我用的是8.10,已经安装了w32解码器,mplayer播放正常,但是用totem-xine播放时,却会出现屏幕闪动的现象,这是怎么回事呢?
我已经关闭了totem的逐行扫描功能。
totem-xine播放时,屏幕闪动的厉害
-
- 帖子: 212
- 注册时间: 2006-11-17 9:53
- ioiogl
- 帖子: 205
- 注册时间: 2007-06-27 17:11
-
- 帖子: 16
- 注册时间: 2008-12-07 11:11
Re: totem-xine播放时,屏幕闪动的厉害
我也是!郁闷死我了!该怎么解决阿???
而且我用MPLAYER也一样
而且我用MPLAYER也一样
-
- 帖子: 5
- 注册时间: 2008-09-22 11:26
Re: totem-xine播放时,屏幕闪动的厉害
是闪后面的totem的图标吗
如果是的话
我就是被它折腾好久,最后终于发现原因。
1.外观-视觉效果 改成无
2.重装显卡驱动
如果是的话
我就是被它折腾好久,最后终于发现原因。
1.外观-视觉效果 改成无
2.重装显卡驱动
- 微风成长
- 帖子: 644
- 注册时间: 2008-12-14 18:43
- 联系:
Re: totem-xine播放时,屏幕闪动的厉害
我也是
刚用的时候正常,
后来装了ati 驱动后
重启就这样了
而且增加了许多视觉效果
比如说淡入浅出等等
不过把视觉效果关闭后 就一切Okay了
刚用的时候正常,
后来装了ati 驱动后
重启就这样了
而且增加了许多视觉效果
比如说淡入浅出等等
不过把视觉效果关闭后 就一切Okay了
-
- 帖子: 13
- 注册时间: 2009-02-07 10:25
Re: totem-xine播放时,屏幕闪动的厉害
This is useful if you use Totem with Xine under Ubuntu 8.04 Hardy Heron.
To get totem-xine to work you'll need to remove the totem-gstreamer package and install totem-xine, via the package manager (Synaptic or apt-get). After that, you also need to set totem-xine to use xshm, as follows:
Run gedit ~/.config/totem/xine_config (you can do this in a terminal or via Alt + F2).
Find the following line:
#video.driver:auto
Change it to the following:
video.driver:xshm
Save and close the xine_config file.
To get totem-xine to work you'll need to remove the totem-gstreamer package and install totem-xine, via the package manager (Synaptic or apt-get). After that, you also need to set totem-xine to use xshm, as follows:
Run gedit ~/.config/totem/xine_config (you can do this in a terminal or via Alt + F2).
Find the following line:
#video.driver:auto
Change it to the following:
video.driver:xshm
Save and close the xine_config file.
-
- 帖子: 130
- 注册时间: 2009-04-17 16:52
Re: totem-xine播放时,屏幕闪动的厉害
关闭视觉效果就好了吗?
- zhu527812567
- 帖子: 883
- 注册时间: 2009-11-17 12:29
- 联系:
Re: totem-xine播放时,屏幕闪动的厉害
效果关了就好
而且我记得904开始就没这个问题了
而且我记得904开始就没这个问题了