ubuntu6.10 初学者
由于安装后,显卡(盈通rx1950gt标准版)不能正常工作,所以想到在wiki 里查看到这个贴子:
ATI 显卡安装配置指南( http://wiki.ubuntu.org.cn/BinaryDriverHowto/ATI )
但是当运行到:
2.1. Instructions for 6.10 (Edgy)
* Install the driver provided by ati included in the repositories:
sudo apt-get update
sudo apt-get install xorg-driver-fglrxYou might also want to install a control panel for your graphic card. Please note that I do not recommend it, as it seems to be buggy, and generally doesnt work.
sudo apt-get install fglrx-controlMake sure fglrx is not disabled: gksudo gedit /etc/default/linux-restricted-modules-common
Generate a new set of module dependencies so the fglrx driver starts properly.
sudo depmod -aYou now have to configure xorg to use your graphic card. The aticonfig tool, provided with the driver, will do that for you:
sudo aticonfig --initial
sudo aticonfig --overlay-type=XvATI are well known not to be able to provide correct drivers for their hardware so you will have to deactivate the composite extension in /etc/X11/xorg.conf , otherwise you will get a jerky video display: gksudo gedit /etc/X11/xorg.conf and add the following lines at the end of the file:
Section "Extensions"
Option "Composite" "0"
EndSection
// After making all those modifications, your X server might not want to start again. Don't worry, you can still modify xorg.conf using vim sudo vim /etc/X11/xorg.conf. To enter edit mode press i, to escape press escape, to save type :w and to quit type :q . And to start X again, on the command line type startx. //
后,开机无法进入到图形界面了,只能直接进入到终端里,请高手指点一下。
求助:无法进入图形界面了
版面规则
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
-
- 帖子: 8
- 注册时间: 2007-04-04 22:41
-
- 帖子: 8
- 注册时间: 2007-04-04 22:41
-
- 帖子: 8
- 注册时间: 2007-04-04 22:41
输入:start
显示:not found
输入:sudo dpkg -reconfigure xserver-xorg
显示:
xserver-xorg
dpkg --inf(=dpkg-deb--info)
dpkg --contents(=dpkg-deb--contents)
/usr/sbin/dpkg-reconfigure:xserver-xorg.
输入:sudo cp/etc/X11/Xorg.conf
显示:
cp:missing destination file oper and after '/etc/X11/Xorg.conf'
try 'cp--help'for more information.
输入:backupp/etc/X11/Xorg.conf
显示:backupp command not found
显示:not found
输入:sudo dpkg -reconfigure xserver-xorg
显示:
xserver-xorg
dpkg --inf(=dpkg-deb--info)
dpkg --contents(=dpkg-deb--contents)
/usr/sbin/dpkg-reconfigure:xserver-xorg.
输入:sudo cp/etc/X11/Xorg.conf
显示:
cp:missing destination file oper and after '/etc/X11/Xorg.conf'
try 'cp--help'for more information.
输入:backupp/etc/X11/Xorg.conf
显示:backupp command not found
-
- 帖子: 12
- 注册时间: 2007-04-04 0:25
建议楼主仔细地看一下提示:
1)" And to start X again, on the command line type startx "
So the command could be "startx", not "start"
2) "sudo dpkg--reconfigure xserver-xorg"
So the option for "dpkg" command is "--", please note that it has two minus symbol.
3) cp:missing destination file oper and after '/etc/X11/Xorg.conf'
try 'cp--help'for more information.
So you just type the source file '/etc/X11/xorg.conf', you should type the name for destination file. And if you use command 'cp --help', you could find the direct answer
4) backupp command not found
The prompt is so clear, there is no backupp command.
根据提示来看,楼主的安装是对的,只不过楼主没有做完配置
1)" And to start X again, on the command line type startx "
So the command could be "startx", not "start"
2) "sudo dpkg--reconfigure xserver-xorg"
So the option for "dpkg" command is "--", please note that it has two minus symbol.
3) cp:missing destination file oper and after '/etc/X11/Xorg.conf'
try 'cp--help'for more information.
So you just type the source file '/etc/X11/xorg.conf', you should type the name for destination file. And if you use command 'cp --help', you could find the direct answer
4) backupp command not found
The prompt is so clear, there is no backupp command.
根据提示来看,楼主的安装是对的,只不过楼主没有做完配置
lovely ubuntu