不会用K3d擦除可复写光盘

为当前最终发行版之前的所有版本提供支持
回复
nbdxkfq
帖子: 144
注册时间: 2007-01-10 23:56
送出感谢: 0
接收感谢: 0

不会用K3d擦除可复写光盘

#1

帖子 nbdxkfq » 2007-02-24 19:23

我不会用K3d擦除可擦写光盘,教教我,或者告诉我哪里有这方面说明,谢谢具体情况如图

以下是DEBUG信息
System
-----------------------
K3b Version: 0.12.17

KDE Version: 3.5.5
QT Version: 3.3.6
Kernel: 2.6.17-11-generic
Devices
-----------------------
MATSHITA CD-RW CW-8124 DZ15 (/dev/scd0, /dev/sg1) at /media/cdrom0 [CD-R; CD-RW; CD-ROM; DVD-ROM] [DVD-ROM; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R]

Used versions
-----------------------
cdrecord: 2.1.1a03

cdrecord command:
-----------------------
/usr/bin/X11/cdrecord.mmap -v gracetime=2 dev=1,0,0 speed=2 -tao driveropts=burnfree -eject blank=fast -force

cdrecord
-----------------------
/usr/bin/X11/cdrecord: Warning: Running on Linux-2.6.17-11-generic

/usr/bin/X11/cdrecord: There are unsettled issues with Linux-2.5 and newer.
/usr/bin/X11/cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Error trying to open /dev/sg0 exclusively (Permission denied)... retrying in 1 second.
Error trying to open /dev/sg0 exclusively (Permission denied)... retrying in 1 second.
Error trying to open /dev/sg0 exclusively (Permission denied)... retrying in 1 second.
Error trying to open /dev/sg0 exclusively (Permission denied)... retrying in 1 second.
Error trying to open /dev/sg0 exclusively (Permission denied)... retrying in 1 second.
Error trying to open /dev/sg0 exclusively (Permission denied)... retrying in 1 second.
Error trying to open /dev/sg0 exclusively (Permission denied)... retrying in 1 second.
Error trying to open /dev/sg0 exclusively (Permission denied)... retrying in 1 second.
Error trying to open /dev/sg0 exclusively (Permission denied)... retrying in 1 second.
Error trying to open /dev/sg0 exclusively (Permission denied)... retrying in 1 second.
/usr/bin/X11/cdrecord: Permission denied. Cannot open '/dev/sg0'. Cannot open SCSI driver.
/usr/bin/X11/cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root.
/usr/bin/X11/cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
/usr/bin/X11/cdrecord:
/usr/bin/X11/cdrecord: For more information, install the cdrtools-doc
/usr/bin/X11/cdrecord: package and read /usr/share/doc/cdrecord/README.ATAPI.setup .
Cdrecord-Clone 2.01.01a03 (i686-pc-linux-gnu) Copyright (C) 1995-2005 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to <cdrtools@packages.debian.org>.
The original author should not be bothered with problems of this version.
TOC Type: 1 = CD-ROM
附件
Screenshot3.png
光盘信息
Screenshot1.png
Screenshot2.png
上次由 nbdxkfq 在 2007-02-24 19:56,总共编辑 2 次。
头像
Decease
帖子: 834
注册时间: 2006-12-14 20:33
送出感谢: 0
接收感谢: 0

#2

帖子 Decease » 2007-02-24 19:37

确定光盘是可擦除的.
Screenshot1.png是擦除CD..
Tool-FormatDVD RW是擦除DvD
头像
TualatriX
帖子: 359
注册时间: 2006-11-17 20:07
来自: 杭州/宁波
送出感谢: 0
接收感谢: 0
联系:

#3

帖子 TualatriX » 2007-02-24 20:23

我用K3b擦过Aopen的CD-rw,是SONY的刻录机,没碰到什么问题过。楼主可能是硬件方面问题吧。
IMTX:http://imtx.cn/

LDCN(已经关闭):http://linuxdesktop.cn/

Ubuntu Tweak:http://ubuntu-tweak.com/
nbdxkfq
帖子: 144
注册时间: 2007-01-10 23:56
送出感谢: 0
接收感谢: 0

#4

帖子 nbdxkfq » 2007-02-24 20:37

已经解决,是权限问题,要是在中断下用 sudo k3b然后k3b执行之后就能读写了,直接打开应用程序下的K3b就不行,不知道有没有办法不用通过终端,直接打开来就能用呢?谢谢
回复

回到 “老旧版本支持”