当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 4 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : 为什么我的Ubuntu 6.10启动时总是有一段停顿?
帖子发表于 : 2007-01-31 20:59 

注册: 2006-03-17 13:40
帖子: 147
送出感谢: 0 次
接收感谢: 0 次
我的Ubuntu 6.10启动时总是有一段停顿,机器为ASUS M9A。以前使用6.06的时候没有这个问题。去掉Usplash后,并没有看到有任何的错误信息,但总有一段停顿?
zj@zj-laptop:/etc$ dmesg
[17179569.184000] Linux version 2.6.17-10-generic (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Tue Dec 5 22:28:26 UTC 2006 (Ubuntu 2.6.17-10.34-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000002efc0000 (usable)
[17179569.184000] BIOS-e820: 000000002efc0000 - 000000002efcf000 (ACPI data)
[17179569.184000] BIOS-e820: 000000002efcf000 - 000000002f000000 (ACPI NVS)
[17179569.184000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[17179569.184000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[17179569.184000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 751MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000ff780
[17179569.184000] On node 0 totalpages: 192448
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 188352 pages, LIFO batch:31
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ACPIAM ) @ 0x000f7360
[17179569.184000] ACPI: RSDT (v001 A M I OEMRSDT 0x02000627 MSFT 0x00000097) @ 0x2efc0000
[17179569.184000] ACPI: FADT (v002 A M I OEMFACP 0x02000627 MSFT 0x00000097) @ 0x2efc0200
[17179569.184000] ACPI: MADT (v001 A M I OEMAPIC 0x02000627 MSFT 0x00000097) @ 0x2efc0390
[17179569.184000] ACPI: MCFG (v001 A M I OEMMCFG 0x02000627 MSFT 0x00000097) @ 0x2efc03f0
[17179569.184000] ACPI: OEMB (v001 A M I AMI_OEM 0x02000627 MSFT 0x00000097) @ 0x2efcf040
[17179569.184000] ACPI: SSDT (v001 AMI CPU1PM 0x00000001 INTL 0x02002026) @ 0x2efc8510
[17179569.184000] ACPI: DSDT (v001 0AAAA 0AAAA000 0x00000000 INTL 0x02002026) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x808
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:13 APIC version 20
[17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 30000000 (gap: 2f000000:cfd14000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda7 ro locale=zh_CN
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 1729.236 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.656000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179569.660000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179569.676000] Memory: 753000k/769792k available (1910k kernel code, 16228k reserved, 1069k data, 308k init, 0k highmem)
[17179569.676000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179569.756000] Calibrating delay using timer specific routine.. 3462.29 BogoMIPS (lpj=6924593)
[17179569.756000] Security Framework v1.0.0 initialized
[17179569.756000] SELinux: Disabled at boot.
[17179569.756000] Mount-cache hash table entries: 512
[17179569.756000] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
[17179569.756000] CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
[17179569.756000] CPU: L1 I cache: 32K, L1 D cache: 32K
[17179569.756000] CPU: L2 cache: 2048K
[17179569.756000] CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000
[17179569.756000] Checking 'hlt' instruction... OK.
[17179569.772000] SMP alternatives: switching to UP code
[17179569.772000] Freeing SMP alternatives: 16k freed
[17179569.772000] checking if image is initramfs... it is
[17179570.308000] Freeing initrd memory: 5635k freed
[17179570.308000] ACPI: Core revision 20060707
[17179570.308000] ACPI: Looking for DSDT ... not found!
[17179570.312000] ACPI: System reset via FADT Reset Register is supported
[17179570.312000] machine_reset = acpi_machine_reset
[17179570.324000] CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
[17179570.324000] Total of 1 processors activated (3462.29 BogoMIPS).
[17179570.324000] ENABLING IO-APIC IRQs
[17179570.324000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179570.468000] Brought up 1 CPUs
[17179570.468000] migration_cost=0
[17179570.468000] NET: Registered protocol family 16
[17179570.468000] EISA bus registered
[17179570.468000] ACPI: bus type pci registered
[17179570.468000] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[17179570.468000] PCI: Not using MMCONFIG.
[17179570.468000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[17179570.468000] PCI: Using configuration type 1
[17179570.468000] Setting up standard PCI resources
[17179570.556000] ACPI: Interpreter enabled
[17179570.556000] ACPI: Using IOAPIC for interrupt routing
[17179570.556000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.556000] PCI: Probing PCI hardware (bus 00)
[17179570.556000] Boot video device is 0000:00:02.0
[17179570.560000] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[17179570.560000] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[17179570.560000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[17179570.560000] PCI: Transparent bridge - 0000:00:1e.0
[17179570.560000] PCI: Bus #02 (-#05) is hidden behind transparent bridge #01 (-#02) (try 'pci=assign-busses')
[17179570.560000] Please report the result to linux-kernel to fix this permanently
[17179570.560000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.564000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[17179570.564000] ACPI: Embedded Controller [EC0] (gpe 28) interrupt mode.
[17179570.568000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
[17179570.568000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 12) *11
[17179570.568000] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 12)
[17179570.572000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 12)
[17179570.572000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 12)
[17179570.572000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled.
[17179570.572000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7 12)
[17179570.572000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 12)
[17179570.572000] ACPI: Power Resource [GFAN] (off)
[17179570.572000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179570.572000] pnp: PnP ACPI init
[17179570.576000] pnp: PnP ACPI: found 13 devices
[17179570.576000] PnPBIOS: Disabled by ACPI PNP
[17179570.576000] PCI: Using ACPI for IRQ routing
[17179570.576000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179570.584000] pnp: 00:07: ioport range 0x25c-0x25d has been reserved
[17179570.584000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[17179570.584000] PCI: Bus 2, cardbus bridge: 0000:01:03.0
[17179570.584000] IO window: 0000d000-0000d0ff
[17179570.584000] IO window: 0000d400-0000d4ff
[17179570.584000] PREFETCH window: 30000000-31ffffff
[17179570.584000] MEM window: 32000000-33ffffff
[17179570.584000] PCI: Bridge: 0000:00:1e.0
[17179570.584000] IO window: d000-dfff
[17179570.584000] MEM window: fe800000-fe8fffff
[17179570.584000] PREFETCH window: 30000000-31ffffff
[17179570.584000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179570.584000] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 169
[17179570.584000] NET: Registered protocol family 2
[17179570.624000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179570.624000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[17179570.624000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[17179570.624000] TCP: Hash tables configured (established 131072 bind 65536)
[17179570.624000] TCP reno registered
[17179570.624000] audit: initializing netlink socket (disabled)
[17179570.624000] audit(1170271301.624:1): initialized
[17179570.624000] VFS: Disk quotas dquot_6.5.1
[17179570.624000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.624000] Initializing Cryptographic API
[17179570.624000] io scheduler noop registered
[17179570.624000] io scheduler anticipatory registered
[17179570.624000] io scheduler deadline registered
[17179570.624000] io scheduler cfq registered (default)
[17179570.624000] isapnp: Scanning for PnP cards...
[17179570.980000] isapnp: No Plug & Play device found
[17179571.004000] Real Time Clock Driver v1.12ac
[17179571.004000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179571.004000] mice: PS/2 mouse device common for all mice
[17179571.004000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179571.004000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.004000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179571.004000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179571.008000] i8042.c: Detected active multiplexing controller, rev 1.1.
[17179571.008000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[17179571.008000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[17179571.008000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[17179571.008000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[17179571.008000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.008000] EISA: Probing bus 0 at eisa.0
[17179571.008000] EISA: Detected 0 cards.
[17179571.008000] TCP bic registered
[17179571.008000] NET: Registered protocol family 1
[17179571.008000] NET: Registered protocol family 8
[17179571.008000] NET: Registered protocol family 20
[17179571.008000] Using IPI No-Shortcut mode
[17179571.008000] ACPI: (supports S0 S3 S4 S5)
[17179571.008000] Freeing unused kernel memory: 308k freed
[17179571.052000] Capability LSM initialized
[17179571.076000] ACPI: Transitioning device [FN00] to D3
[17179571.076000] ACPI: Transitioning device [FN00] to D3
[17179571.076000] ACPI: Fan [FN00] (off)
[17179571.080000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[17179571.080000] ACPI: Processor [CPU1] (supports 8 throttling states)
[17179571.172000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179571.388000] ACPI: Thermal Zone [THRM] (43 C)
[17179571.632000] ICH6: IDE controller at PCI slot 0000:00:1f.1
[17179571.632000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 177
[17179571.632000] ICH6: chipset revision 4
[17179571.632000] ICH6: not 100% native mode: will probe irqs later
[17179571.632000] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
[17179571.632000] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
[17179571.632000] Probing IDE interface ide0...
[17179572.684000] hda: HTS541060G9AT00, ATA DISK drive
[17179575.924000] hdb: ASUS SCB-2424A, ATAPI CD/DVD-ROM drive
[17179576.128000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179576.152000] Probing IDE interface ide1...
[17179578.332000] hda: max request size: 512KiB
[17179578.340000] hda: 117210240 sectors (60011 MB) w/7539KiB Cache, CHS=16383/255/63, UDMA(100)
[17179578.340000] hda: cache flushes supported
[17179578.340000] hda: hda1 hda2 < hda5 hda6 hda7 hda8 > hda3
[17179578.452000] hdb: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179578.452000] Uniform CD-ROM driver Revision: 3.20
[17179579.748000] Probing IDE interface ide1...
[17179579.772000] usbcore: registered new driver usbfs
[17179579.776000] usbcore: registered new driver hub
[17179579.776000] USB Universal Host Controller Interface driver v3.0
[17179579.776000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 185
[17179579.776000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179579.776000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179579.776000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[17179579.776000] uhci_hcd 0000:00:1d.0: irq 185, io base 0x0000e400
[17179579.780000] usb usb1: configuration #1 chosen from 1 choice
[17179579.780000] hub 1-0:1.0: USB hub found
[17179579.780000] hub 1-0:1.0: 2 ports detected
[17179579.836000] ieee1394: Initialized config rom entry `ip1394'
[17179579.968000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 193
[17179579.968000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179579.968000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179579.968000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[17179579.968000] uhci_hcd 0000:00:1d.1: irq 193, io base 0x0000e480
[17179579.968000] usb usb2: configuration #1 chosen from 1 choice
[17179579.968000] hub 2-0:1.0: USB hub found
[17179579.968000] hub 2-0:1.0: 2 ports detected
[17179580.136000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 177
[17179580.136000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179580.136000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179580.136000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[17179580.136000] uhci_hcd 0000:00:1d.2: irq 177, io base 0x0000e800
[17179580.136000] usb usb3: configuration #1 chosen from 1 choice
[17179580.136000] hub 3-0:1.0: USB hub found
[17179580.136000] hub 3-0:1.0: 2 ports detected
[17179580.288000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 201
[17179580.288000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[17179580.288000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[17179580.288000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[17179580.288000] uhci_hcd 0000:00:1d.3: irq 201, io base 0x0000e880
[17179580.288000] usb usb4: configuration #1 chosen from 1 choice
[17179580.288000] hub 4-0:1.0: USB hub found
[17179580.288000] hub 4-0:1.0: 2 ports detected
[17179580.432000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 185
[17179580.432000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179580.432000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179580.432000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[17179580.432000] ehci_hcd 0000:00:1d.7: debug port 1
[17179580.432000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[17179580.432000] ehci_hcd 0000:00:1d.7: irq 185, io mem 0xfeb3bc00
[17179580.436000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179580.436000] usb usb5: configuration #1 chosen from 1 choice
[17179580.436000] hub 5-0:1.0: USB hub found
[17179580.436000] hub 5-0:1.0: 8 ports detected
[17179580.672000] ACPI: PCI Interrupt 0000:01:03.1[B] -> GSI 22 (level, low) -> IRQ 209
[17179580.728000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[209] MMIO=[fe8fe800-fe8fefff] Max Packet=[2048] IR/IT contexts=[4/4]
[17179581.552000] Attempting manual resume
[17179581.596000] ReiserFS: hda7: found reiserfs format "3.6" with standard journal
[17179582.116000] usb 5-7: new high speed USB device using ehci_hcd and address 2
[17179582.780000] ReiserFS: hda7: using ordered data mode
[17179582.804000] ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[17179582.804000] ReiserFS: hda7: checking transaction log (hda7)
[17179582.984000] ReiserFS: hda7: Using r5 hash to sort names
[17179583.004000] usb 5-7: configuration #1 chosen from 1 choice
[17179583.008000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800034db22a]
[17179608.344000] input: PC Speaker as /class/input/input1
[17179613.156000] hw_random hardware driver 1.0.0 loaded
[17179613.268000] Linux agpgart interface v0.101 (c) Dave Jones
[17179613.272000] agpgart: Detected an Intel 915GM Chipset.
[17179613.272000] agpgart: Detected 16124K stolen memory.
[17179613.292000] agpgart: AGP aperture is 256M @ 0xd0000000
[17179613.788000] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 169
[17179613.788000] Yenta: CardBus bridge found at 0000:01:03.0 [1043:1157]
[17179613.868000] sdhci: Secure Digital Host Controller Interface driver, 0.12
[17179613.868000] sdhci: Copyright(c) Pierre Ossman
[17179613.912000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x116eb1, caps: 0xa04713/0x0
[17179613.920000] Yenta: ISA IRQ mask 0x04b8, PCI irq 169
[17179613.920000] Socket status: 30000820
[17179613.920000] Yenta: Raising subordinate bus# of parent bus (#01) from #02 to #05
[17179613.920000] pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
[17179613.920000] cs: IO port probe 0xd000-0xdfff: clean.
[17179613.920000] pcmcia: parent PCI bridge Memory window: 0xfe800000 - 0xfe8fffff
[17179613.920000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x31ffffff
[17179613.952000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[17179613.976000] sdhci: SDHCI controller found at 0000:01:03.2 [1180:0822] (rev 17)
[17179613.976000] ACPI: PCI Interrupt 0000:01:03.2[C] -> GSI 20 (level, low) -> IRQ 217
[17179613.976000] mmc0: SDHCI at 0xfe8ff400 irq 217 DMA
[17179615.160000] 8139too Fast Ethernet driver 0.9.27
[17179615.160000] ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 20 (level, low) -> IRQ 217
[17179615.160000] eth0: RealTek RTL8139 at 0xefabc000, 00:15:f2:c0:b3:64, IRQ 217
[17179615.160000] eth0: Identified 8139 chip type 'RTL-8101'
[17179615.240000] ts: Compaq touchscreen protocol output
[17179615.288000] pccard: CardBus card inserted into slot 0
[17179615.344000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 201
[17179615.344000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[17179615.360000] ath_hal: module license 'Proprietary' taints kernel.
[17179615.360000] ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[17179616.704000] wlan: 0.8.4.2 (0.9.2.1)
[17179617.520000] ath_rate_sample: 1.2 (0.9.2.1)
[17179617.540000] ath_pci: 0.9.4.5 (0.9.2.1)
[17179618.212000] cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x370-0x377
[17179618.212000] cs: IO port probe 0x3e0-0x4ff: excluding 0x400-0x41f 0x4d0-0x4d7
[17179618.212000] cs: IO port probe 0x820-0x8ff: clean.
[17179618.212000] cs: IO port probe 0xc00-0xcf7: clean.
[17179618.212000] cs: IO port probe 0xa00-0xaff: clean.
[17179660.756000] pccard: card ejected from slot 0
[17179671.576000] pccard: CardBus card inserted into slot 0
[17179766.692000] PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
[17179766.692000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 21 (level, low) -> IRQ 169
[17179767.268000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[17179767.272000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[17179767.272000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[17179767.272000] wifi0: mac 7.8 phy 4.5 radio 5.6
[17179767.272000] wifi0: Use hw queue 1 for WME_AC_BE traffic
[17179767.272000] wifi0: Use hw queue 0 for WME_AC_BK traffic
[17179767.272000] wifi0: Use hw queue 2 for WME_AC_VI traffic
[17179767.272000] wifi0: Use hw queue 3 for WME_AC_VO traffic
[17179767.272000] wifi0: Use hw queue 8 for CAB traffic
[17179767.272000] wifi0: Use hw queue 9 for beacons
[17179767.284000] wifi0: Atheros 5212: mem=0x32000000, irq=169
[17179768.532000] lp: driver loaded but no devices found
[17179768.608000] SCSI subsystem initialized
[17179768.632000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179768.632000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179768.648000] Adding 738948k swap on /dev/disk/by-uuid/be486db7-1c65-45fd-bbf2-7f8bbb451a8c. Priority:-1 extents:1 across:738948k
[17179784.832000] NTFS driver 2.1.27 [Flags: R/O MODULE].
[17179784.900000] NTFS volume version 3.1.
[17179787.456000] NTFS volume version 3.1.
[17179787.592000] NTFS volume version 3.1.
[17179791.928000] Asus Laptop ACPI Extras version 0.30
[17179791.928000] unsupported model M9A, trying default values
[17179791.928000] send /proc/acpi/dsdt to the developers
[17179791.948000] ACPI: AC Adapter [AC0] (on-line)
[17179796.580000] pcc_acpi: loading...
[17179796.588000] ACPI: Power Button (FF) [PWRF]
[17179796.588000] ACPI: Sleep Button (CM) [SLPB]
[17179796.588000] ACPI: Lid Switch [LID]
[17179796.620000] ibm_acpi: ec object not found
[17179800.772000] ACPI: Battery Slot [BAT0] (battery absent)
[17179800.800000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[17179800.800000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[17179808.876000] [drm] Initialized drm 1.0.1 20051102
[17179808.892000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 201
[17179808.892000] [drm] Initialized i915 1.5.0 20060119 on minor 0
[17180038.232000] eth0: link down
[17182563.820000] usb 2-2: new low speed USB device using uhci_hcd and address 2
[17182563.992000] usb 2-2: configuration #1 chosen from 1 choice
[17182564.336000] usbcore: registered new driver hiddev
[17182564.352000] input: Logitech Optical USB Mouse as /class/input/input3
[17182564.352000] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-2
[17182564.352000] usbcore: registered new driver usbhid
[17182564.352000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17184528.216000] hdb: status error: status=0x50 { DriveReady SeekComplete }
[17184528.216000] ide: failed opcode was: unknown


页首
 用户资料  
 
2 楼 
 文章标题 :
帖子发表于 : 2007-01-31 22:14 
头像

注册: 2005-08-14 21:55
帖子: 58428
地址: 长沙
送出感谢: 4
接收感谢: 272
在检查分区吧。有ntfs和fat32的分区?


_________________
● 鸣学


页首
 用户资料  
 
3 楼 
 文章标题 :
帖子发表于 : 2007-01-31 23:23 

注册: 2006-11-18 15:40
帖子: 452
送出感谢: 0 次
接收感谢: 0 次
是不是插了移动硬盘,应该是在检查分区


_________________
linux什么最重要?硬件要旧,软件要新!
Ubuntu什么最重要?源要全!网要快!
不是你不明白,是linux变化快
人品也很重要


页首
 用户资料  
 
4 楼 
 文章标题 :
帖子发表于 : 2007-02-02 8:49 

注册: 2006-03-17 13:40
帖子: 147
送出感谢: 0 次
接收感谢: 0 次
没有接移动硬盘,有ntfs和fat32的分区,但我的台式机上也有ntfs的分区,并没有出现这种情况。这个停顿时间至少有有30秒以上


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 4 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 4 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译