小弟的笔记本只能显示普屏分辨率,不能显示宽屏。
显卡是x4500
xorg.conf文件如下
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
请问如何添加1280*800?
还有映像屏幕和非映像屏幕是怎么回事?里面有未知的又是怎么回事?
小弟的显示器分辨率也有问题,请问如何修改xorg.conf(已贴出)?
版面规则
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
-
- 帖子: 21
- 注册时间: 2008-12-03 9:50
- drc1234
- 帖子: 632
- 注册时间: 2008-08-31 10:09
Re: 小弟的显示器分辨率也有问题,请问如何修改xorg.conf(已贴出)?
8.04好办,8。10竟无displayconfig-gtk了,靠系统自动识别?
-
- 帖子: 2
- 注册时间: 2008-12-06 20:00
- drc1234
- 帖子: 632
- 注册时间: 2008-08-31 10:09
Re: 小弟的显示器分辨率也有问题,请问如何修改xorg.conf(已贴出)?
试一下,用sudo xvidtune 按show,在终端会输出你显示器支持的行和场频记下
Section "Monitor"
Identifier "Configured Monitor"
Vendorname ""
Modelname ""
Horizsync 30.0-72.0
Vertrefresh 50.0-120.0
modeline "1280x800@75" 5555555555555555555555555555555 +hsync +vsync 注:modeline数据怎么得到只好用804的LIVECD了
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 1280 800
Modes "1280x800@75" "800x600@75" "1280x1024@60" "800x600@72" "1400x1050@60" "800x600@56"
EndSubSection
EndSection
Section "Monitor"
Identifier "Configured Monitor"
Vendorname ""
Modelname ""
Horizsync 30.0-72.0
Vertrefresh 50.0-120.0
modeline "1280x800@75" 5555555555555555555555555555555 +hsync +vsync 注:modeline数据怎么得到只好用804的LIVECD了
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 1280 800
Modes "1280x800@75" "800x600@75" "1280x1024@60" "800x600@72" "1400x1050@60" "800x600@56"
EndSubSection
EndSection
-
- 帖子: 94
- 注册时间: 2008-05-27 9:12
Re: 小弟的显示器分辨率也有问题,请问如何修改xorg.conf(已贴出)?
最好不要修改 xorg.conf,看看自己目录下的 .config 或者 .gnome2 中,里面有个 monitor.xml,那是配置显示的。
估计原因是屏幕没有正确识别,或者识别错误。
估计原因是屏幕没有正确识别,或者识别错误。
-
- 帖子: 21
- 注册时间: 2008-12-03 9:50
Re: 小弟的显示器分辨率也有问题,请问如何修改xorg.conf(已贴出)?
谢谢ls各位,晚上回家试试