fvwm又出现问题？？？救我！！！

[stonethree]

机器配置：
dell latitude l400
cpu: p3700
ram: 128m
hda: 10g
无cdrom、floppy.
有个硬盘转接卡

昨天问了一个相关问题，试用了大家提供的方法，谢谢各位的热心！！
可没有起色！
只好重装，这次完整按装，完了删除gnome,(保留xwindow),先升级到686，安装fvwm
startx可以正常运行，接着装scim，装完了再startx就不行了
卸载fvwm，xwindow是好的，
提示：
xauth: creating new authority file /root/.serverauth.6508

X: warning; process set to priority -1 instead of requested priority 0

X Window System Version 6.8.2 (Ubuntu 6.8.2-77 20051010174523 root@vernadsky.buildd)
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.10 i686 [ELF]
Current Operating System: Linux ubuntu 2.6.12-10-686 #1 Fri Nov 18 12:09:04 UTC 2005 i686
Build Date: 10 October 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.6.12-10-686 (buildd@terranova) (gcc version 3.4.5 20050809 (prerelease) (Ubuntu 3.4.4-6ubuntu8)) #1 Fri Nov 18 12:09:04 UTC 2005
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 4 22:13:54 2005
(==) Using config file: "/etc/X11/xorg.conf"
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o": No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o": No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o": No symbols found
(!!) ATI(0): Invalid horizontal sync pulse timing detected in mode on server entry.
Skipping "/usr/X11R6/lib/modules/libfb.a:fbmmx.o": No symbols found
Synaptics DeviceInit called
SynapticsCtrl called.
Synaptics DeviceOn called
Warning: font renderer for ".pcf" already registered at priority 0
Warning: font renderer for ".pcf.Z" already registered at priority 0
Warning: font renderer for ".pcf.gz" already registered at priority 0
Warning: font renderer for ".snf" already registered at priority 0
Warning: font renderer for ".snf.Z" already registered at priority 0
Warning: font renderer for ".snf.gz" already registered at priority 0
Warning: font renderer for ".bdf" already registered at priority 0
Warning: font renderer for ".bdf.Z" already registered at priority 0
Warning: font renderer for ".bdf.gz" already registered at priority 0
Warning: font renderer for ".pmf" already registered at priority 0
Synaptics DeviceOff called

waiting for X server to shut down

xorg.conf配置
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/CID"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# paths to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
Load "GLcore"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection

Section "Device"
Identifier "ATI Technologies, Inc. Rage Mobility P/M (AGP)"
Driver "ati"
BusID "PCI:1:0:0"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. Rage Mobility P/M (AGP)"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"
EndSection

Section "DRI"
Mode 0666
EndSection

[freeflying]

scim是怎么安装的

[stonethree]

sudo apt-get install language-pack-gnome-zh language-pack-gnome-zh-base language-pack-zh language-pack-zh-base language-support-zh
(如果出现需要输入[Y/n] 或 [y/N] 一律输入 y 并 回车):

sudo apt-get install ttf-arphic-ukai ttf-arphic-uming安装输入法，你可以在SCIM和fcitx输入法中任选一种安装
SCIM:
sudo apt-get install scim scim-modules-socket scim-modules-table scim-pinyin scim-tables-zh scim-input-pad
sudo sh -c " echo 'export XMODIFIERS=@im=SCIM ; export GTK_IM_MODULE="scim" ; scim -d ' > /etc/X11/Xsession.d/95xinput "
sudo chmod +755 /etc/X11/Xsession.d/95xinput

设置LC_ALL和其它属性:
sudo gedit /etc/environment在编辑器里，将内容修改如下:
LANGUAGE="zh_CN:zh:en_US:en"LC_ALL=zh_CN.UTF-8LANG=zh_CN.UTF-8GST_ID3_TAG_ENCODING=GBK保存，关闭编辑器

[eexpress]

local不是一行吧。
先升级到686？从386进去是不是好的。

[stonethree]

local不是一行吧。
先升级到686？从386进去是不是好的。

在386下同样的问题