开启3D后显卡刷新率问题

GnomeShell/Unity/Beryl/AiGLX/XGL/Compiz Fusion
回复
loveta0818
帖子: 7
注册时间: 2010-03-04 15:00
送出感谢: 0
接收感谢: 0

开启3D后显卡刷新率问题

#1

帖子 loveta0818 » 2010-03-30 9:25

开启3D后显卡刷新率不正确每次开机都要设置一下 显卡是nv7300 显示器17的 驱动是用envyng安装的最新的 谢谢
loveta0818
帖子: 7
注册时间: 2010-03-04 15:00
送出感谢: 0
接收感谢: 0

Re: 开启3D后显卡刷新率问题

#2

帖子 loveta0818 » 2010-03-30 12:56

谁 知道啊 谢谢啊 请告诉小弟一下吧
loveta0818
帖子: 7
注册时间: 2010-03-04 15:00
送出感谢: 0
接收感谢: 0

Re: 开启3D后显卡刷新率问题

#3

帖子 loveta0818 » 2010-03-30 16:27

谢谢各位了 小弟我是真的不知道怎么解决了 [/b][/i][/u][/u][/i][/b]
nowing
帖子: 1
注册时间: 2010-04-06 12:30
送出感谢: 0
接收感谢: 0

Re: 开启3D后显卡刷新率问题

#4

帖子 nowing » 2010-04-06 12:32

希望刷新率为100hz,但是“显示”里无法设置,没有100hz的选项。于是由:
gtf 1024 768 100
命令得到一行:
ModeLine "1024x768@100" 113.31 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
加入到Section "Monitor"小节,最后修改的/etc/X11/xorg.conf如下:

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder75) Sun Nov 8 21:53:04 PST 2009

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Sun Nov 8 21:50:38 PST 2009

Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "ServerFlags"
Option "Xinerama" "0"
EndSection

Section "InputDevice"

# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "CRT-0"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
ModeLine "1024x768@100" 113.31 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
Option "DPMS"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce FX 5200"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
# Option "metamodes" "1024x768@100 +0+0; nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
Modes "1024x768@100" "1024x768@100"
EndSubSection
EndSection
回复

回到 “桌面特效”