized kernel agp heap manager, 41680896
Usage: grep [OPTION]... PATTERN [FILE]...
Try `grep --help' for more information.


页首
 用户资料  
 
7 楼 
 文章标题 :
帖子发表于 : 2007-01-09 14:52 

注册: 2006-06-15 14:41
帖子: 13
送出感谢: 0 次
接收感谢: 0 次
xiechy 写道:
915的问题看看Xorg.0.log,看看出什么错




But in the last of /var/log/boot have some info may be useful

Jan 9 14:27:16 rc2: /etc/rc2.d/S99rc.local: 8: S1:123456:boot:915resolution: not found
Jan 9 14:27:16 rc2: Intel 800/900 Series VBIOS Hack : version 0.5.2
Jan 9 14:27:16 rc2:
Jan 9 14:27:16 rc2: Chipset: 915GM
Jan 9 14:27:16 rc2: BIOS: TYPE 1
Jan 9 14:27:16 rc2: Mode Table Offset: $C0000 + $269
Jan 9 14:27:16 rc2: Mode Table Entries: 36
Jan 9 14:27:16 rc2:
Jan 9 14:27:16 rc2: Patch mode 58 to resolution 1280x800 complete
Jan 9 14:27:16 rc2: * Running local boot scripts (/etc/rc.local) [ ok ]


Is it does not has "su" to run the "915resolution 58 1280 800 32" ?


页首
 用户资料  
 
8 楼 
 文章标题 :
帖子发表于 : 2007-01-09 14:55 

注册: 2006-01-18 15:01
帖子: 1074
送出感谢: 0 次
接收感谢: 1
1、915resolution已经包含一个/etc/init.d/的启动脚本 了,楼主必须把你自己做的那些多余的脚本去掉。
2、你的xorg.conf的具体内容


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 8 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 4 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译