[已解决]如何设置登录界面的分辨率??(如果大家试成功,请跟帖)

为当前最终发行版之前的所有版本提供支持
回复
leechard_01
帖子: 4
注册时间: 2007-05-29 15:56
送出感谢: 0
接收感谢: 0

[已解决]如何设置登录界面的分辨率??(如果大家试成功,请跟帖)

#1

帖子 leechard_01 » 2007-07-19 20:34

我把分辨率设置为1440*900时,登录界面的分辨率只能达到1152*864,而且还花屏,进入系统后一切正常,且分辨率为1440*900。
清各位高手帮忙解决问题。还有,我在终端里把分辨率设为1024*786,一切都正常。
在这里附上我的xorg.conf,谢谢大家帮忙看下哪里不对

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
Fontpath "/usr/share/fonts/X11/misc"
Fontpath "/usr/share/fonts/X11/cyrillic"
Fontpath "/usr/share/fonts/X11/100dpi/:unscaled"
Fontpath "/usr/share/fonts/X11/75dpi/:unscaled"
Fontpath "/usr/share/fonts/X11/Type1"
Fontpath "/usr/share/fonts/X11/100dpi"
Fontpath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
Fontpath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
Identifier "通用显示卡"
Driver "nvidia"
Busid "PCI:0:13:0"
Option "AddARGBVisuals" "True"
Option "AddARGBGLXVisuals" "True"
Option "NoLogo" "True"
EndSection

Section "Monitor"
Identifier "通用显示器"
Option "DPMS"
Horizsync 30-82
Vertrefresh 56-76
EndSection

Section "Screen"
Identifier "Default Screen"
Device "通用显示卡"
Monitor "通用显示器"
Defaultdepth 24
SubSection "Display"
Depth 24
Modes "1440x900"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
screen "Default Screen"
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
Inputdevice "stylus" "SendCoreEvents"
Inputdevice "cursor" "SendCoreEvents"
Inputdevice "eraser" "SendCoreEvents"
EndSection

Section "DRI"
Mode 0666
EndSection
上次由 leechard_01 在 2007-07-29 12:49,总共编辑 2 次。
leechard_01
帖子: 4
注册时间: 2007-05-29 15:56
送出感谢: 0
接收感谢: 0

#2

帖子 leechard_01 » 2007-07-25 10:07

这个问题我已经解决了:
SubSection "Display"
Depth 24
Modes "1440x900"
这其中的"1440x900" 是设置的分辨率,开机的登录界面按这个分辨率来的,但是达不到这个分辨率后,出现闪屏。
我试着将上面的代码改为
SubSection "Display"
Depth 24
Modes "800x600" "1440x900" (注:800x600一定要在前面,我试过将800x600放在1440x900后,没改变)
就可以了,登录界面的分辨率就为 800x600
这里将800x600换成1024x786也可以,不过我试过我的不行
回复

回到 “老旧版本支持”