/var/log/Xorg.0.log (WW)警告(EE)错误
-
- 帖子: 18
- 注册时间: 2008-10-04 23:19
/var/log/Xorg.0.log (WW)警告(EE)错误
我按照网上的方法安装了compizconfig,emerald,fusion-icon。但是却都没有出现3D效果,查看/var/log/Xorg.0.log文件的时候有一下的(EE)错误和(WW)警告
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
(WW) NVIDIA(0):
(WW) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(WW) NVIDIA(0): will be used as the requested mode.
(WW) NVIDIA(0):
(WW) Configured Mouse: No Device specified, looking for one...
请帮忙看一下是怎么回事并帮忙解决一下,谢谢。[/size]
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
(WW) NVIDIA(0):
(WW) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(WW) NVIDIA(0): will be used as the requested mode.
(WW) NVIDIA(0):
(WW) Configured Mouse: No Device specified, looking for one...
请帮忙看一下是怎么回事并帮忙解决一下,谢谢。[/size]
- yq-ysy
- 论坛版主
- 帖子: 4443
- 注册时间: 2008-07-19 12:44
- 来自: 广西(桂)南宁(邕)
Re: /var/log/Xorg.0.log (WW)警告(EE)错误
再用终端下试试命令 compiz --replace 看看有什么错误信息提示?
-
- 帖子: 18
- 注册时间: 2008-10-04 23:19
Re: /var/log/Xorg.0.log (WW)警告(EE)错误
我输入compiz --replace后的 错误信息提示如下面显示:
hj@hj-desktop:~$ compiz --replace
Checking for Xgl: not present.
Detected PCI ID for VGA: 01:00.0 0300: 10de:0110 (rev b2) (prog-if 00 [VGA controller])
Checking for texture_from_pixmap: present.
Checking for non power of two support: present.
Checking for Composite extension: present.
Comparing resolution (1024x768) to maximum 3D texture size (2048): Passed.
Checking for nVidia: present.
Checking for FBConfig: present.
Checking for Xgl: not present.
GConf backend: There is an unsupported value at path /apps/compiz/plugins/scale/allscreens/options/initiate_edge. Settings from this path won't be read. Try to remove that value so that operation can continue properly.
麻烦帮看一下,谢谢
hj@hj-desktop:~$ compiz --replace
Checking for Xgl: not present.
Detected PCI ID for VGA: 01:00.0 0300: 10de:0110 (rev b2) (prog-if 00 [VGA controller])
Checking for texture_from_pixmap: present.
Checking for non power of two support: present.
Checking for Composite extension: present.
Comparing resolution (1024x768) to maximum 3D texture size (2048): Passed.
Checking for nVidia: present.
Checking for FBConfig: present.
Checking for Xgl: not present.
GConf backend: There is an unsupported value at path /apps/compiz/plugins/scale/allscreens/options/initiate_edge. Settings from this path won't be read. Try to remove that value so that operation can continue properly.
麻烦帮看一下,谢谢
-
- 帖子: 18
- 注册时间: 2008-10-04 23:19
Re: /var/log/Xorg.0.log (WW)警告(EE)错误
我输入compiz --replace后,当我按住ctrl+alt+ 鼠标左键时,可以旋转桌面了,但终端接下来显示如下
Attempted to unregister path (path[0] = org path[1] = freedesktop) which isn't registered
Attempted to unregister path (path[0] = org path[1] = freedesktop) which isn't registered
Attempted to unregister path (path[0] = org path[1] = freedesktop) which isn't registered
Attempted to unregister path (path[0] = org path[1] = freedesktop) which isn't registered
Attempted to unregister path (path[0] = org path[1] = freedesktop) which isn't registered
Attempted to unregister path (path[0] = org path[1] = freedesktop) which isn't registered
Attempted to unregister path (path[0] = org path[1] = freedesktop) which isn't registered
Attempted to unregister path (path[0] = org path[1] = freedesktop) which isn't registered
Attempted to unregister path (path[0] = org path[1] = freedesktop) which isn't registered
Attempted to unregister path (path[0] = org path[1] = freedesktop) which isn't registered
Attempted to unregister path (path[0] = org path[1] = freedesktop) which isn't registered
Attempted to unregister path (path[0] = org path[1] = freedesktop) which isn't registered
- yq-ysy
- 论坛版主
- 帖子: 4443
- 注册时间: 2008-07-19 12:44
- 来自: 广西(桂)南宁(邕)
Re: /var/log/Xorg.0.log (WW)警告(EE)错误
按住ctrl+alt+ 鼠标左键时,可以旋转桌面了,说明3D桌面已经成功启动了啊,还有什么问题?
-
- 帖子: 18
- 注册时间: 2008-10-04 23:19
Re: /var/log/Xorg.0.log (WW)警告(EE)错误
现在可以了,非常感谢您。
-
- 帖子: 8
- 注册时间: 2008-11-04 15:37
Re: /var/log/Xorg.0.log (WW)警告(EE)错误
zhou@zhou-desktop:~$ compiz --replace
Checking for Xgl: not present.
Detected PCI ID for VGA:
Checking for texture_from_pixmap: not present.
Trying again with indirect rendering:
Checking for texture_from_pixmap: present.
Checking for non power of two support: present.
Checking for Composite extension: present.
Comparing resolution (1024x768) to maximum 3D texture size (2048): Passed.
Checking for Software Rasterizer: Not present.
Checking for nVidia: not present.
Checking for FBConfig: present.
Checking for Xgl: not present.
/usr/bin/compiz.real (video) - Warn: No 8 bit GLX pixmap format, disabling YV12 image format
我的是这样子。。。。3D没起动。。。显卡装好了。。。。
Xorg.0.log是有一个WW和一个EE这是怎么回事
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 5 14:17:15 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
我起到了compizconfig settings 右上没有什么出现的。。。不知道怎么回事了。。那们大大帮帮忙了
Checking for Xgl: not present.
Detected PCI ID for VGA:
Checking for texture_from_pixmap: not present.
Trying again with indirect rendering:
Checking for texture_from_pixmap: present.
Checking for non power of two support: present.
Checking for Composite extension: present.
Comparing resolution (1024x768) to maximum 3D texture size (2048): Passed.
Checking for Software Rasterizer: Not present.
Checking for nVidia: not present.
Checking for FBConfig: present.
Checking for Xgl: not present.
/usr/bin/compiz.real (video) - Warn: No 8 bit GLX pixmap format, disabling YV12 image format
我的是这样子。。。。3D没起动。。。显卡装好了。。。。
Xorg.0.log是有一个WW和一个EE这是怎么回事
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 5 14:17:15 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
我起到了compizconfig settings 右上没有什么出现的。。。不知道怎么回事了。。那们大大帮帮忙了
- yq-ysy
- 论坛版主
- 帖子: 4443
- 注册时间: 2008-07-19 12:44
- 来自: 广西(桂)南宁(邕)
Re: /var/log/Xorg.0.log (WW)警告(EE)错误
用compiz --replace命令在桌面右上角是没有蓝色图标的,安装运行fusion-icon才有。
你的log没有问题啊。
你的log没有问题啊。
-
- 帖子: 8
- 注册时间: 2008-11-04 15:37
Re: /var/log/Xorg.0.log (WW)警告(EE)错误
fusion-icon这个怎么安装和怎么起动。。。
- yq-ysy
- 论坛版主
- 帖子: 4443
- 注册时间: 2008-07-19 12:44
- 来自: 广西(桂)南宁(邕)
-
- 帖子: 8
- 注册时间: 2007-01-23 11:11
Re: /var/log/Xorg.0.log (WW)警告(EE)错误
我的无法启动3D,log里有两个警告
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
(WW) "dri2" will not be loaded unless you've specified it to be loaded elsewhere.
在终端里运行 compiz --replace输出如下:
Checking for Xgl: not present.
Detected PCI ID for VGA:
Checking for texture_from_pixmap: present.
Checking for non power of two support: present.
Checking for Composite extension: present.
Comparing resolution (1280x800) to maximum 3D texture size (8192): Passed.
Checking for Software Rasterizer: Not present.
Checking for nVidia: present.
Checking for FBConfig: present.
Checking for Xgl: not present.
/usr/bin/compiz.real (video) - Warn: No 8 bit GLX pixmap format, disabling YV12 image format
请高手指教,谢谢~!
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
(WW) "dri2" will not be loaded unless you've specified it to be loaded elsewhere.
在终端里运行 compiz --replace输出如下:
Checking for Xgl: not present.
Detected PCI ID for VGA:
Checking for texture_from_pixmap: present.
Checking for non power of two support: present.
Checking for Composite extension: present.
Comparing resolution (1280x800) to maximum 3D texture size (8192): Passed.
Checking for Software Rasterizer: Not present.
Checking for nVidia: present.
Checking for FBConfig: present.
Checking for Xgl: not present.
/usr/bin/compiz.real (video) - Warn: No 8 bit GLX pixmap format, disabling YV12 image format
请高手指教,谢谢~!
- yq-ysy
- 论坛版主
- 帖子: 4443
- 注册时间: 2008-07-19 12:44
- 来自: 广西(桂)南宁(邕)
Re: /var/log/Xorg.0.log (WW)警告(EE)错误
dir2有可能是你的/etc/X11/xorg.conf文件里一个自定义的选项,把它删除或加#号屏蔽掉试试。magicbiao 写了:我的无法启动3D,log里有两个警告
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
(WW) "dri2" will not be loaded unless you've specified it to be loaded elsewhere.
请高手指教,谢谢~!
-
- 帖子: 8
- 注册时间: 2007-01-23 11:11
Re: /var/log/Xorg.0.log (WW)警告(EE)错误
试过了楼上的,也不行。
- yq-ysy
- 论坛版主
- 帖子: 4443
- 注册时间: 2008-07-19 12:44
- 来自: 广西(桂)南宁(邕)
Re: /var/log/Xorg.0.log (WW)警告(EE)错误
你用的是nvidia显卡,用envyng换个低版本的驱动试试。
-
- 帖子: 8
- 注册时间: 2008-11-04 15:37
Re: /var/log/Xorg.0.log (WW)警告(EE)错误
我可以用3D了。。不过开了3D后那个窗口是白的。。。显示不好。。不知道怎么回事