[其它]用nvidia显卡开特效的各位都来一下,帮忙做一件大家都力所能及的事
- hyy_m
- 帖子: 140
- 注册时间: 2008-02-18 16:25
[其它]用nvidia显卡开特效的各位都来一下,帮忙做一件大家都力所能及的事
能不能帮忙回答下面几个问题(绝对不是技术方面的问题,只是想参考一下大家的配置,我的机8系列的显卡,在开compiz的时候感觉一般操作都不流畅,驱动装了,文件也改过,无果,不知道怎么回事):
1,请问你是用的Xgl还是Xorg?(如果你没碰过Xgl相关的东西,那就是Xorg)
2,你的显卡型号?(如果能附上机器的其他信息更好)用的是源里的驱动还是nvidia官方驱动(官方驱动的版本?)?
3,有没有遇到在firefox下切换标签页会有点卡的问题?如果2秒钟内连续5次最大最小化firefox窗口,会不会有迟钝?
4,3D效果全部都流畅吗?(像我的话立方块很流畅,但是shift switcher很多时候会卡)
5,能否把xorg.conf的内容贴上来供参考?(关键……尽量都贴上来吧)
看着此贴的你应该都有能力,且不用费力气就能帮一下小弟我的忙………所以拜托各位了,感激不尽
1,请问你是用的Xgl还是Xorg?(如果你没碰过Xgl相关的东西,那就是Xorg)
2,你的显卡型号?(如果能附上机器的其他信息更好)用的是源里的驱动还是nvidia官方驱动(官方驱动的版本?)?
3,有没有遇到在firefox下切换标签页会有点卡的问题?如果2秒钟内连续5次最大最小化firefox窗口,会不会有迟钝?
4,3D效果全部都流畅吗?(像我的话立方块很流畅,但是shift switcher很多时候会卡)
5,能否把xorg.conf的内容贴上来供参考?(关键……尽量都贴上来吧)
看着此贴的你应该都有能力,且不用费力气就能帮一下小弟我的忙………所以拜托各位了,感激不尽
- BigSnake.NET
- 帖子: 12522
- 注册时间: 2006-07-02 11:16
- 来自: 廣州
- 联系:
1.Xorg
2.8600GT公版
3.不会
4.全流畅
5..
2.8600GT公版
3.不会
4.全流畅
5..
代码: 全选
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Wed Nov 14 17:10:54 PST 2007
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder3) Wed Sep 12 14:30:30 PDT 2007
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/media/vartmphome/ttf-microsoft-fonts"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
# Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Philips 190CW"
HorizSync 30.0 - 83.0
VertRefresh 55.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600 GT"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "metamodes" "1440x900_60_0 +0+0;"
Option "AllowGLXWithComposite" "True"
Option "AddARGBGLXVisuals" "True"
Option "NoLogo" "True"
SubSection "Display"# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Wed Nov 14 17:10:54 PST 2007
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder3) Wed Sep 12 14:30:30 PDT 2007
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/media/vartmphome/ttf-microsoft-fonts"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
# Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Philips 190CW"
HorizSync 30.0 - 83.0
VertRefresh 55.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600 GT"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "metamodes" "1440x900_60_0 +0+0;"
Option "AllowGLXWithComposite" "True"
Option "AddARGBGLXVisuals" "True"
Option "NoLogo" "True"
SubSection "Display"
Depth 24
Modes "1440x900"
EndSubSection
EndSection
Depth 24
Modes "1440x900"
EndSubSection
EndSection
^_^ ~~~
要理解递归,首先要理解递归。
地球人都知道,理论上,理论跟实际是没有差别的,但实际上,理论跟实际的差别是相当大滴。
要理解递归,首先要理解递归。
地球人都知道,理论上,理论跟实际是没有差别的,但实际上,理论跟实际的差别是相当大滴。
- syrano
- 帖子: 4313
- 注册时间: 2007-10-06 18:40
1.Xorg(N卡都不用或者说不要装xgl)
2.GeForce2 MX/MX 400 (够老吧 )
3.不会
4.基本流畅
5..
2.GeForce2 MX/MX 400 (够老吧 )
3.不会
4.基本流畅
5..
代码: 全选
david@austria:~$ cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Tue Jan 22 19:53:46 PST 2008
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "Files"
FontPath "/usr/share/fonts/wenquanyi/wqy-zenhei/"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
Identifier "nVidia Corporation NV11 [GeForce2 MX/MX 400]"
Driver "nvidia"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation NV11 [GeForce2 MX/MX 400]"
Monitor "Generic Monitor"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
Option "NoLogo"
SubSection "Display"
Depth 24
Modes "nvidia-auto-select"
EndSubSection
EndSection
david@austria:~$
- hyy_m
- 帖子: 140
- 注册时间: 2008-02-18 16:25
- 豬豬
- 帖子: 1216
- 注册时间: 2006-08-30 20:54
- 来自: 廣州
我是路過了很多次,但想貼不想貼,主要原因是我裝驅動的過程很烏龍,亂來硬來才成功的,所以xorg.conf裡可能有很多垃圾項
1.Xorg
2.板載N7050
3.不用分頁,不過試了一下,沒覺得卡
4.和你情况差不多,不過卡的地方也不能說很卡,不刻意盯著看也不會覺得卡
5.
1.Xorg
2.板載N7050
3.不用分頁,不過試了一下,沒覺得卡
4.和你情况差不多,不過卡的地方也不能說很卡,不刻意盯著看也不會覺得卡
5.
代码: 全选
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Wed Jun 13 18:39:30 PDT 2007
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by failsafeDexconf, using
# values from the debconf database and some overrides to use vesa mode.
#
# You should use dexconf or another such tool for creating a "real" xorg.conf
# For example:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
EndSection
Section "Files"
EndSection
Section "Module"
Load "glx"
Load "v4l"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "Monitor"
Identifier "Failsafe Monitor"
Vendorname "Generic LCD Display"
Modelname "AOC H902w"
Horizsync 31.5-56.0
Vertrefresh 56.0 - 65.0
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "1280x768@60" 80.14 1280 1344 1480 1680 768 769 772 795 -hsync +vsync
modeline "1280x720@60" 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync
modeline "1280x800@60" 83.46 1280 1344 1480 1680 800 801 804 828 -hsync +vsync
modeline "1440x900@60" 106.47 1440 1520 1672 1904 900 901 904 932 -hsync +vsync
Gamma 1.0
EndSection
Section "Device"
Identifier "Failsafe Device"
Boardname "NVIDIA GeForce 7 Series"
Busid "PCI:0:18:0"
Driver "nvidia"
Screen 0
Vendorname "NVIDIA"
Option "AddARGBVisuals" "True"
Option "AddARGBGLXVisuals" "True"
Option "NoLogo" "True"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Failsafe Device"
Monitor "Failsafe Monitor"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 1440 900
Modes "1440x900@60" "1280x800@60" "1280x720@60" "1280x768@60" "800x600@60" "800x600@56"
EndSubSection
EndSection
Section "ServerFlags"
EndSection
- hyy_m
- 帖子: 140
- 注册时间: 2008-02-18 16:25
-
- 帖子: 99
- 注册时间: 2008-03-07 6:39
- fortruth
- 帖子: 1795
- 注册时间: 2005-11-06 1:51
- 来自: 七彩云世界
- 联系:
- skylarkwnl
- 帖子: 224
- 注册时间: 2007-06-13 11:32
1.xorg
2.影驰6600标准版128m显存,源里的nvidia-glx-new
3.没有
4.流畅
5.。。。。。如下:
2.影驰6600标准版128m显存,源里的nvidia-glx-new
3.没有
4.流畅
5.。。。。。如下:
代码: 全选
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Wed Sep 12 14:29:35 PDT 2007
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "Files"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "1770ED"
Option "DPMS"
EndSection
Section "Device"
Identifier "nVidia Corporation NV43 [GeForce 6600]"
Driver "nvidia"
Option "AddARGBGLXVisuals" "True"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation NV43 [GeForce 6600]"
Monitor "1770ED"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768" "832x624" "800x600" "720x400" "640x480" "1x1"
EndSubSection
EndSection
- DarkForest
- 帖子: 86
- 注册时间: 2007-12-11 13:16
-
- 帖子: 3
- 注册时间: 2008-03-28 15:13
1.Xorg
2.8800 GTS
3.不会
4.流畅
5.
2.8800 GTS
3.不会
4.流畅
5.
代码: 全选
Section "ServerLayout"
# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "Files"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "DELL 2407WFP"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 76.0
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "DDL T901DB"
HorizSync 30.0 - 80.0
VertRefresh 55.0 - 75.0
EndSection
Section "Device"
Identifier "nVidia Corporation G80 [GeForce 8800 GTS]"
Driver "nvidia"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8800 GTS"
EndSection
Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8800 GTS"
BusID "PCI:3:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation G80 [GeForce 8800 GTS]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "nvidia-auto-select"
EndSubSection
EndSection
Section "Screen"
# Removed Option "TwinView" "0"
# Removed Option "metamodes" "DFP-1: nvidia-auto-select +0+0"
# Removed Option "TwinView" "1"
# Removed Option "metamodes" "DFP-0: nvidia-auto-select +1920+0, DFP-1: nvidia-auto-select +0+0"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "DFP-1"
Option "metamodes" "DFP-1: 1920x1200_60 +0+0"
EndSection
Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "DFP-0: nvidia-auto-select +0+0"
EndSection
- ttand
- 帖子: 1745
- 注册时间: 2005-08-22 14:05
- 来自: 离开北京
Xorg
NVIDIA GF4 MX 440 官方run 96.43.05
没有
算流畅吧
NVIDIA GF4 MX 440 官方run 96.43.05
没有
算流畅吧
代码: 全选
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
错过好多好贴,没占到广告位后悔啊