[求助] 关于ubuntu 7.04 死机问题, 想请教各位,有什么解决办法阿, 快崩溃了

为当前最终发行版之前的所有版本提供支持
回复
loza
帖子: 48
注册时间: 2007-07-23 15:16
来自: nanjing
送出感谢: 0
接收感谢: 0
联系:

[求助] 关于ubuntu 7.04 死机问题, 想请教各位,有什么解决办法阿, 快崩溃了

#1

帖子 loza » 2007-07-23 15:41

:?

先说一下问题现象:
前天安装了 aiglx 驱动, compiz fusion及 icon,还安装了几个firefox 插件,包括adblock plus, gladder, mediawrap, clipmark。 驱动正常,compiz fusion也能使用,插件也没有问题。

1) 一般平均10分钟左右会死机,一旦死机, ctrl + alt + backspace, ctrl + alt + F1,F2,...., ctrl + alt +del 都没有任何反应,除鼠标能够移动外,只能按电源键强行关机。 很郁闷阿!! 这个不管是用的 metacity 还是 compiz 都一样。

2) 有时 firefox 打开了,一会儿后 firefox就变暗了,出现假死的样子, 然后死机了。 还有就是运行游戏一会儿也死机了。

我的机器的情况:
thinkpad T43, 1g 内存, x300显卡

没使用 fglrx驱动:
charles@charles-laptop:~$ fglrxinfo程序 'fglrxinfo' 尚未安装. 你可以通过输入下面内容安装:
sudo apt-get install xorg-driver-fglrx
请您确认组件'restricted' 已被激活
bash: fglrxinfo:找不到命令

用的是aiglx:
charles@charles-laptop:~$ glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
.........
后面就不贴了。

xorg.conf内容:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
Load "dbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
Identifier "通用显示卡"
Driver "ati"
BusID "PCI:1:0:0"
Option "XAANoOffscreenPixmaps"
Option "AGPMode" "8"
Option "AGPFastWrite" "true"
Option "DisableGLXRootClipping" "true"
Option "AddARGBGLXVisuals" "true"
Option "AllowGLXWithComposite" "true"
Option "EnablePageFlip" "true"
EndSection

Section "Monitor"
Identifier "通用显示器"
Option "DPMS"
HorizSync 28-51
VertRefresh 43-60
EndSection

Section "Screen"
Identifier "Default Screen"
Device "通用显示卡"
Monitor "通用显示器"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
option "AIGLX" "true"
EndSection

Section "DRI"
Mode 0666
EndSection

Section "Extensions"
Option "Composite" "Enable"
EndSection


:shock: 各位帮忙看看阿, 怎么解决这个问题呢?
我不知道提供的这些数据是否已经足够,还需要什么呢? 死机时应该有个记录文件吧,不晓得在哪里?
头像
qianwx
帖子: 730
注册时间: 2006-07-08 14:41
送出感谢: 0
接收感谢: 0

#2

帖子 qianwx » 2007-07-23 21:40

关注中,虽然兄弟你用的是ati,但我的N卡也是如此,你最起码还开出来效果了,我这可是索性就直接死机,貌似这和很多方面有关,3D效果对显卡的支持度,显卡本身驱动在linux中的兼容性似乎都有些关系。。。我AGP版本的那块7600GS就始终无法使用peryl、compiz、compiz-fusion等所有效果
izee
帖子: 661
注册时间: 2007-01-26 13:38
送出感谢: 0
接收感谢: 0
联系:

#3

帖子 izee » 2007-07-24 17:00

楼主是否已经排除掉硬件故障
比如,CPU风扇跟本就没有转了
在出现问题的前一段时间,做了哪些系统配置?
kane_9909
帖子: 88
注册时间: 2007-05-09 14:34
送出感谢: 0
接收感谢: 0

#4

帖子 kane_9909 » 2007-07-24 18:35

lz可以考虑一下使用官方驱动加xgl来开启特效,速度快很多,也很稳定。我的是9700M,BERYL和compiz fusion都试过,后者还要快。
回复

回到 “老旧版本支持”