当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 3 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : 3D效果为什么不能自启动?
帖子发表于 : 2009-03-29 19:57 

注册: 2009-03-28 21:45
帖子: 3
送出感谢: 0 次
接收感谢: 0 次
我的是8.10 compiz是 0.7.8的
按照置顶帖子安装的 可是开机不能自启动任何3D效果
这是我的Xorg.0.log 就看到这一个错误(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/X11/cyrillic".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/X11/cyrillic").
我个人认为是缺少一个 fonts.dir文件 可是不知道这个是什么文件 就建立了一个空白的文件 建好后没错误了 可是还不能自启动3D效果
求大虾们帮忙阿 谢谢了

X.Org X Server 1.5.2
Release Date: 10 October 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-19-server i686 Ubuntu
Current Operating System: Linux erfen-laptop 2.6.27-14-generic #1 SMP Fri Mar 13 18:00:20 UTC 2009 i686
Build Date: 09 March 2009 10:48:54AM
xorg-server 2:1.5.2-2ubuntu3.1 (buildd@rothera.buildd)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 29 19:21:50 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(**) | |-->Device "Configured Video Device"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/X11/cyrillic".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/X11/cyrillic").
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d9a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 9

(--) PCI:*(0@1:0:0) nVidia Corporation GeForce 8400M GS rev 161, Mem @ 0xfd000000/0, 0xe0000000/0, 0xfa000000/0, I/O @ 0x0000df00/0, BIOS @ 0x????????/131072
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(WW) "dri2" will not be loaded unless you've specified it to be loaded elsewhere.
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded by default.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) LoadModule: "glx"

(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 180.11 Wed Nov 26 11:23:16 PST 2008
(II) Loading extension GLX
(II) LoadModule: "extmod"

(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"

(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "freetype"

(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "record"

(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "dri"

(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"

(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 180.11 Wed Nov 26 11:00:06 PST 2008
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"

(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"

(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 8400M GS (G86M) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 262144 kBytes
(--) NVIDIA(0): VideoBIOS: 60.86.45.00.10
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 8400M GS at PCI:1:0:0:
(--) NVIDIA(0): AUO (DFP-0)
(--) NVIDIA(0): AUO (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): AUO (DFP-0): Internal Dual Link LVDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(==) NVIDIA(0):
(==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) NVIDIA(0): will be used as the requested mode.
(==) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 800
(--) NVIDIA(0): DPI set to (108, 106); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) NVIDIA(0): enough to receive ACPI display change hotkey events.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"

(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 2.0.99
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Configuring as mouse
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) config/hal: Adding input device AlpsPS/2 ALPS GlidePoint
(II) LoadModule: "synaptics"

(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 0.15.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) Synaptics touchpad driver version 0.15.2
(II) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
(II) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
(**) Option "Device" "/dev/input/event12"
(--) AlpsPS/2 ALPS GlidePoint touchpad found
(**) AlpsPS/2 ALPS GlidePoint: always reports core events
(II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
(II) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
(II) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
(--) AlpsPS/2 ALPS GlidePoint touchpad found
(II) config/hal: Adding input device PS/2 Mouse
(**) PS/2 Mouse: always reports core events
(**) PS/2 Mouse: Device: "/dev/input/event11"
(II) PS/2 Mouse: Found x and y relative axes
(II) PS/2 Mouse: Found 3 mouse buttons
(II) PS/2 Mouse: Configuring as mouse
(II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
(**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) AT Translated Set 2 keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "cn"
(**) AT Translated Set 2 keyboard: xkb_layout: "cn"
(II) config/hal: Adding input device USB Mouse
(**) USB Mouse: always reports core events
(**) USB Mouse: Device: "/dev/input/event2"
(II) USB Mouse: Found x and y relative axes
(II) USB Mouse: Found 3 mouse buttons
(II) USB Mouse: Configuring as mouse
(II) XINPUT: Adding extended input device "USB Mouse" (type: MOUSE)
(**) USB Mouse: YAxisMapping: buttons 4 and 5
(**) USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event8"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Video Bus: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) Video Bus: xkb_model: "pc105"
(**) Option "xkb_layout" "cn"
(**) Video Bus: xkb_layout: "cn"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event7"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Video Bus: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) Video Bus: xkb_model: "pc105"
(**) Option "xkb_layout" "cn"
(**) Video Bus: xkb_layout: "cn"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Video Bus: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) Video Bus: xkb_model: "pc105"
(**) Option "xkb_layout" "cn"
(**) Video Bus: xkb_layout: "cn"
AUDIT: Sun Mar 29 19:21:55 2009: 7376 X: client 4 rejected from local host ( uid=0 gid=0 pid=7404 )
AUDIT: Sun Mar 29 19:22:01 2009: 7376 X: client 4 rejected from local host ( uid=1000 gid=0 pid=7412 )
AUDIT: Sun Mar 29 19:22:01 2009: 7376 X: client 4 rejected from local host ( uid=1000 gid=0 pid=7413 )
AUDIT: Sun Mar 29 19:22:01 2009: 7376 X: client 4 rejected from local host ( uid=1000 gid=0 pid=7414 )


页首
 用户资料  
 
2 楼 
 文章标题 : Re: 3D效果为什么不能自启动?
帖子发表于 : 2009-03-29 21:18 
头像

注册: 2008-07-19 12:44
帖子: 3437
地址: 广西(桂)南宁(邕)
送出感谢: 0 次
接收感谢: 76
不关那个ww的事,“开机不能自启动任何3D效果”——开机后能手动启动3d,说明驱动没问题了。
也许只是“会话”没有设置好。


_________________
一善鱼 yq-ysy@163.com

音频数字工作站 Ardour 4 初学者教程  影视特效3D动画 Blender 2.5~2.6 完全教程  图像处理 Krita 3 数字绘画入门


页首
 用户资料  
 
3 楼 
 文章标题 : Re: 3D效果为什么不能自启动?
帖子发表于 : 2009-03-30 10:49 
头像

注册: 2009-03-22 8:41
帖子: 57
送出感谢: 0 次
接收感谢: 0 次
点击任务栏“系统”-“首选项”-“会话”,在弹出的“添加启动程序”里,
“名称”随便输入;“命令”输入“fusion-icon”;“注释”随便输入;
点击“确定”后,就能在启动电脑和Ubuntu时自动启动3D桌面效果了。


_________________
UBUNTU的一些基本特效
http://v.youku.com/v_show/id_XMTMwNDE3NjEy.html
代码:
apt-get moo

代码:
aptitude moo
aptitude moo -v
aptitude moo -vv
aptitude moo -vvv
aptitude moo -vvvv
aptitude moo -vvvvv
aptitude moo -vvvvvv


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 3 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 2 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译