ATI显卡驱动是装上了,但是我的显卡没有被正确识别,怎么办???

为当前最终发行版之前的所有版本提供支持
回复
lix23
帖子: 9
注册时间: 2007-03-12 20:31
送出感谢: 0
接收感谢: 0

ATI显卡驱动是装上了,但是我的显卡没有被正确识别,怎么办???

#1

帖子 lix23 » 2007-04-07 10:38

按照斑竹的帖子装的8.35.5。
但我的X1650XT没有被识别出来呀。
$fglrxinfo:
Xlib: extension "XFree86-DRI" missing on display ":0.0".
display: :0.0 screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.5.1)

xorg.conf信息如下:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection

Section "Files"
EndSection

Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"

# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"

# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Monitor"
Identifier "Generic Monitor"
HorizSync 28.0 - 51.0
VertRefresh 43.0 - 60.0
Option "DPMS"
EndSection

Section "Device"
Identifier "Generic Video Card"
Driver "fglrx"
Option "UseFBDev" "true"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
BusID "PCI:6:0:0"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Mode 0666
EndSection

Section "Extensions"
Option "Composite" "0"
EndSection

Section "ServerFlags"
Option "AIGLX" "off"
EndSection
头像
zhuqin_83
帖子: 10606
注册时间: 2006-05-13 4:02
送出感谢: 0
接收感谢: 7 次
联系:

#2

帖子 zhuqin_83 » 2007-04-07 11:34

1650恐怕不支持的吧?
把Xorg.0.log也贴出来。
HP Pavilion DV6-2064CA: AMD Turion II Ultra Dual-Core Mobile M640, HD4650, 2GBx2 DDR2-800, Seagate 500GB 7200RPM SATA, BD-ROM
DELL UltraSharp 2209WA
Arch64, Testing repo
头像
依寻依然
帖子: 1617
注册时间: 2006-10-31 14:49
送出感谢: 0
接收感谢: 0

#3

帖子 依寻依然 » 2007-04-07 11:41

我的本本上的X1600支持的 :lol:
头像
ubuntu123
帖子: 8
注册时间: 2007-04-06 23:38
来自: 南昌
送出感谢: 0
接收感谢: 0
联系:

#4

帖子 ubuntu123 » 2007-04-07 14:44

Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
........

这说明 "Screen"现在仍然在使用Device "Generic Video Card" ,而不是你新安装的“显卡驱动”,
你首先应该添加一段
Section "Device"
Identifier "my Video Card" #添个你喜欢的名字,用来标识你的"显卡”及其驱动
Driver "xxx" # xxx改变成为你所使用的显卡驱动的名字 ,这是关键的地方,添写错了,可不行,那样的话,就无法正确找到驱动程序,X11就无法启动。
Option "UseFBDev" "true"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
BusID "PCI:6:0:0"
EndSection

然后再该一下下边
Section "Screen"
Identifier "Default Screen"
Device "my Video Card" #使用上面你所创建的新的显卡设备
常常编程,学无止境,苦海泛舟, VC,VB,PHP
回复

回到 “老旧版本支持”