终于刻盘安装成功了!不容易啊,因为硬盘安装总是失败,找不到我的SATA硬盘。
顺利连上网,然后装上xorg、gdm、gnome,还有xf86-video-ati,因为我是ATI 2400 PRO显卡
然后在hwd -xa的基础上把xorg.conf改成了如下样子:
代码: 全选
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
# Serial Mouse not detected
# USB Mouse not detected
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/cyrillic"
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "drm"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "freetype"
Load "record"
# Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "SendCoreEvents" "true"
EndSection
# Auto-generated by Archie mkxcfg
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 30.0 - 83.0 # Warning: This may fry old Monitors
VertRefresh 55.0 - 75.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
# Auto-generated by Archie mkxcfg
Section "Device"
Identifier "ATI2400PRO"
Driver "radeon"
VendorName "All"
BoardName "All"
Option "XAANoOffscreenPixmaps" "true"
Option "ColorTiling" "on"
Option "AccelMethal" "EXA"
EndSection
Section "Screen"
Identifier "Screen0"
Device "ATI2400PRO"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1208x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
Group "video"
EndSection
好了,进去了,终于看见可爱的gnome,一切都挺好是不?等等等等……,突然发现:
第1个问题:用普通用户登陆X,然后打开FF没有连接,就是说连不上网,可是在TTY下用root登陆,再pppoe-start已经显示链接成功的,而且可以pacman -Syu升级的,说明网络肯定是连通的啊!晕啊,看wiki说要想听声还要加入“audio”组,当时就纳闷了,不过我用ubuntu就知道用sudo要加入“sudoer”组,莫非这个arch里普通用户要上网还要加入个什么“internet”组不成?
望解答……
第2个问题:普通用户登陆X以后,如果我再“CTRL+ALT+F1”切换到终端,就发现终端屏幕字体变成全部黑底绿色文字的,类似显示不正常的样子,而且按“CTRL+ALT+F7”想切换回X就不行了,显示器显示“超出显示范围”!我倒啊!刚才还在gnome折腾的,很正常啊,为啥切到终端再切回来就“超出显示范围”了呢?
想破头也不懂……
第3个问题:这个是目前最严重的,我鬼使神差的又pacman -Syu 一下,他说有新的xorg-server-1.5.3-2,问我要生不生?废话!有新版我为啥不生?
按下Y……,等他生出来了,我就reboot,再输入gdm看看……
哇!蓝屏!
有没有搞错?
以下是/var/log/Xorg.0.log的内容:
代码: 全选
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux Arch.Von 2.6.27-ARCH #1 SMP PREEMPT Fri Nov 28 10:56:24 UTC 2008 i686
Build Date: 09 November 2008 07:16:27PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec 1 21:35:53 2008
(==) Using config file: "/etc/X11/xorg.conf"
Parse error on line 16 of section Files in file /etc/X11/xorg.conf
"RgbPath" is not a valid keyword in this section.
(EE) Problem parsing the config file
(EE) Error parsing the config file
Fatal server error:
no screens found
(WW) xf86CloseConsole: KDSETMODE failed: Bad file descriptor
(WW) xf86CloseConsole: VT_GETMODE failed: Bad file descriptor
我好苦,搞了这么几天不容易啊,眼看成功又这样了……
这回无论如何这个死球的X就是进不去了
非常不好意思的麻烦你们再帮忙看看,又是哪里不对了!
谢谢啊