Ubuntu中文论坛

Conky: /home/singyu20/.conkyrc: 22: no such configuration: 'border_margin'
Conky: desktop window (22000ad) is subwindow of root window (b9)
Conky: window type - override
Conky: drawing to created window (0x3c00001)
Conky: drawing to double buffer
中文和天气及EMAIL都弄好了，只是不能开机自动启动
终端命令启动缓慢，出现上述错误，强行关闭终端会导致conky黑屏一会儿

background no
cpu_avg_samples 2
net_avg_samples 2
out_to_console no
use_xft yes
xftfont Sans:size=8
own_window_transparent no
xftalpha 0.8
mail_spool $MAIL
update_interval 1
own_window yes
own_window_transparent yes
own_window_hints undecorated,below,skip_taskbar
own_window_type override
double_buffer yes
minimum_size 260 5
maximum_width 400
draw_shades no
draw_outline no
draw_borders no
stippled_borders no
border_margin 4
border_width 1
default_color white
default_shade_color white
default_outline_color white
gap_x 10
gap_y 40
alignment top_left
use_spacer none
no_buffers yes
uppercase no

TEXT
${color white}SYSTEM ${hr 1}${color}

Hostname: $alignr$nodename
Kernel: $alignr$kernel
Uptime: $alignr$uptime
Temp: ${alignr}${acpitemp}°C

CPU: ${alignr}${freq} MHz
Processes: ${alignr}$processes ($running_processes running)
Load: ${alignr}$loadavg
CPU1 ${alignr}${cpu cpu1}%
${cpubar 4 cpu1}
CPU2 ${alignr}${cpu cpu2}%
${cpubar 4 cpu2}
Ram ${alignr}$mem / $memmax ($memperc%)
${membar 4}
swap ${alignr}$swap / $swapmax ($swapperc%)
${swapbar 4}

Highest CPU $alignr CPU% MEM%
${top name 1}$alignr${top cpu 1}${top mem 1}
${top name 2}$alignr${top cpu 2}${top mem 2}
${top name 3}$alignr${top cpu 3}${top mem 3}

Highest MEM $alignr CPU% MEM%
${top_mem name 1}$alignr${top_mem cpu 1}${top_mem mem 1}
${top_mem name 2}$alignr${top_mem cpu 2}${top_mem mem 2}
${top_mem name 3}$alignr${top_mem cpu 3}${top_mem mem 3}

${color white}FILE SYSTEM ${hr 1}${color}
Root: ${alignr}${fs_free /} / ${fs_size /}
${fs_bar 4 /}
Home: ${alignr}${fs_free /home} / ${fs_size /home}
${fs_bar 4 /home}

${color white}NETWORK ${hr 1}${color}
Down ${downspeed ppp0} k/s ${alignr}Up ${upspeed ppp0} k/s
${downspeedgraph ppp0 25,107} ${alignr}${upspeedgraph ppp0 25,107}
Total ${totaldown ppp0} ${alignr}Total ${totalup ppp0}

${color white}WEATHER ${hr 1}${color}
${execi 3600 python ~/conkyrc/conkyForecast.py --location=CHXX0019 --datatype=CN}
${font Weather:size=44}${color gold}${execi 3600 python ~/conkyrc/conkyForecast.py --location=CHXX0019 --datatype=WF}${font}${color}${voffset -20}${offset 18}${execi 3600 python ~/conkyrc/conkyForecast.py --location=CHXX0019 --datatype=CC}${offset 10}${execi 3600 python ~/conkyrc/conkyForecast.py --location=CHXX0019 --datatype=HT}${offset 10}${execi 3600 python ~/conkyrc/conkyForecast.py --location=CHXX0019 --datatype=WS} ${font Arrows:size=10}${execi 3600 python ~/conkyrc/conkyForecast.py --location=CHXX0019 --datatype=BF}$font
${offset 60}Sol: ${color}${execi 3600 python ~/conkyrc/conkyForecast.py --location=CHXX0019 --datatype=SR}-${execi 3600 python ~/conkyrc/conkyForecast.py --location=CHXX0019 --datatype=SS}
${font Weather:size=26}${execi 3600 python ~/conkyrc/conkyForecast.py --location=CHXX0019 --datatype=WF --startday=1 --endday=4 --spaces=1}${font}
${execi 3600 python ~/conkyrc/conkyForecast.py --location=CHXX0019 --datatype=HT --startday=1 --endday=4 --spaces=11}

${color white}E-MAIL ${hr 1}${color}
You have ${color red}${texeci 1800 perl ~/conkyrc/.check_gmail.sh} ${color}new mail(s)

Conky: /home/singyu20/.conkyrc: 22: no such configuration: 'border_margin'

它已经告诉你了，没有border_margin参数，应该改成 border_inner_margin 4，自己man一下就知道

adagio 写了：

Conky: /home/singyu20/.conkyrc: 22: no such configuration: 'border_margin'

它已经告诉你了，没有border_margin参数，应该改成 border_inner_margin 4，自己man一下就知道

谢谢，这个问题解决了
Conky: desktop window (1a000ad) is subwindow of root window (b9)
Conky: window type - override
Conky: drawing to created window (0x4a00001)
Conky: drawing to double buffer
这几个再请教一下，我基础不好，英文也比较烂，哈哈

其他都是正常的程序输出，别理它

adagio 写了：其他都是正常的程序输出，别理它

大哥，不正常啊
1.不能开机自动启动----我脚本没问题的
2.运行conky之后关闭终端导致conky黑屏2分钟

为什么要用终端？用CTRL+F2，在里面打上“conky"(无引号），即可。

shichix 写了：为什么要用终端？用CTRL+F2，在里面打上“conky"(无引号），即可。

没用啊，这是什么快捷键，我的没反映啊

ALT+F2吧，我cairo-dock用Ctrl+F2来运行程序。

shichix 写了：

有意思，确实看不到那些不想看到的了，哈哈