[问题]还是屏幕刷新率的问题,请教高手

为当前最终发行版之前的所有版本提供支持
回复
yard1984
帖子: 12
注册时间: 2006-11-12 9:00
送出感谢: 0
接收感谢: 0
联系:

[问题]还是屏幕刷新率的问题,请教高手

#1

帖子 yard1984 » 2007-07-14 17:32

编辑/etc/X11/xorg.conf后的内容如下

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
Identifier "nVidia Corporation C51 [GeForce 6150 LE]"
Driver "nvidia"
BusID "PCI:0:5:0"
EndSection

Section "Monitor"
Identifier "PH107E/S/T7"
HorizSync 30-70
VertRefresh 60-100
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation C51 [GeForce 6150 LE]"
Monitor "PH107E/S/T7"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection

Section "DRI"
Mode 0666
EndSection


重启后1024*768下的分辨率只有60,调不到85
头像
烟雨平生
帖子: 103
注册时间: 2006-07-06 16:35
送出感谢: 0
接收感谢: 0
联系:

#2

帖子 烟雨平生 » 2007-07-14 20:43

估计应该是驱动没装好吧,如果你的显卡是集成的,系统虽然可以支持,但是不太好,具体的就是可以用桌面但是刷新率和分辨率不能修改。

至于怎么安装驱动,就得看你的显卡型号了。
yard1984
帖子: 12
注册时间: 2006-11-12 9:00
送出感谢: 0
接收感谢: 0
联系:

#3

帖子 yard1984 » 2007-07-14 22:44

驱动安装好了,nvidia-settings后把分辨率调到1024*768时刷新率竟然是104,重启后还是60,好像刷新率是系统自动设置的
回复

回到 “老旧版本支持”