7.04为什么修改不了分辨率了?

为当前最终发行版之前的所有版本提供支持
回复
oopszj
帖子: 161
注册时间: 2006-03-03 19:16
送出感谢: 0
接收感谢: 0

7.04为什么修改不了分辨率了?

#1

帖子 oopszj » 2007-04-22 20:34

下面是我的xorg.conf,想问一下,为什么分辨率还是没有变化,51HZ

代码: 全选

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	Fontpath	"/usr/share/fonts/X11/misc"
	Fontpath	"/usr/share/fonts/X11/cyrillic"
	Fontpath	"/usr/share/fonts/X11/100dpi/:unscaled"
	Fontpath	"/usr/share/fonts/X11/75dpi/:unscaled"
	Fontpath	"/usr/share/fonts/X11/Type1"
	Fontpath	"/usr/share/fonts/X11/100dpi"
	Fontpath	"/usr/share/fonts/X11/75dpi"
	# path to defoma fonts
	Fontpath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load		"i2c"
	Load		"bitmap"
	Load		"ddc"
	Load		"extmod"
	Load		"freetype"
	Load		"glx"
	Load		"int10"
	Load		"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"us"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"	"/dev/input/mice"
	Option		"Protocol"	"ImPS/2"
	Option		"ZAxisMapping"	"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"stylus"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"stylus"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"eraser"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"eraser"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"cursor"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"cursor"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"nVidia Corporation NV18 [GeForce4 MX 4000]"
	Driver		"nvidia"
	Busid		"PCI:1:0:0"
	Option		"AddARGBVisuals"	"True"
	Option		"AddARGBGLXVisuals"	"True"
	Option		"NoLogo"	"True"
EndSection

Section "Monitor"
	Identifier	"1772ED"
	Option		"DPMS"
	HorizSync 30-100
	VertRefresh 50-100
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"nVidia Corporation NV18 [GeForce4 MX 4000]"
	Monitor		"1772ED"
	Defaultdepth	24
	SubSection "Display"
		Depth	1
		Modes		"1280x1024"	"1024x768"	"832x624"	"800x600"	"720x400"	"640x480"	"1x1"
	EndSubSection
	SubSection "Display"
		Depth	4
		Modes		"1280x1024"	"1024x768"	"832x624"	"800x600"	"720x400"	"640x480"	"1x1"
	EndSubSection
	SubSection "Display"
		Depth	8
		Modes		"1280x1024"	"1024x768"	"832x624"	"800x600"	"720x400"	"640x480"	"1x1"
	EndSubSection
	SubSection "Display"
		Depth	15
		Modes		"1280x1024"	"1024x768"	"832x624"	"800x600"	"720x400"	"640x480"	"1x1"
	EndSubSection
	SubSection "Display"
		Depth	16
		Modes		"1280x1024"	"1024x768"	"832x624"	"800x600"	"720x400"	"640x480"	"1x1"
	EndSubSection
	SubSection "Display"
		Depth	24
		Modes		"1280x1024"	"1024x768"	"832x624"	"800x600"	"720x400"	"640x480"	"1x1"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
  screen "Default Screen"
	Inputdevice	"Generic Keyboard"
	Inputdevice	"Configured Mouse"
	Inputdevice	"stylus"	"SendCoreEvents"
	Inputdevice	"cursor"	"SendCoreEvents"
	Inputdevice	"eraser"	"SendCoreEvents"
EndSection

Section "DRI"
	Mode	0666
EndSection
回复

回到 “老旧版本支持”