分页: 1 / 1

如何更改“刚开机”时候的刷新率和分辨率(有进度条的那个屏幕)具体情况请进

发表于 : 2007-05-28 22:39
pcbit
我装好了ubuntu 7.04,已经用了一段时间,最近想用液晶把正在用的菲利普107T(CRT)换下去,
我把刷新率将到了50,分辨率1024x768,关机,换上液晶,开机,

结果机器自检完毕启动系统的时候,屏幕提示超出同步范围(这个时候应该是到了那个黄色进度条的时候)等10秒中左右,
系统进入登录画面,显示器才有显示,(估计这个时候刷新率才是我选的55)

我猜测原因可能是ubuntu启动画面的分辨率和刷新率,与登录系统之后的不一样,
我如何才能更改这个“刚开机”时候的分辨率和刷新律呢?现在我的xorg.conf没有问题,水平和垂直带宽都是按照液晶的指标填写的。进入桌面以后一切正常。


谢谢

发表于 : 2007-05-29 1:14
tommy007
如果你写的真没问题的话,应该没有这个问题才是= =

发表于 : 2007-05-29 6:40
iblicf

发表于 : 2007-05-29 9:10
pcbit
tommy007 写了:如果你写的真没问题的话,应该没有这个问题才是= =
我把xorg.conf贴出来,帮忙看看吧

代码: 全选

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/etc/X11/rgb"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath     "/usr/share/fonts/X11/misc"
	FontPath     "/usr/share/fonts/X11/cyrillic"
	FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/Type1"
	FontPath     "/usr/share/fonts/X11/100dpi"
	FontPath     "/usr/share/fonts/X11/75dpi"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
	FontPath     "/usr/share/fonts/wenquanyi/wqy-bitmapfont"
	FontPath     "/usr/share/fonts/zh_CN/truetype"
EndSection

Section "Extensions"
	Option		"Composite"	"Enable"
EndSection

Section "Module"
	Load  "dbe"
	Load  "GLcore"
	Load  "glx"
	Load  "dri"
	Load  "xtrap"
	Load  "record"
	Load  "extmod"
	Load  "type1"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	#DisplaySize	  310   230	# mm
	Identifier   "Monitor0"
	VendorName   "HSD"
	ModelName    "HannStar T500"
	HorizSync    30.0 - 61.0
	VertRefresh  56.0 - 75.0
	Option	    "DPMS"
	Option "AddARGBGLXVisuals" "True"
EndSection

Section "Device"
	Identifier  "Card0"
	Driver      "nvidia"
	VendorName  "nVidia Corporation"
	BoardName   "NV20 [GeForce3 Ti 200]"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
EndSection

发表于 : 2007-05-29 9:13
pcbit
iblicf 写了:viewtopic.php?t=56556

谢谢你的回复,但是我的情况和他的完全不一样,
我的是开机的时候,有一个黄色进度条的那个屏幕分辨率太高,还有就是关机的时候,也是出现进度条的那个屏幕分辨率太高,所以超出范围,但是到了登录窗口的时候很正常

发表于 : 2007-05-29 23:32
l5110
帮你定一下,不知道,等待高手中

发表于 : 2007-05-30 0:42
freey
修改grup中的menu。list 在你使用的kerner的最后加上vga=你的分辨率。具体看新手区的置顶贴
,我用的是纯平的。viewtopic.php?t=35100

发表于 : 2007-05-30 9:01
pcbit
freey 写了:修改grup中的menu。list 在你使用的kerner的最后加上vga=你的分辨率。具体看新手区的置顶贴
,我用的是纯平的。viewtopic.php?t=35100

哥们,啥也不说了,眼泪哗哗的,非常非常感谢