当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 10 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : 请高手进来帮我看看我这个错误是怎么回事?
帖子发表于 : 2007-03-30 18:51 

注册: 2007-03-17 15:30
帖子: 170
送出感谢: 0 次
接收感谢: 0 次
这几天总感觉自己的系统有一定的毛病。
今天安装easywine的时候。配置失败 。 然后刚才安装parallels 虚拟工作平台。也是说配置失败。

内容:
[: 141: ==: unexpected operator
Compiling Parallels Workstation 2.2 drivers...
Drivers have been compiled successfully.
/usr/bin/parallels-config: 175: pushd: not found
/usr/bin/parallels-config: 186: popd: not found
Installing drivers...
Starting drivers...
/usr/lib/parallels/autostart/drivers_start: 19: Syntax error: "(" unexpected
Parallels Workstation drivers were successfully configured
and compiled but cannot be started (insmod command failed).
Run 'dmesg' command for more information.
exit: 3: Illegal number: -1


有那位高手能告诉我具体情况?


页首
 用户资料  
 
2 楼 
 文章标题 :
帖子发表于 : 2007-03-30 18:57 
头像

注册: 2006-05-19 21:23
帖子: 1277
送出感谢: 0 次
接收感谢: 0 次
如果parallels-config第一行不是#!/bin/bash,就改成这个!
然后重新再运行parallels-config看看!


_________________
其实我是一个演员!-http://blog.csdn.net/xport/


最后由 xport 编辑于 2007-03-30 19:10,总共编辑了 1 次

页首
 用户资料  
 
3 楼 
 文章标题 :
帖子发表于 : 2007-03-30 19:02 

注册: 2007-03-17 15:30
帖子: 170
送出感谢: 0 次
接收感谢: 0 次
楼上的大哥。请告诉我怎么编辑drivers_start文件? 不好意思。真的一头雾水。


页首
 用户资料  
 
4 楼 
 文章标题 :
帖子发表于 : 2007-03-30 19:09 
头像

注册: 2006-05-19 21:23
帖子: 1277
送出感谢: 0 次
接收感谢: 0 次
不好意思,说错文件了,是sudo gedit /usr/bin/parallels-config...汗~~~!


_________________
其实我是一个演员!-http://blog.csdn.net/xport/


页首
 用户资料  
 
5 楼 
 文章标题 :
帖子发表于 : 2007-03-30 20:15 

注册: 2007-03-17 15:30
帖子: 170
送出感谢: 0 次
接收感谢: 0 次
谢谢大哥指点。但是还有个问题。照你说的去做了。/

Compiling Parallels Workstation 2.2 drivers...
Drivers have been compiled successfully.
Installing drivers...
Starting drivers...
/usr/lib/parallels/autostart/drivers_start: 19: Syntax error: "(" unexpected
Parallels Workstation drivers were successfully configured
and compiled but cannot be started (insmod command failed).
Run 'dmesg' command for more information.

说cannot be started (insmod command failed).
Run 'dmesg' command for more information

information如下。。哎。真的很崩溃。 我电脑easywine安装不了。/别的虚拟工作站也能遇见问题。真是不叫人活了



























[17179569.184000] Linux version 2.6.17-11-generic (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Thu Feb 1 19:52:28 UTC 2007 (Ubuntu 2.6.17-11.35-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[17179569.184000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000003ff70000 (usable)
[17179569.184000] BIOS-e820: 000000003ff70000 - 000000003ff7b000 (ACPI data)
[17179569.184000] BIOS-e820: 000000003ff7b000 - 000000003ff80000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
[17179569.184000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[17179569.184000] BIOS-e820: 00000000fffff000 - 0000000100000000 (reserved)
[17179569.184000] 127MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 262000
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 225280 pages, LIFO batch:31
[17179569.184000] HighMem zone: 32624 pages, LIFO batch:7
[17179569.184000] DMI present.
[17179569.184000] ACPI: RSDP (v000 PTLTD ) @ 0x000f7900
[17179569.184000] ACPI: RSDT (v001 PTLTD CooperSp 0x06040000 LTP 0x00000000) @ 0x3ff760e1
[17179569.184000] ACPI: FADT (v001 HP 3089 0x06040000 PTL 0x00000050) @ 0x3ff7aed2
[17179569.184000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x3ff7afd8
[17179569.184000] ACPI: SSDT (v001 INTEL EISTRef 0x00002000 INTL 0x20021002) @ 0x3ff76111
[17179569.184000] ACPI: DSDT (v001 HP 3089 0x06040000 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x1008
[17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:bf800000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda1 ro quiet splash
[17179569.184000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic"
[17179569.184000] mapped APIC to ffffd000 (0180c000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 1694.743 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179571.016000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179571.016000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179571.052000] Memory: 1029124k/1048000k available (1911k kernel code, 18108k reserved, 1073k data, 308k init, 130496k highmem)
[17179571.052000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179571.132000] Calibrating delay using timer specific routine.. 3392.32 BogoMIPS (lpj=6784645)
[17179571.132000] Security Framework v1.0.0 initialized
[17179571.132000] SELinux: Disabled at boot.
[17179571.132000] Mount-cache hash table entries: 512
[17179571.132000] CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
[17179571.132000] CPU: After vendor identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
[17179571.132000] CPU: L1 I cache: 32K, L1 D cache: 32K
[17179571.132000] CPU: L2 cache: 2048K
[17179571.132000] CPU: After all inits, caps: afe9f9bf 00000000 00000000 00000040 00000180 00000000 00000000
[17179571.132000] Checking 'hlt' instruction... OK.
[17179571.148000] SMP alternatives: switching to UP code
[17179571.148000] Freeing SMP alternatives: 16k freed
[17179571.148000] checking if image is initramfs... it is
[17179571.680000] Freeing initrd memory: 5326k freed
[17179571.680000] ACPI: Core revision 20060707
[17179571.680000] ACPI: Looking for DSDT ... not found!
[17179571.680000] ACPI: setting ELCR to 0200 (from 0ca8)
[17179573.660000] CPU0: Intel(R) Pentium(R) M processor 1.70GHz stepping 06
[17179573.660000] SMP motherboard not detected.
[17179573.660000] Local APIC not detected. Using dummy APIC emulation.
[17179573.660000] Brought up 1 CPUs
[17179573.660000] migration_cost=0
[17179573.660000] NET: Registered protocol family 16
[17179573.660000] EISA bus registered
[17179573.660000] ACPI: bus type pci registered
[17179573.660000] PCI: PCI BIOS revision 2.10 entry at 0xfd943, last bus=2
[17179573.660000] PCI: Using configuration type 1
[17179573.660000] Setting up standard PCI resources
[17179573.680000] ACPI: Interpreter enabled
[17179573.680000] ACPI: Using PIC for interrupt routing
[17179573.680000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179573.680000] PCI: Probing PCI hardware (bus 00)
[17179573.684000] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[17179573.684000] PCI quirk: region 1180-11bf claimed by ICH4 GPIO
[17179573.684000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[17179573.684000] Boot video device is 0000:01:00.0
[17179573.684000] PCI: Transparent bridge - 0000:00:1e.0
[17179573.684000] PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
[17179573.684000] Please report the result to linux-kernel to fix this permanently
[17179573.684000] PCI: Bus #07 (-#0a) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
[17179573.684000] Please report the result to linux-kernel to fix this permanently
[17179573.684000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179573.688000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[17179573.688000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[17179573.688000] ACPI: PCI Interrupt Link [LNKA] (IRQs 5) *10
[17179573.688000] ACPI: PCI Interrupt Link [LNKB] (IRQs 10) *5
[17179573.688000] ACPI: PCI Interrupt Link [LNKC] (IRQs 10) *11
[17179573.688000] ACPI: PCI Interrupt Link [LNKD] (IRQs 11) *3
[17179573.688000] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[17179573.692000] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[17179573.692000] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[17179573.692000] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[17179573.692000] ACPI: Embedded Controller [EC] (gpe 28) interrupt mode.
[17179573.692000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179573.692000] pnp: PnP ACPI init
[17179573.692000] pnp: PnP ACPI: found 8 devices
[17179573.692000] PnPBIOS: Disabled by ACPI PNP
[17179573.692000] PCI: Using ACPI for IRQ routing
[17179573.692000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179573.700000] PCI: Bridge: 0000:00:01.0
[17179573.700000] IO window: 3000-3fff
[17179573.700000] MEM window: d0100000-d01fffff
[17179573.700000] PREFETCH window: d8000000-dfffffff
[17179573.700000] PCI: Bus 3, cardbus bridge: 0000:02:07.0
[17179573.700000] IO window: 00004400-000044ff
[17179573.700000] IO window: 00004800-000048ff
[17179573.700000] PREFETCH window: 50000000-51ffffff
[17179573.700000] MEM window: 56000000-57ffffff
[17179573.700000] PCI: Bus 7, cardbus bridge: 0000:02:07.1
[17179573.700000] IO window: 00004c00-00004cff
[17179573.700000] IO window: 00001400-000014ff
[17179573.700000] PREFETCH window: 52000000-53ffffff
[17179573.700000] MEM window: 58000000-59ffffff
[17179573.700000] PCI: Bridge: 0000:00:1e.0
[17179573.700000] IO window: 4000-4fff
[17179573.700000] MEM window: d0200000-d02fffff
[17179573.700000] PREFETCH window: 50000000-53ffffff
[17179573.700000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179573.700000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[17179573.700000] PCI: setting IRQ 11 as level-triggered
[17179573.700000] ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[17179573.700000] PCI: Setting latency timer of device 0000:02:07.0 to 64
[17179573.700000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[17179573.700000] PCI: setting IRQ 10 as level-triggered
[17179573.700000] ACPI: PCI Interrupt 0000:02:07.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[17179573.700000] PCI: Setting latency timer of device 0000:02:07.1 to 64
[17179573.700000] NET: Registered protocol family 2
[17179573.740000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179573.740000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[17179573.740000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[17179573.740000] TCP: Hash tables configured (established 131072 bind 65536)
[17179573.740000] TCP reno registered
[17179573.740000] Simple Boot Flag at 0x36 set to 0x1
[17179573.740000] audit: initializing netlink socket (disabled)
[17179573.740000] audit(1175256325.740:1): initialized
[17179573.740000] highmem bounce pool size: 64 pages
[17179573.740000] VFS: Disk quotas dquot_6.5.1
[17179573.740000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179573.740000] Initializing Cryptographic API
[17179573.740000] io scheduler noop registered
[17179573.740000] io scheduler anticipatory registered
[17179573.740000] io scheduler deadline registered
[17179573.740000] io scheduler cfq registered (default)
[17179573.740000] isapnp: Scanning for PnP cards...
[17179574.096000] isapnp: No Plug & Play device found
[17179574.116000] Real Time Clock Driver v1.12ac
[17179574.116000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179574.120000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[17179574.120000] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[17179574.120000] mice: PS/2 mouse device common for all mice
[17179574.120000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179574.120000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179574.120000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179574.120000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179574.120000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179574.120000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179574.124000] EISA: Probing bus 0 at eisa.0
[17179574.124000] Cannot allocate resource for EISA slot 1
[17179574.124000] Cannot allocate resource for EISA slot 2
[17179574.124000] Cannot allocate resource for EISA slot 3
[17179574.124000] Cannot allocate resource for EISA slot 4
[17179574.124000] EISA: Detected 0 cards.
[17179574.124000] TCP bic registered
[17179574.124000] NET: Registered protocol family 1
[17179574.124000] NET: Registered protocol family 8
[17179574.124000] NET: Registered protocol family 20
[17179574.124000] Using IPI No-Shortcut mode
[17179574.124000] ACPI: (supports S0 S3 S4 S5)
[17179574.124000] Freeing unused kernel memory: 308k freed
[17179574.348000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179575.296000] Capability LSM initialized
[17179575.324000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[17179575.324000] ACPI: Processor [CPU0] (supports 8 throttling states)
[17179575.328000] ACPI: Invalid passive threshold
[17179575.528000] ACPI: Thermal Zone [THRM] (58 C)
[17179575.808000] ICH4: IDE controller at PCI slot 0000:00:1f.1
[17179575.808000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[17179575.808000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[17179575.808000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[17179575.808000] ICH4: chipset revision 3
[17179575.808000] ICH4: not 100% native mode: will probe irqs later
[17179575.808000] ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:pio, hdb:pio
[17179575.808000] ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:pio, hdd:pio
[17179575.808000] Probing IDE interface ide0...
[17179576.096000] hda: HTS548060M9AT00, ATA DISK drive
[17179576.432000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179576.448000] Probing IDE interface ide1...
[17179577.184000] hdc: UJDA760 DVD/CDRW, ATAPI CD/DVD-ROM drive
[17179577.520000] ide1 at 0x170-0x177,0x376 on irq 15
[17179577.524000] hda: max request size: 512KiB
[17179577.532000] hda: 117210240 sectors (60011 MB) w/7877KiB Cache, CHS=16383/255/63, UDMA(100)
[17179577.532000] hda: cache flushes supported
[17179577.532000] hda: hda1 hda2 < hda5 >
[17179577.592000] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179577.592000] Uniform CD-ROM driver Revision: 3.20
[17179577.924000] usbcore: registered new driver usbfs
[17179577.924000] usbcore: registered new driver hub
[17179577.924000] USB Universal Host Controller Interface driver v3.0
[17179577.928000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
[17179577.928000] PCI: setting IRQ 5 as level-triggered
[17179577.928000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
[17179577.928000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179577.928000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179577.928000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[17179577.928000] uhci_hcd 0000:00:1d.0: irq 5, io base 0x00001800
[17179577.928000] usb usb1: configuration #1 chosen from 1 choice
[17179577.928000] hub 1-0:1.0: USB hub found
[17179577.928000] hub 1-0:1.0: 2 ports detected
[17179577.992000] ieee1394: Initialized config rom entry `ip1394'
[17179578.032000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[17179578.032000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179578.032000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179578.032000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[17179578.032000] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
[17179578.032000] usb usb2: configuration #1 chosen from 1 choice
[17179578.032000] hub 2-0:1.0: USB hub found
[17179578.032000] hub 2-0:1.0: 2 ports detected
[17179578.136000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[17179578.136000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179578.136000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179578.136000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[17179578.136000] uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001840
[17179578.136000] usb usb3: configuration #1 chosen from 1 choice
[17179578.136000] hub 3-0:1.0: USB hub found
[17179578.136000] hub 3-0:1.0: 2 ports detected
[17179578.240000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 7
[17179578.240000] PCI: setting IRQ 7 as level-triggered
[17179578.240000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 7 (level, low) -> IRQ 7
[17179578.240000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179578.240000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179578.240000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[17179578.240000] ehci_hcd 0000:00:1d.7: debug port 1
[17179578.240000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[17179578.240000] ehci_hcd 0000:00:1d.7: irq 7, io mem 0xd0000000
[17179578.244000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179578.244000] usb usb4: configuration #1 chosen from 1 choice
[17179578.244000] hub 4-0:1.0: USB hub found
[17179578.244000] hub 4-0:1.0: 6 ports detected
[17179578.272000] usb 1-2: new low speed USB device using uhci_hcd and address 2
[17179578.348000] ACPI: PCI Interrupt 0000:02:07.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[17179578.408000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[d0201000-d02017ff] Max Packet=[2048] IR/IT contexts=[4/4]
[17179578.524000] Attempting manual resume
[17179578.588000] kjournald starting. Commit interval 5 seconds
[17179578.588000] EXT3-fs: mounted filesystem with ordered data mode.
[17179578.788000] usb 1-2: new low speed USB device using uhci_hcd and address 3
[17179578.960000] usb 1-2: configuration #1 chosen from 1 choice
[17179579.688000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[10cffd000012f30f]
[17179592.260000] Linux agpgart interface v0.101 (c) Dave Jones
[17179592.276000] agpgart: Detected an Intel 855PM Chipset.
[17179592.292000] agpgart: AGP aperture is 256M @ 0xe0000000
[17179592.344000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179592.352000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179592.648000] hw_random: RNG not detected
[17179592.900000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[17179592.900000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[17179593.120000] usbcore: registered new driver hiddev
[17179593.144000] input: Logitech USB Receiver as /class/input/input1
[17179593.144000] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2
[17179593.144000] usbcore: registered new driver usbhid
[17179593.144000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179593.236000] 8139too Fast Ethernet driver 0.9.27
[17179593.248000] Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9d48b1, caps: 0x904713/0x4006
[17179593.276000] ts: Compaq touchscreen protocol output
[17179593.288000] ieee80211_crypt: registered algorithm 'NULL'
[17179593.288000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[17179593.304000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[17179593.304000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[17179593.328000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.2kmprq
[17179593.328000] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[17179593.328000] Driver 'ipw2200' needs updating - please use bus_type methods
[17179593.720000] intel8x0_measure_ac97_clock: measured 55482 usecs
[17179593.720000] intel8x0: clocking to 48000
[17179593.720000] ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[17179593.720000] Yenta: CardBus bridge found at 0000:02:07.0 [103c:3089]
[17179593.848000] Yenta: ISA IRQ mask 0x0018, PCI irq 11
[17179593.848000] Socket status: 30000006
[17179593.848000] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
[17179593.848000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
[17179593.848000] cs: IO port probe 0x4000-0x4fff: clean.
[17179593.848000] pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
[17179593.848000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
[17179593.848000] ACPI: PCI Interrupt 0000:02:07.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[17179593.848000] Yenta: CardBus bridge found at 0000:02:07.1 [103c:3089]
[17179593.976000] Yenta: ISA IRQ mask 0x0018, PCI irq 10
[17179593.976000] Socket status: 30000006
[17179593.976000] Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a
[17179593.976000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
[17179593.976000] cs: IO port probe 0x4000-0x4fff: clean.
[17179593.976000] pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
[17179593.976000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
[17179593.980000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[17179593.980000] eth0: RealTek RTL8139 at 0xf89d8800, 00:12:79:03:14:6d, IRQ 10
[17179593.980000] eth0: Identified 8139 chip type 'RTL-8101'
[17179593.988000] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[17179593.988000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[17179593.988000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[17179594.216000] ipw2200: Radio Frequency Kill Switch is On:
[17179594.216000] Kill switch must be turned off for wireless networking to work.
[17179594.220000] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
[17179594.276000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[17179594.616000] cs: IO port probe 0x100-0x3af: clean.
[17179594.620000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[17179594.620000] cs: IO port probe 0x820-0x8ff: clean.
[17179594.620000] cs: IO port probe 0xc00-0xcf7: clean.
[17179594.620000] cs: IO port probe 0xa00-0xaff: clean.
[17179594.644000] cs: IO port probe 0x100-0x3af: clean.
[17179594.644000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[17179594.644000] cs: IO port probe 0x820-0x8ff: clean.
[17179594.644000] cs: IO port probe 0xc00-0xcf7: clean.
[17179594.648000] cs: IO port probe 0xa00-0xaff: clean.
[17179594.784000] lp: driver loaded but no devices found
[17179594.824000] SCSI subsystem initialized
[17179594.836000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179594.836000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179594.856000] Adding 2409708k swap on /dev/disk/by-uuid/d9ca2495-1bb7-4119-8ba3-64c54d54b350. Priority:-1 extents:1 across:2409708k
[17179594.980000] EXT3 FS on hda1, internal journal
[17179595.328000] NET: Registered protocol family 17
[17179596.352000] NET: Registered protocol family 10
[17179596.352000] lo: Disabled Privacy Extensions
[17179596.352000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[17179596.352000] IPv6 over IPv4 tunneling driver
[17179599.672000] ACPI: AC Adapter [AC] (on-line)
[17179599.720000] ACPI: Battery Slot [BAT0] (battery present)
[17179599.736000] ACPI: Power Button (FF) [PWRF]
[17179599.736000] ACPI: Lid Switch [LID]
[17179599.736000] ACPI: Power Button (CM) [PWRB]
[17179599.736000] ACPI: Sleep Button (CM) [SLPB]
[17179599.768000] ACPI: ACPI Dock Station Driver
[17179599.848000] ibm_acpi: ec object not found
[17179599.884000] pcc_acpi: loading...
[17179600.012000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[17179603.144000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[17179603.148000] [fglrx] Maximum main memory to use for locked dma buffers: 928 MBytes.
[17179603.148000] [fglrx] module loaded - fglrx 8.28.8 [Aug 17 2006] on minor 0
[17179603.180000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
[17179605.612000] [fglrx] Internal AGP support requested, but kernel AGP support active.
[17179605.612000] [fglrx] Have to use kernel AGP support to avoid conflicts.
[17179605.612000] [fglrx] AGP detected, AgpState = 0x1f000217 (hardware caps of chipset)
[17179605.612000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[17179605.612000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[17179605.612000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[17179605.612000] [fglrx] AGP enabled, AgpCommand = 0x1f000314 (selected caps)
[17179605.620000] [fglrx] total GART = 268435456
[17179605.620000] [fglrx] free GART = 252440576
[17179605.620000] [fglrx] max single GART = 252440576
[17179605.620000] [fglrx] total LFB = 128970752
[17179605.620000] [fglrx] free LFB = 122679296
[17179605.620000] [fglrx] max single LFB = 122679296
[17179605.620000] [fglrx] total Inv = 0
[17179605.620000] [fglrx] free Inv = 0
[17179605.620000] [fglrx] max single Inv = 0
[17179605.620000] [fglrx] total TIM = 0
[17179606.032000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179606.032000] apm: overridden by ACPI.
[17179609.504000] Bluetooth: Core ver 2.8
[17179609.504000] NET: Registered protocol family 31
[17179609.504000] Bluetooth: HCI device and connection manager initialized
[17179609.504000] Bluetooth: HCI socket layer initialized
[17179609.632000] Bluetooth: L2CAP ver 2.8
[17179609.632000] Bluetooth: L2CAP socket layer initialized
[17179609.688000] Bluetooth: RFCOMM socket layer initialized
[17179609.688000] Bluetooth: RFCOMM TTY layer initialized
[17179609.688000] Bluetooth: RFCOMM ver 1.7
root@wanmeiti-laptop:/home/wanmeiti#


页首
 用户资料  
 
6 楼 
 文章标题 :
帖子发表于 : 2007-03-30 20:25 
头像

注册: 2006-05-19 21:23
帖子: 1277
送出感谢: 0 次
接收感谢: 0 次
那就再把
/usr/lib/parallels/autostart/drivers_start
/usr/lib/parallels/autostart/drivers_stop
这2个文件也一样拖出去改了!


_________________
其实我是一个演员!-http://blog.csdn.net/xport/


页首
 用户资料  
 
7 楼 
 文章标题 :
帖子发表于 : 2007-03-30 20:25 

注册: 2007-03-17 15:30
帖子: 170
送出感谢: 0 次
接收感谢: 0 次
/usr/lib/parallels/autostart/drivers_start: 19: Syntax error: "(" unexpected

就是这一个错误该怎么解决阿? 我配置easywine的时候也是说

/usr/bin/EasyWine: 1821: Syntax error: "}" unexpected (expecting ")")


那位知道的大哥帮帮忙吧。想弄一个使用一点的linux系统真的是不简单阿。


页首
 用户资料  
 
8 楼 
 文章标题 :
帖子发表于 : 2007-03-30 20:57 

注册: 2007-03-17 15:30
帖子: 170
送出感谢: 0 次
接收感谢: 0 次
谢谢xport大哥。我的parallels搞好了 。真的太感谢了 。但是我想问一下。我这个错误是什么造成的?虽然问题解决了。但是还是想知道问题出在哪里。再次感谢~!


页首
 用户资料  
 
9 楼 
 文章标题 :
帖子发表于 : 2007-03-30 21:03 
头像

注册: 2006-05-19 21:23
帖子: 1277
送出感谢: 0 次
接收感谢: 0 次
Shell脚本执行的兼容性问题,sh与bash是有些不同的!


_________________
其实我是一个演员!-http://blog.csdn.net/xport/


页首
 用户资料  
 
10 楼 
 文章标题 :
帖子发表于 : 2007-03-30 21:14 

注册: 2007-03-17 15:30
帖子: 170
送出感谢: 0 次
接收感谢: 0 次
两个字- 高手`!


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 10 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 4 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译