在内网架了一个Web服务器，用Ubuntu 7.04 Server，用花生壳做动态域名代理，开始的时候装了一个桌面，比较容易安装花生壳客户端，并在桌面的系统-->会话中新增了一个会话，将花生壳客户端启动命令加入，这样花生壳客户端就可以随系统启动而自动启动登录。比较方便。
现在问题是只装了控制台，不准备装桌面，请问如何配置使花生壳也能自启动，另外在控制台如何下载软件并安装，比如下载Webmin。
在Ubuntu7.04 Server控制台如何设置使程序随系统启动而启动。
版面规则
我们都知道新人的确很菜，也喜欢抱怨，并且带有浓厚的Windows习惯，但既然在这里询问，我们就应该有责任帮助他们解决问题，而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享，以人为本，这正是Ubuntu的精神所在。
我们都知道新人的确很菜，也喜欢抱怨，并且带有浓厚的Windows习惯，但既然在这里询问，我们就应该有责任帮助他们解决问题，而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享，以人为本，这正是Ubuntu的精神所在。
-
hongfeng1126
- 帖子： 10
- 注册时间： 2007-07-24 10:14
-
iblicf
- 帖子： 3766
- 注册时间： 2007-01-15 17:15
/etc/rcS.d/README
The scripts in this directory whose names begin with an 'S' are executed
once when booting the system, even when booting directly into single user
mode.
The scripts are all symbolic links whose targets are located in
/etc/init.d/ .
To disable a script in this directory, rename it so that it begins with
a 'K'.
For a more information see /etc/init.d/README.
The following sequence points are defined at this time:
* After the S40 scripts have executed, all local file systems are mounted
and networking is available. All device drivers have been initialized.
* After the S60 scripts have executed, the system clock has been set, NFS
filesystems have been mounted (unless the system depends on the automounter,
which is started later) and the filesystems have been cleaned.
-
hongfeng1126
- 帖子： 10
- 注册时间： 2007-07-24 10:14
是不是这个意思：iblicf 写了：/etc/rcS.d/README
The scripts in this directory whose names begin with an 'S' are executed
once when booting the system, even when booting directly into single user
mode.
The scripts are all symbolic links whose targets are located in
/etc/init.d/ .
To disable a script in this directory, rename it so that it begins with
a 'K'.
For a more information see /etc/init.d/README.
The following sequence points are defined at this time:
* After the S40 scripts have executed, all local file systems are mounted
and networking is available. All device drivers have been initialized.
* After the S60 scripts have executed, the system clock has been set, NFS
filesystems have been mounted (unless the system depends on the automounter,
which is started later) and the filesystems have been cleaned.
在/etc/init.d/下所有以S开头的脚本文件都会在系统启动的时候执行，以K开头的不再随启动而执行。
S40开头的随系统装载而执行，不论网络是否有效，S60开头的脚本在系统时钟设置之后才执行。
英文有点菜，不知道理解的是不是这个意思？