不能正常进入x系统！
应该是驱动不正确
等一下我把xorg.conf发上来，大家帮忙看看怎么回事！
我以前用 我同事的七彩红 6200的就按照我上述的方式轻松搞定！郁闷，难道又白买啦？为了这个ubuntu才升级我的这个破台式的！高手帮忙看一下为啥！？！
[问题]新入手一块冠盟nvidia GeForce FX 5700LE 128显卡，驱动不了
版面规则
我们都知道新人的确很菜，也喜欢抱怨，并且带有浓厚的Windows习惯，但既然在这里询问，我们就应该有责任帮助他们解决问题，而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享，以人为本，这正是Ubuntu的精神所在。
我们都知道新人的确很菜，也喜欢抱怨，并且带有浓厚的Windows习惯，但既然在这里询问，我们就应该有责任帮助他们解决问题，而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享，以人为本，这正是Ubuntu的精神所在。
-
shaning
- 帖子： 33
- 注册时间： 2007-08-19 10:04
[问题]新入手一块冠盟nvidia GeForce FX 5700LE 128显卡，驱动不了
我使用 系统-->系统管理-->受限驱动管理器 启动使用 ，然后重启！
不能正常进入x系统！
应该是驱动不正确
等一下我把xorg.conf发上来，大家帮忙看看怎么回事！
我以前用 我同事的七彩红 6200的就按照我上述的方式轻松搞定！郁闷，难道又白买啦？为了这个ubuntu才升级我的这个破台式的！高手帮忙看一下为啥！？！
不能正常进入x系统！
应该是驱动不正确
等一下我把xorg.conf发上来，大家帮忙看看怎么回事！
我以前用 我同事的七彩红 6200的就按照我上述的方式轻松搞定！郁闷，难道又白买啦？为了这个ubuntu才升级我的这个破台式的！高手帮忙看一下为啥！？！
-
shaning
- 帖子： 33
- 注册时间： 2007-08-19 10:04
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Device"
Identifier "通用显示卡"
Driver "nvidia"
Busid "PCI:1:0:0"
Option "AddARGBVisuals" "True"
Option "AddARGBGLXVisuals" "True"
Option "NoLogo" "True"
EndSection
Section "Monitor"
Identifier "SyncMaster"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "通用显示卡"
Monitor "SyncMaster"
Defaultdepth 24
SubSection "Display"
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen "Default Screen"
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Module"
Load "glx"
EndSection
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Device"
Identifier "通用显示卡"
Driver "nvidia"
Busid "PCI:1:0:0"
Option "AddARGBVisuals" "True"
Option "AddARGBGLXVisuals" "True"
Option "NoLogo" "True"
EndSection
Section "Monitor"
Identifier "SyncMaster"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "通用显示卡"
Monitor "SyncMaster"
Defaultdepth 24
SubSection "Display"
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen "Default Screen"
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Module"
Load "glx"
EndSection