当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 4 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : 求救请教Xgl与aiglx+nvidia Geforce go 6100显卡,卡死现像(从beryl开始到现在)
帖子发表于 : 2007-04-15 9:20 

注册: 2006-12-05 15:34
帖子: 29
送出感谢: 0 次
接收感谢: 0 次
以前我是用的xgl,因为CPU占用太高现在改用aiglx,结果CPU是降下来了,但是机器总会出现“死屏”现象,后台一切正常,放歌也不卡,是AMD Turion64 X2 TL-50的CPU, 只是如果死屏现死几秒后恢复正常那么CPU可以看到CPU在"死屏“的时候占用相当高几本上是一个CPU,如果不恢复正常CPU也会在10秒左右降回正常,而且关键是这种情况下按任何一个键都没有反应, (只有关机电源按扭有反应,所以,我把电源管理设置成“按下电源按扭直接关机”这样才能保证我的正常关机,当然一按关机键退出X后键盘又恢复正常,此时按alt+ctrl+del 关机变重启,呵呵

请问我该怎么办啊?美好的东东就在眼前,就从来没有放心使用过

我的电脑型号是 清华同方K431 C51主板,nForce 410/430 ,显卡 Geforce go 6100

我敢保证我的xorg.conf配置是严格按照beryl wiki上写的来的,而且使用过程中没有任何错误

下面是我的xorg.conf

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Thu Nov 9 17:55:20 PST 2006

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection

Section "Files"

# path to defoma fonts
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "dri"
Load "dbe"
Load "glx"
Load "int10"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"

# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"

# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Monitor"
Identifier "Generic Monitor"
HorizSync 28.0 - 51.0
VertRefresh 43.0 - 60.0
Option "DPMS"
EndSection

Section "Device"
Identifier "Generic Video Card"
Driver "nvidia"
Option "AddARGBGLXVisuals" "True"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x768" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Mode 0666
EndSection


页首
 用户资料  
 
2 楼 
 文章标题 :
帖子发表于 : 2007-04-15 9:22 

注册: 2006-12-05 15:34
帖子: 29
送出感谢: 0 次
接收感谢: 0 次
补充几句,我现在用的是feisty, 不管是以前的edgy,还是以前的beryl,还是svn的beryl ,以及是9631的nv驱运还是9742的显卡驱动,以及刚出来那个显卡驱动,都会出来这种让人非常 头疼的现象,本来以为更新就能解决,可都差不多,半年了,还是这样,真的没有办法啊:(

??


_________________
清华同方K431-02 Ubuntu 7..04 AMD TL-50 nForce 410/430 Geforce Go 6100


页首
 用户资料  
 
3 楼 
 文章标题 :
帖子发表于 : 2007-04-15 9:27 
头像

注册: 2007-04-11 10:39
帖子: 319
送出感谢: 0 次
接收感谢: 0 次
同问
我的也有这个问题


页首
 用户资料  
 
4 楼 
 文章标题 :
帖子发表于 : 2007-04-15 23:34 

注册: 2006-12-05 15:34
帖子: 29
送出感谢: 0 次
接收感谢: 0 次
如果没有能回答这个问题的,就请有同样的问题来mark一下嘛,
不敢炫起来,真是遗憾 :cry:


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 4 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:Google [Bot] 和 3 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译