新手的问题

为当前最终发行版之前的所有版本提供支持
回复
bluesky3368
帖子: 34
注册时间: 2007-07-24 18:21
送出感谢: 0
接收感谢: 0

新手的问题

#1

帖子 bluesky3368 » 2007-07-24 18:42

大家好。我上周刚刚装上Ubutu。我的机器配置如下GeForce Go 8600M GT 256MB T7500 2GB 双通道内存。现在的问题是显卡和无线网卡4965agn的驱动都装不上。那位高手知道有什么办法吗?看了好多帖子,无论中文的还是外文的,都不能解决。

还有一个问题,就是启动列表。我贴出来。

# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=0b422260-d9cf-4bb8-855b-bc5de7e7cd76 ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,7)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## ## End Default Options ##

title Ubuntu, kernel 2.6.22-8-386
root (hd0,7)
kernel /boot/vmlinuz-2.6.22-8-386 root=UUID=0b422260-d9cf-4bb8-855b-bc5de7e7cd76 ro quiet splash
initrd /boot/initrd.img-2.6.22-8-386
quiet
savedefault

title Ubuntu, kernel 2.6.22-8-386 (recovery mode)
root (hd0,7)
kernel /boot/vmlinuz-2.6.22-8-386 root=UUID=0b422260-d9cf-4bb8-855b-bc5de7e7cd76 ro single
initrd /boot/initrd.img-2.6.22-8-386

title Ubuntu, kernel 2.6.22-8-generic
root (hd0,7)
kernel /boot/vmlinuz-2.6.22-8-generic root=UUID=0b422260-d9cf-4bb8-855b-bc5de7e7cd76 ro quiet splash
initrd /boot/initrd.img-2.6.22-8-generic
quiet
savedefault

title Ubuntu, kernel 2.6.22-8-generic (recovery mode)
root (hd0,7)
kernel /boot/vmlinuz-2.6.22-8-generic root=UUID=0b422260-d9cf-4bb8-855b-bc5de7e7cd76 ro single
initrd /boot/initrd.img-2.6.22-8-generic

title Ubuntu, kernel 2.6.20-16-generic
root (hd0,7)
kernel /boot/vmlinuz-2.6.20-16-generic root=UUID=0b422260-d9cf-4bb8-855b-bc5de7e7cd76 ro quiet splash
initrd /boot/initrd.img-2.6.20-16-generic
quiet
savedefault

title Ubuntu, kernel 2.6.20-16-generic (recovery mode)
root (hd0,7)
kernel /boot/vmlinuz-2.6.20-16-generic root=UUID=0b422260-d9cf-4bb8-855b-bc5de7e7cd76 ro single
initrd /boot/initrd.img-2.6.20-16-generic

title Ubuntu, kernel 2.6.20-15-generic
root (hd0,7)
kernel /boot/vmlinuz-2.6.20-15-generic root=UUID=0b422260-d9cf-4bb8-855b-bc5de7e7cd76 ro quiet splash
initrd /boot/initrd.img-2.6.20-15-generic
quiet
savedefault

title Ubuntu, kernel 2.6.20-15-generic (recovery mode)
root (hd0,7)
kernel /boot/vmlinuz-2.6.20-15-generic root=UUID=0b422260-d9cf-4bb8-855b-bc5de7e7cd76 ro single
initrd /boot/initrd.img-2.6.20-15-generic

title Ubuntu, memtest86+
root (hd0,7)
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Windows Vista/Longhorn (loader)
root (hd0,0)
savedefault
makeactive
chainloader +1


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda2
title Windows Vista/Longhorn (loader)
root (hd0,1)
savedefault
makeactive
chainloader +1


怎么会有那么多启动选项?

还有倒数第二个是原来装机器自带的隐藏分区,不是完整的系统。能不能在启动列表里不显示呢?
还有就是桌面的硬盘类表里有windows里的隐藏分区和系统盘,怎么才能让这两个不再桌面显示呢?
问题比较多,谢谢大家了
头像
nihui
帖子: 1746
注册时间: 2006-10-21 12:03
来自: Shanghai
送出感谢: 0
接收感谢: 0
联系:

#2

帖子 nihui » 2007-07-24 18:55

11 個項目。。。

因為每升級一次內核,就會多出來兩個。

前面帶有“#”的是注釋文字,沒有用的,只是起說明作用。


倒數第二個

# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Windows Vista/Longhorn (loader)
root (hd0,0)
savedefault
makeactive
chainloader +1

前面也加上注釋“#”即可嘍~

桌面上的硬盤圖標通過 gconf 修改隱藏,不過好像一隱全隱了。。
.

私人空间
附有 Magic Linux 2.1 最新开发日志~


미안하다, 사랑한다


欢迎来 #xfce-cn 中文频道~~
头像
iblicf
帖子: 3766
注册时间: 2007-01-15 17:15
送出感谢: 0
接收感谢: 0

#3

帖子 iblicf » 2007-07-24 18:57

置顶帖子 + 搜索 ,,先自己找答案再问
头像
kukat
帖子: 266
注册时间: 2006-06-14 6:12
送出感谢: 0
接收感谢: 0
联系:

#4

帖子 kukat » 2007-09-09 16:51

我用7.10 gusty tribe 5
自动识别4965agn,可以直接使用。但最多1个小时,就会断网。这应该是个bug,希望在新版本有改进。
8600m gt 可以用envy
wget http://albertomilone.com/ubuntu/nvidia/ ... u8_all.deb
但服务器一直提示500错误

谁有这个deb包,能传上来一份吗?
回复

回到 “老旧版本支持”