[严重求助］ubuntu 8.10 Nvidia 显卡驱动安装

#1

[严重求助］ubuntu 8.10 Nvidia 显卡驱动安装

引用

帖子由 zx323 » 2008-12-11 13:08

我的显卡是 gf2 gts/pro的
一开始安装71.86.04的驱动始终安不上
后来看了论坛里的帖子，安装了71.86.07版本的驱动，安装成功
但是sudo nvidia-settings 后
显示 ERROR: NV-CONTROL extension not found on this Display.
就这一行
运行 nvidia x server settings
里面只有五个可以打勾的地方，剩下的什么也干不了,求助高手，是什么问题啊?

上次由 zx323 在 2008-12-11 14:03，总共编辑 1 次。

#2

Re: [严重求助］ubuntu 8.10 Nvidia 显卡驱动安装

引用

#2

帖子由 zx323 » 2008-12-11 13:31

另外，我安装好驱动后，并没有提示要修改xorg.conf，
而是提示请升级xf86config或xorg.conf
启动后屏幕还是偏移的，然后我运行了sudo apt-get install nvidia-xconfig
和sudo nvidia-xconfig
新生成的xorg.conf 启动会黑屏，出现一个对话框,有三个选项,我选了第一个,似乎是在什么low的模式下运行显卡,但是点了那个在黑屏的第一个选项后启动屏幕就不偏移了,好奇怪啊

上次由 zx323 在 2008-12-11 14:07，总共编辑 1 次。

#3

Re: [严重求助］ubuntu 8.10 Nvidia 显卡驱动安装

引用

#3

帖子由 zx323 » 2008-12-11 13:32

这是我的xorg.conf文件,我曾经试着修改过,想办法让它不黑屏,但没用成功,要怎么改才能不黑屏啊
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildd@palmer) Thu Jun 26 06:22:40 UTC 2008

Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection

Section "Files"
RgbPath "/usr/lib/X11/rgb"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection

Section "InputDevice"

# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 60.0 - 60.0
VertRefresh 75.0
Option "DPMS"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "RenderAccel" "0"
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 24
Modes "1024x768_75" "800x600" "640x480"
EndSubSection
EndSection

Section "Extensions"
Option "Composite" "Enable"
EndSection

上次由 zx323 在 2008-12-11 14:05，总共编辑 1 次。