envyng驱动版本问题

[kujian]

我的显卡是6800gt，用envyng安装驱动是173版本，（是不是的软件源有问题，怎么版本这么低呢？）
还有如果我从 系统管理 硬件驱动里开3D加速后（安装的好像是169的版本）重启电脑，进X时竟然要我手动配置，尽管我配置后分辨率还是只有800＊600，不知道是怎么回事。

[blackiron]

用dmesg命令查看一下，根据我的判断是驱动版本不一致的可能性比较大

你执行

代码： 全选

dmesg >> dmesg.txt

然后把dmesg.txt文件贴上来，我帮你看看。记得用站内短消息通知我一下。

[kujian]

执行dmesg >> dmesg.txt 命令，什么都没有啊。
n@desktop:~$ dmesg >> dmesg.txt
kujian@desktop:~$

补充一下，用envyng装了173的驱动后，分辨率都正常，3D桌面也可以开，就是在 系统管理 硬件驱动 里开3D加速后重启电脑，驱动就出问题了。进X时竟然要我手动配置，尽管我配置后分辨率还是只有800＊600。

[blackiron]

dmesg命令的输出内容被输出到dmesg.txt中去了
在你的~/目录下找找，找到后把文件贴上来

[kujian]

呵呵，找到了
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-23-386 (buildd@palmer) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 Thu Nov 27 18:10:58 UTC 2008 (Ubuntu 2.6.24-23.46-386)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
[ 0.000000] BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f52e0
[ 0.000000] Entering add_active_range(0, 0, 261872) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 261872
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 261872
[ 0.000000] On node 0 totalpages: 261872
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 253 pages used for memmap
[ 0.000000] HighMem zone: 32243 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F91A0 checksum 0
[ 0.000000] ACPI: RSDP 000F91A0, 0014 (r0 VIAK8M)
[ 0.000000] ACPI: RSDT 3FEF3040, 0030 (r1 VIAK8M AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 3FEF30C0, 0074 (r1 VIAK8M AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 3FEF3180, 4EBE (r1 VIAK8M AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 3FEF0000, 0040
[ 0.000000] ACPI: SRAT 3FEF8140, 0090 (r1 AMD HAMMER 1 AMD 1)
[ 0.000000] ACPI: APIC 3FEF8080, 0068 (r1 VIAK8M AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:12 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:bed00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259827
[ 0.000000] Kernel command line: root=UUID=33bad663-97ad-4c15-aafc-1c4fc45919da ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1680.087 MHz processor.
[ 16.756098] Console: colour VGA+ 80x25
[ 16.756101] console [tty0] enabled
[ 16.756518] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 16.757142] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 16.779071] Memory: 1025696k/1047488k available (2080k kernel code, 20976k reserved, 976k data, 364k init, 129984k highmem)
[ 16.779080] virtual kernel memory layout:
[ 16.779081] fixmap : 0xfffa6000 - 0xfffff000 ( 356 kB)
[ 16.779082] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 16.779084] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 16.779085] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 16.779086] .init : 0xc0400000 - 0xc045b000 ( 364 kB)
[ 16.779087] .data : 0xc0308168 - 0xc03fc3a4 ( 976 kB)
[ 16.779089] .text : 0xc0100000 - 0xc0308168 (2080 kB)
[ 16.779092] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 16.779137] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 16.859098] Calibrating delay using timer specific routine.. 3363.99 BogoMIPS (lpj=6727990)
[ 16.859124] Security Framework initialized
[ 16.859130] SELinux: Disabled at boot.
[ 16.859141] AppArmor: AppArmor initialized
[ 16.859145] Failure registering capabilities with primary security module.
[ 16.859152] Mount-cache hash table entries: 512
[ 16.859252] Initializing cgroup subsys ns
[ 16.859257] Initializing cgroup subsys cpuacct
[ 16.859265] CPU: After generic identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000000 00000000 00000001 00000000
[ 16.859273] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 16.859275] CPU: L2 Cache: 256K (64 bytes/line)
[ 16.859278] CPU: After all inits, caps: 078bfbff c3d3fbff 00000000 00020410 00000000 00000000 00000001 00000000
[ 16.859288] Compat vDSO mapped to ffffe000.
[ 16.859297] CPU: AMD Sempron(tm) Processor 2800+ stepping 00
[ 16.859302] Checking 'hlt' instruction... OK.
[ 16.876461] Freeing SMP alternatives: 0k freed
[ 16.876576] Early unpacking initramfs... done
[ 17.267197] ACPI: Core revision 20070126
[ 17.267260] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 17.270686] ENABLING IO-APIC IRQs
[ 17.271006] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[ 17.414765] net_namespace: 64 bytes
[ 17.414771] Booting paravirtualized kernel on bare hardware
[ 17.415243] Time: 12:49:11 Date: 01/12/09
[ 17.415263] NET: Registered protocol family 16
[ 17.415407] EISA bus registered
[ 17.415438] ACPI: bus type pci registered
[ 17.423417] PCI: PCI BIOS revision 2.10 entry at 0xfb870, last bus=1
[ 17.423419] PCI: Using configuration type 1
[ 17.423423] Setting up standard PCI resources
[ 17.428191] ACPI: EC: Look up EC in DSDT
[ 17.432879] ACPI: Interpreter enabled
[ 17.432884] ACPI: (supports S0 S1 S4 S5)
[ 17.432899] ACPI: Using IOAPIC for interrupt routing
[ 17.438614] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 17.439441] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 17.486382] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
[ 17.486536] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
[ 17.486696] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
[ 17.486833] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.486966] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.487094] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.487221] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.487348] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.487511] ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
[ 17.487658] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
[ 17.487804] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
[ 17.487974] ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
[ 17.488064] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 17.488088] pnp: PnP ACPI init
[ 17.488095] ACPI: bus type pnp registered
[ 17.488305] pnpacpi: exceeded the max number of mem resources: 12
[ 17.491524] pnp: PnP ACPI: found 13 devices
[ 17.491527] ACPI: ACPI bus type pnp unregistered
[ 17.491531] PnPBIOS: Disabled by ACPI PNP
[ 17.491699] PCI: Using ACPI for IRQ routing
[ 17.491702] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 17.522579] NET: Registered protocol family 8
[ 17.522581] NET: Registered protocol family 20
[ 17.522634] AppArmor: AppArmor Filesystem Enabled
[ 17.526553] Time: tsc clocksource has been installed.
[ 17.534575] system 00:00: iomem range 0xd5000-0xd7fff has been reserved
[ 17.534578] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 17.534581] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 17.534584] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 17.534587] system 00:00: iomem range 0x3ff00000-0x3fffffff has been reserved
[ 17.534590] system 00:00: iomem range 0x3fef0000-0x3fefffff could not be reserved
[ 17.534593] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
[ 17.534596] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 17.534599] system 00:00: iomem range 0x100000-0x3feeffff could not be reserved
[ 17.534602] system 00:00: iomem range 0x0-0x0 could not be reserved
[ 17.534605] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 17.534608] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 17.534614] system 00:02: ioport range 0x4000-0x407f has been reserved
[ 17.534617] system 00:02: ioport range 0x5000-0x500f has been reserved
[ 17.534623] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 17.534626] system 00:03: ioport range 0x290-0x297 has been reserved
[ 17.564932] PCI: Bridge: 0000:00:01.0
[ 17.564934] IO window: disabled.
[ 17.564938] MEM window: f8000000-faffffff
[ 17.564941] PREFETCH window: f0000000-f7ffffff
[ 17.564955] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 17.564965] NET: Registered protocol family 2
[ 17.602543] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 17.602828] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 17.603677] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 17.603894] TCP: Hash tables configured (established 131072 bind 65536)
[ 17.603897] TCP reno registered
[ 17.614614] checking if image is initramfs... it is
[ 18.066111] Switched to high resolution mode on CPU 0
[ 18.376035] Freeing initrd memory: 8129k freed
[ 18.376516] audit: initializing netlink socket (disabled)
[ 18.376528] audit(1231764551.492:1): initialized
[ 18.376647] highmem bounce pool size: 64 pages
[ 18.378031] VFS: Disk quotas dquot_6.5.1
[ 18.378054] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 18.378174] io scheduler noop registered
[ 18.378176] io scheduler anticipatory registered
[ 18.378178] io scheduler deadline registered
[ 18.378187] io scheduler cfq registered (default)
[ 18.378198] PCI: VIA PCI bridge detected. Disabling DAC.
[ 18.378273] Boot video device is 0000:01:00.0
[ 18.378479] isapnp: Scanning for PnP cards...
[ 18.732404] isapnp: No Plug & Play device found
[ 18.756640] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 18.756744] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.757274] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.757864] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 18.757922] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 18.757996] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 18.758352] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 18.758356] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 18.761656] mice: PS/2 mouse device common for all mice
[ 18.761747] EISA: Probing bus 0 at eisa.0
[ 18.761765] Cannot allocate resource for EISA slot 4
[ 18.761767] Cannot allocate resource for EISA slot 5
[ 18.761779] EISA: Detected 0 cards.
[ 18.761782] cpuidle: using governor ladder
[ 18.761901] NET: Registered protocol family 1
[ 18.761923] Using IPI Shortcut mode
[ 18.761948] registered taskstats version 1
[ 18.762039] Magic number: 9:927:834
[ 18.762112] hash matches device ptyu0
[ 18.762153] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 18.762155] EDD information not available.
[ 18.762385] Freeing unused kernel memory: 364k freed
[ 18.762411] Write protecting the kernel read-only data: 786k
[ 18.785451] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 19.992588] fuse init (API version 7.9)
[ 20.009288] ACPI: Fan [FAN] (on)
[ 20.015972] ACPI: Thermal Zone [THRM] (22 C)
[ 20.034917] device-mapper: uevent: version 1.0.3
[ 20.034958] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[ 20.053004] md: linear personality registered for level -1
[ 20.058777] md: multipath personality registered for level -4
[ 20.063347] md: raid0 personality registered for level 0
[ 20.069146] md: raid1 personality registered for level 1
[ 20.074167] xor: automatically using best checksumming function: pIII_sse
[ 20.092298] pIII_sse : 5318.000 MB/sec
[ 20.092300] xor: using function: pIII_sse (5318.000 MB/sec)
[ 20.092883] async_tx: api initialized (async)
[ 20.160265] raid6: int32x1 628 MB/s
[ 20.228272] raid6: int32x2 666 MB/s
[ 20.296184] raid6: int32x4 637 MB/s
[ 20.364113] raid6: int32x8 464 MB/s
[ 20.432047] raid6: mmxx1 1336 MB/s
[ 20.499948] raid6: mmxx2 2506 MB/s
[ 20.567890] raid6: sse1x1 1263 MB/s
[ 20.635828] raid6: sse1x2 2099 MB/s
[ 20.703795] raid6: sse2x1 2118 MB/s
[ 20.771712] raid6: sse2x2 2771 MB/s
[ 20.771714] raid6: using algorithm sse2x2 (2771 MB/s)
[ 20.771717] md: raid6 personality registered for level 6
[ 20.771719] md: raid5 personality registered for level 5
[ 20.771721] md: raid4 personality registered for level 4
[ 20.802242] md: raid10 personality registered for level 10
[ 21.451394] SCSI subsystem initialized
[ 21.499182] usbcore: registered new interface driver usbfs
[ 21.499203] usbcore: registered new interface driver hub
[ 21.519116] usbcore: registered new device driver usb
[ 21.520131] USB Universal Host Controller Interface driver v3.0
[ 21.520396] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[ 21.520403] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 21.520413] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 21.520646] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 21.520675] uhci_hcd 0000:00:10.0: irq 16, io base 0x0000e300
[ 21.520791] usb usb1: configuration #1 chosen from 1 choice
[ 21.520811] hub 1-0:1.0: USB hub found
[ 21.520816] hub 1-0:1.0: 2 ports detected
[ 21.527081] libata version 3.00 loaded.
[ 21.541819] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 21.541825] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[ 21.623088] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 21.623101] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 21.623122] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 21.623143] uhci_hcd 0000:00:10.1: irq 16, io base 0x0000e400
[ 21.623247] usb usb2: configuration #1 chosen from 1 choice
[ 21.623268] hub 2-0:1.0: USB hub found
[ 21.623273] hub 2-0:1.0: 2 ports detected
[ 21.726999] ACPI: PCI Interrupt 0000:00:10.2 -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 21.727012] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 21.727032] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 21.727054] uhci_hcd 0000:00:10.2: irq 16, io base 0x0000e500
[ 21.727149] usb usb3: configuration #1 chosen from 1 choice
[ 21.727168] hub 3-0:1.0: USB hub found
[ 21.727173] hub 3-0:1.0: 2 ports detected
[ 21.746836] FDC 0 is a post-1991 82077
[ 21.830912] ACPI: PCI Interrupt 0000:00:10.3 -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 21.830926] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 21.830948] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 21.830970] uhci_hcd 0000:00:10.3: irq 16, io base 0x0000e600
[ 21.831068] usb usb4: configuration #1 chosen from 1 choice
[ 21.831088] hub 4-0:1.0: USB hub found
[ 21.831093] hub 4-0:1.0: 2 ports detected
[ 21.935452] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 21.935465] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 21.935490] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[ 21.935527] ehci_hcd 0000:00:10.4: irq 16, io mem 0xfb000000
[ 21.946713] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 21.946831] usb usb5: configuration #1 chosen from 1 choice
[ 21.946853] hub 5-0:1.0: USB hub found
[ 21.946859] hub 5-0:1.0: 8 ports detected
[ 22.053315] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 22.053323] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 17
[ 22.053374] ACPI: PCI interrupt for device 0000:00:0f.1 disabled
[ 22.056452] pata_via 0000:00:0f.1: version 0.3.3
[ 22.056474] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 17
[ 22.058249] scsi0 : pata_via
[ 22.059048] scsi1 : pata_via
[ 22.060249] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe200 irq 14
[ 22.060252] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe208 irq 15
[ 22.231231] ata1.00: ATA-6: IC35L060AVV207-0, V22OA66A, max UDMA/100
[ 22.231236] ata1.00: 66055248 sectors, multi 16: LBA48
[ 22.255594] ata1.00: configured for UDMA/100
[ 22.575051] ata2.00: ATAPI: CD-ROM F566E, 1.06, max UDMA/66
[ 22.575064] ata2.00: limited to UDMA/33 due to 40-wire cable
[ 22.746287] ata2.00: configured for UDMA/33
[ 22.746387] scsi 0:0:0:0: Direct-Access ATA IC35L060AVV207-0 V22O PQ: 0 ANSI: 5
[ 22.747051] scsi 1:0:0:0: CD-ROM CD-ROM F566E 1.06 PQ: 0 ANSI: 5
[ 22.747196] sata_via 0000:00:0f.0: version 2.3
[ 22.747219] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 17
[ 22.747256] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 22.748044] scsi2 : sata_via
[ 22.748454] scsi3 : sata_via
[ 22.748494] ata3: SATA max UDMA/133 cmd 0xe100 ctl 0xe700 bmdma 0xe000 irq 17
[ 22.748497] ata4: SATA max UDMA/133 cmd 0xe800 ctl 0xe900 bmdma 0xe008 irq 17
[ 22.753046] Driver 'sd' needs updating - please use bus_type methods
[ 22.753131] sd 0:0:0:0: [sda] 66055248 512-byte hardware sectors (33820 MB)
[ 22.753143] sd 0:0:0:0: [sda] Write Protect is off
[ 22.753145] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.753160] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.753200] sd 0:0:0:0: [sda] 66055248 512-byte hardware sectors (33820 MB)
[ 22.753208] sd 0:0:0:0: [sda] Write Protect is off
[ 22.753210] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.753222] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.753226] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 22.767456] sda1 sda2 < sda5 sda6 sda7 >
[ 22.812763] sd 0:0:0:0: [sda] Attached SCSI disk
[ 22.817519] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 22.817537] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 22.823191] sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 22.823197] Uniform CD-ROM driver Revision: 3.20
[ 22.823245] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 22.949842] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 23.114011] ata3.00: ATA-6: ST380817AS, 3.42, max UDMA/133
[ 23.114016] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (not used)
[ 23.129976] ata3.00: configured for UDMA/133
[ 23.221594] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 23.333996] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 23.344837] scsi 2:0:0:0: Direct-Access ATA ST380817AS 3.42 PQ: 0 ANSI: 5
[ 23.345164] sd 2:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[ 23.345175] sd 2:0:0:0: [sdb] Write Protect is off
[ 23.345178] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 23.345192] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.345233] sd 2:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[ 23.345241] sd 2:0:0:0: [sdb] Write Protect is off
[ 23.345243] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 23.345256] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.345260] sdb: sdb1 sdb2 < sdb5 sdb6<6>usb 2-1: configuration #1 chosen from 1 choice
[ 23.402057] sdb7 >
[ 23.402167] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 23.402200] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 23.402547] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[ 23.402553] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 18
[ 23.402783] eth0: VIA Rhine II at 0xfb001000, 00:04:61:93:2c:6a, IRQ 18.
[ 23.403459] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[ 23.761456] kjournald starting. Commit interval 5 seconds
[ 23.761469] EXT3-fs: mounted filesystem with ordered data mode.
[ 31.724185] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 31.762058] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 32.339931] Linux agpgart interface v0.102
[ 32.388084] agpgart: Detected AGP bridge 0
[ 32.409650] agpgart: AGP aperture is 128M @ 0xe8000000
[ 32.751097] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 32.752946] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 32.966797] input: Power Button (FF) as /devices/virtual/input/input2
[ 32.977177] ACPI: Power Button (FF) [PWRF]
[ 32.977286] input: Power Button (CM) as /devices/virtual/input/input3
[ 32.993147] ACPI: Power Button (CM) [PWRB]
[ 34.789230] nvidia: module license 'NVIDIA' taints kernel.
[ 35.483143] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 35.704631] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 36.078507] Real Time Clock Driver v1.12ac
[ 36.110187] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 36.110196] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 19
[ 36.110330] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 36.627020] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 36.627274] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.12 Thu Jul 17 18:11:36 PDT 2008
[ 36.821148] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 36.852919] parport_pc 00:0a: reported by Plug and Play ACPI
[ 36.852969] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 39.127665] lp0: using parport0 (interrupt-driven).
[ 40.959167] Adding 1028120k swap on /dev/sda5. Priority:-1 extents:1 across:1028120k
[ 43.076359] EXT3 FS on sda1, internal journal
[ 46.577336] kjournald starting. Commit interval 5 seconds
[ 46.577659] EXT3 FS on sda6, internal journal
[ 46.577663] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.510646] NET: Registered protocol family 17
[ 53.235103] powernow-k8: Power state transitions not supported
[ 57.900824] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 57.900838] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 57.900891] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 59.161120] tun: Universal TUN/TAP device driver, 1.6
[ 59.161125] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-23-386 (buildd@palmer) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 Thu Nov 27 18:10:58 UTC 2008 (Ubuntu 2.6.24-23.46-386)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
[ 0.000000] BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f52e0
[ 0.000000] Entering add_active_range(0, 0, 261872) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 261872
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 261872
[ 0.000000] On node 0 totalpages: 261872
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 253 pages used for memmap
[ 0.000000] HighMem zone: 32243 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F91A0 checksum 0
[ 0.000000] ACPI: RSDP 000F91A0, 0014 (r0 VIAK8M)
[ 0.000000] ACPI: RSDT 3FEF3040, 0030 (r1 VIAK8M AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 3FEF30C0, 0074 (r1 VIAK8M AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 3FEF3180, 4EBE (r1 VIAK8M AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 3FEF0000, 0040
[ 0.000000] ACPI: SRAT 3FEF8140, 0090 (r1 AMD HAMMER 1 AMD 1)
[ 0.000000] ACPI: APIC 3FEF8080, 0068 (r1 VIAK8M AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:12 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:bed00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259827
[ 0.000000] Kernel command line: root=UUID=33bad663-97ad-4c15-aafc-1c4fc45919da ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1680.087 MHz processor.
[ 16.756098] Console: colour VGA+ 80x25
[ 16.756101] console [tty0] enabled
[ 16.756518] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 16.757142] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 16.779071] Memory: 1025696k/1047488k available (2080k kernel code, 20976k reserved, 976k data, 364k init, 129984k highmem)
[ 16.779080] virtual kernel memory layout:
[ 16.779081] fixmap : 0xfffa6000 - 0xfffff000 ( 356 kB)
[ 16.779082] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 16.779084] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 16.779085] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 16.779086] .init : 0xc0400000 - 0xc045b000 ( 364 kB)
[ 16.779087] .data : 0xc0308168 - 0xc03fc3a4 ( 976 kB)
[ 16.779089] .text : 0xc0100000 - 0xc0308168 (2080 kB)
[ 16.779092] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 16.779137] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 16.859098] Calibrating delay using timer specific routine.. 3363.99 BogoMIPS (lpj=6727990)
[ 16.859124] Security Framework initialized
[ 16.859130] SELinux: Disabled at boot.
[ 16.859141] AppArmor: AppArmor initialized
[ 16.859145] Failure registering capabilities with primary security module.
[ 16.859152] Mount-cache hash table entries: 512
[ 16.859252] Initializing cgroup subsys ns
[ 16.859257] Initializing cgroup subsys cpuacct
[ 16.859265] CPU: After generic identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000000 00000000 00000001 00000000
[ 16.859273] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 16.859275] CPU: L2 Cache: 256K (64 bytes/line)
[ 16.859278] CPU: After all inits, caps: 078bfbff c3d3fbff 00000000 00020410 00000000 00000000 00000001 00000000
[ 16.859288] Compat vDSO mapped to ffffe000.
[ 16.859297] CPU: AMD Sempron(tm) Processor 2800+ stepping 00
[ 16.859302] Checking 'hlt' instruction... OK.
[ 16.876461] Freeing SMP alternatives: 0k freed
[ 16.876576] Early unpacking initramfs... done
[ 17.267197] ACPI: Core revision 20070126
[ 17.267260] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 17.270686] ENABLING IO-APIC IRQs
[ 17.271006] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[ 17.414765] net_namespace: 64 bytes
[ 17.414771] Booting paravirtualized kernel on bare hardware
[ 17.415243] Time: 12:49:11 Date: 01/12/09
[ 17.415263] NET: Registered protocol family 16
[ 17.415407] EISA bus registered
[ 17.415438] ACPI: bus type pci registered
[ 17.423417] PCI: PCI BIOS revision 2.10 entry at 0xfb870, last bus=1
[ 17.423419] PCI: Using configuration type 1
[ 17.423423] Setting up standard PCI resources
[ 17.428191] ACPI: EC: Look up EC in DSDT
[ 17.432879] ACPI: Interpreter enabled
[ 17.432884] ACPI: (supports S0 S1 S4 S5)
[ 17.432899] ACPI: Using IOAPIC for interrupt routing
[ 17.438614] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 17.439441] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 17.486382] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
[ 17.486536] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
[ 17.486696] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
[ 17.486833] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.486966] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.487094] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.487221] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.487348] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.487511] ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
[ 17.487658] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
[ 17.487804] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
[ 17.487974] ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
[ 17.488064] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 17.488088] pnp: PnP ACPI init
[ 17.488095] ACPI: bus type pnp registered
[ 17.488305] pnpacpi: exceeded the max number of mem resources: 12
[ 17.491524] pnp: PnP ACPI: found 13 devices
[ 17.491527] ACPI: ACPI bus type pnp unregistered
[ 17.491531] PnPBIOS: Disabled by ACPI PNP
[ 17.491699] PCI: Using ACPI for IRQ routing
[ 17.491702] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 17.522579] NET: Registered protocol family 8
[ 17.522581] NET: Registered protocol family 20
[ 17.522634] AppArmor: AppArmor Filesystem Enabled
[ 17.526553] Time: tsc clocksource has been installed.
[ 17.534575] system 00:00: iomem range 0xd5000-0xd7fff has been reserved
[ 17.534578] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 17.534581] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 17.534584] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 17.534587] system 00:00: iomem range 0x3ff00000-0x3fffffff has been reserved
[ 17.534590] system 00:00: iomem range 0x3fef0000-0x3fefffff could not be reserved
[ 17.534593] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
[ 17.534596] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 17.534599] system 00:00: iomem range 0x100000-0x3feeffff could not be reserved
[ 17.534602] system 00:00: iomem range 0x0-0x0 could not be reserved
[ 17.534605] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 17.534608] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 17.534614] system 00:02: ioport range 0x4000-0x407f has been reserved
[ 17.534617] system 00:02: ioport range 0x5000-0x500f has been reserved
[ 17.534623] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 17.534626] system 00:03: ioport range 0x290-0x297 has been reserved
[ 17.564932] PCI: Bridge: 0000:00:01.0
[ 17.564934] IO window: disabled.
[ 17.564938] MEM window: f8000000-faffffff
[ 17.564941] PREFETCH window: f0000000-f7ffffff
[ 17.564955] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 17.564965] NET: Registered protocol family 2
[ 17.602543] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 17.602828] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 17.603677] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 17.603894] TCP: Hash tables configured (established 131072 bind 65536)
[ 17.603897] TCP reno registered
[ 17.614614] checking if image is initramfs... it is
[ 18.066111] Switched to high resolution mode on CPU 0
[ 18.376035] Freeing initrd memory: 8129k freed
[ 18.376516] audit: initializing netlink socket (disabled)
[ 18.376528] audit(1231764551.492:1): initialized
[ 18.376647] highmem bounce pool size: 64 pages
[ 18.378031] VFS: Disk quotas dquot_6.5.1
[ 18.378054] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 18.378174] io scheduler noop registered
[ 18.378176] io scheduler anticipatory registered
[ 18.378178] io scheduler deadline registered
[ 18.378187] io scheduler cfq registered (default)
[ 18.378198] PCI: VIA PCI bridge detected. Disabling DAC.
[ 18.378273] Boot video device is 0000:01:00.0
[ 18.378479] isapnp: Scanning for PnP cards...
[ 18.732404] isapnp: No Plug & Play device found
[ 18.756640] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 18.756744] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.757274] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.757864] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 18.757922] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 18.757996] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 18.758352] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 18.758356] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 18.761656] mice: PS/2 mouse device common for all mice
[ 18.761747] EISA: Probing bus 0 at eisa.0
[ 18.761765] Cannot allocate resource for EISA slot 4
[ 18.761767] Cannot allocate resource for EISA slot 5
[ 18.761779] EISA: Detected 0 cards.
[ 18.761782] cpuidle: using governor ladder
[ 18.761901] NET: Registered protocol family 1
[ 18.761923] Using IPI Shortcut mode
[ 18.761948] registered taskstats version 1
[ 18.762039] Magic number: 9:927:834
[ 18.762112] hash matches device ptyu0
[ 18.762153] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 18.762155] EDD information not available.
[ 18.762385] Freeing unused kernel memory: 364k freed
[ 18.762411] Write protecting the kernel read-only data: 786k
[ 18.785451] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 19.992588] fuse init (API version 7.9)
[ 20.009288] ACPI: Fan [FAN] (on)
[ 20.015972] ACPI: Thermal Zone [THRM] (22 C)
[ 20.034917] device-mapper: uevent: version 1.0.3
[ 20.034958] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[ 20.053004] md: linear personality registered for level -1
[ 20.058777] md: multipath personality registered for level -4
[ 20.063347] md: raid0 personality registered for level 0
[ 20.069146] md: raid1 personality registered for level 1
[ 20.074167] xor: automatically using best checksumming function: pIII_sse
[ 20.092298] pIII_sse : 5318.000 MB/sec
[ 20.092300] xor: using function: pIII_sse (5318.000 MB/sec)
[ 20.092883] async_tx: api initialized (async)
[ 20.160265] raid6: int32x1 628 MB/s
[ 20.228272] raid6: int32x2 666 MB/s
[ 20.296184] raid6: int32x4 637 MB/s
[ 20.364113] raid6: int32x8 464 MB/s
[ 20.432047] raid6: mmxx1 1336 MB/s
[ 20.499948] raid6: mmxx2 2506 MB/s
[ 20.567890] raid6: sse1x1 1263 MB/s
[ 20.635828] raid6: sse1x2 2099 MB/s
[ 20.703795] raid6: sse2x1 2118 MB/s
[ 20.771712] raid6: sse2x2 2771 MB/s

[kujian]

文件太大，分2次发了。
[ 20.771714] raid6: using algorithm sse2x2 (2771 MB/s)
[ 20.771717] md: raid6 personality registered for level 6
[ 20.771719] md: raid5 personality registered for level 5
[ 20.771721] md: raid4 personality registered for level 4
[ 20.802242] md: raid10 personality registered for level 10
[ 21.451394] SCSI subsystem initialized
[ 21.499182] usbcore: registered new interface driver usbfs
[ 21.499203] usbcore: registered new interface driver hub
[ 21.519116] usbcore: registered new device driver usb
[ 21.520131] USB Universal Host Controller Interface driver v3.0
[ 21.520396] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[ 21.520403] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 21.520413] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 21.520646] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 21.520675] uhci_hcd 0000:00:10.0: irq 16, io base 0x0000e300
[ 21.520791] usb usb1: configuration #1 chosen from 1 choice
[ 21.520811] hub 1-0:1.0: USB hub found
[ 21.520816] hub 1-0:1.0: 2 ports detected
[ 21.527081] libata version 3.00 loaded.
[ 21.541819] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 21.541825] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[ 21.623088] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 21.623101] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 21.623122] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 21.623143] uhci_hcd 0000:00:10.1: irq 16, io base 0x0000e400
[ 21.623247] usb usb2: configuration #1 chosen from 1 choice
[ 21.623268] hub 2-0:1.0: USB hub found
[ 21.623273] hub 2-0:1.0: 2 ports detected
[ 21.726999] ACPI: PCI Interrupt 0000:00:10.2 -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 21.727012] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 21.727032] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 21.727054] uhci_hcd 0000:00:10.2: irq 16, io base 0x0000e500
[ 21.727149] usb usb3: configuration #1 chosen from 1 choice
[ 21.727168] hub 3-0:1.0: USB hub found
[ 21.727173] hub 3-0:1.0: 2 ports detected
[ 21.746836] FDC 0 is a post-1991 82077
[ 21.830912] ACPI: PCI Interrupt 0000:00:10.3 -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 21.830926] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 21.830948] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 21.830970] uhci_hcd 0000:00:10.3: irq 16, io base 0x0000e600
[ 21.831068] usb usb4: configuration #1 chosen from 1 choice
[ 21.831088] hub 4-0:1.0: USB hub found
[ 21.831093] hub 4-0:1.0: 2 ports detected
[ 21.935452] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 21.935465] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 21.935490] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[ 21.935527] ehci_hcd 0000:00:10.4: irq 16, io mem 0xfb000000
[ 21.946713] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 21.946831] usb usb5: configuration #1 chosen from 1 choice
[ 21.946853] hub 5-0:1.0: USB hub found
[ 21.946859] hub 5-0:1.0: 8 ports detected
[ 22.053315] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 22.053323] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 17
[ 22.053374] ACPI: PCI interrupt for device 0000:00:0f.1 disabled
[ 22.056452] pata_via 0000:00:0f.1: version 0.3.3
[ 22.056474] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 17
[ 22.058249] scsi0 : pata_via
[ 22.059048] scsi1 : pata_via
[ 22.060249] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe200 irq 14
[ 22.060252] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe208 irq 15
[ 22.231231] ata1.00: ATA-6: IC35L060AVV207-0, V22OA66A, max UDMA/100
[ 22.231236] ata1.00: 66055248 sectors, multi 16: LBA48
[ 22.255594] ata1.00: configured for UDMA/100
[ 22.575051] ata2.00: ATAPI: CD-ROM F566E, 1.06, max UDMA/66
[ 22.575064] ata2.00: limited to UDMA/33 due to 40-wire cable
[ 22.746287] ata2.00: configured for UDMA/33
[ 22.746387] scsi 0:0:0:0: Direct-Access ATA IC35L060AVV207-0 V22O PQ: 0 ANSI: 5
[ 22.747051] scsi 1:0:0:0: CD-ROM CD-ROM F566E 1.06 PQ: 0 ANSI: 5
[ 22.747196] sata_via 0000:00:0f.0: version 2.3
[ 22.747219] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 17
[ 22.747256] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 22.748044] scsi2 : sata_via
[ 22.748454] scsi3 : sata_via
[ 22.748494] ata3: SATA max UDMA/133 cmd 0xe100 ctl 0xe700 bmdma 0xe000 irq 17
[ 22.748497] ata4: SATA max UDMA/133 cmd 0xe800 ctl 0xe900 bmdma 0xe008 irq 17
[ 22.753046] Driver 'sd' needs updating - please use bus_type methods
[ 22.753131] sd 0:0:0:0: [sda] 66055248 512-byte hardware sectors (33820 MB)
[ 22.753143] sd 0:0:0:0: [sda] Write Protect is off
[ 22.753145] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.753160] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.753200] sd 0:0:0:0: [sda] 66055248 512-byte hardware sectors (33820 MB)
[ 22.753208] sd 0:0:0:0: [sda] Write Protect is off
[ 22.753210] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.753222] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.753226] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 22.767456] sda1 sda2 < sda5 sda6 sda7 >
[ 22.812763] sd 0:0:0:0: [sda] Attached SCSI disk
[ 22.817519] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 22.817537] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 22.823191] sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 22.823197] Uniform CD-ROM driver Revision: 3.20
[ 22.823245] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 22.949842] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 23.114011] ata3.00: ATA-6: ST380817AS, 3.42, max UDMA/133
[ 23.114016] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (not used)
[ 23.129976] ata3.00: configured for UDMA/133
[ 23.221594] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 23.333996] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 23.344837] scsi 2:0:0:0: Direct-Access ATA ST380817AS 3.42 PQ: 0 ANSI: 5
[ 23.345164] sd 2:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[ 23.345175] sd 2:0:0:0: [sdb] Write Protect is off
[ 23.345178] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 23.345192] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.345233] sd 2:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[ 23.345241] sd 2:0:0:0: [sdb] Write Protect is off
[ 23.345243] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 23.345256] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.345260] sdb: sdb1 sdb2 < sdb5 sdb6<6>usb 2-1: configuration #1 chosen from 1 choice
[ 23.402057] sdb7 >
[ 23.402167] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 23.402200] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 23.402547] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[ 23.402553] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 18
[ 23.402783] eth0: VIA Rhine II at 0xfb001000, 00:04:61:93:2c:6a, IRQ 18.
[ 23.403459] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[ 23.761456] kjournald starting. Commit interval 5 seconds
[ 23.761469] EXT3-fs: mounted filesystem with ordered data mode.
[ 31.724185] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 31.762058] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 32.339931] Linux agpgart interface v0.102
[ 32.388084] agpgart: Detected AGP bridge 0
[ 32.409650] agpgart: AGP aperture is 128M @ 0xe8000000
[ 32.751097] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 32.752946] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 32.966797] input: Power Button (FF) as /devices/virtual/input/input2
[ 32.977177] ACPI: Power Button (FF) [PWRF]
[ 32.977286] input: Power Button (CM) as /devices/virtual/input/input3
[ 32.993147] ACPI: Power Button (CM) [PWRB]
[ 34.789230] nvidia: module license 'NVIDIA' taints kernel.
[ 35.483143] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 35.704631] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 36.078507] Real Time Clock Driver v1.12ac
[ 36.110187] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 36.110196] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 19
[ 36.110330] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 36.627020] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 36.627274] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.12 Thu Jul 17 18:11:36 PDT 2008
[ 36.821148] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 36.852919] parport_pc 00:0a: reported by Plug and Play ACPI
[ 36.852969] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 39.127665] lp0: using parport0 (interrupt-driven).
[ 40.959167] Adding 1028120k swap on /dev/sda5. Priority:-1 extents:1 across:1028120k
[ 43.076359] EXT3 FS on sda1, internal journal
[ 46.577336] kjournald starting. Commit interval 5 seconds
[ 46.577659] EXT3 FS on sda6, internal journal
[ 46.577663] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.510646] NET: Registered protocol family 17
[ 53.235103] powernow-k8: Power state transitions not supported
[ 57.900824] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 57.900838] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 57.900891] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 59.161120] tun: Universal TUN/TAP device driver, 1.6
[ 59.161125] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-23-386 (buildd@palmer) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 Thu Nov 27 18:10:58 UTC 2008 (Ubuntu 2.6.24-23.46-386)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
[ 0.000000] BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f52e0
[ 0.000000] Entering add_active_range(0, 0, 261872) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 261872
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 261872
[ 0.000000] On node 0 totalpages: 261872
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 253 pages used for memmap
[ 0.000000] HighMem zone: 32243 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F91A0 checksum 0
[ 0.000000] ACPI: RSDP 000F91A0, 0014 (r0 VIAK8M)
[ 0.000000] ACPI: RSDT 3FEF3040, 0030 (r1 VIAK8M AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 3FEF30C0, 0074 (r1 VIAK8M AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 3FEF3180, 4EBE (r1 VIAK8M AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 3FEF0000, 0040
[ 0.000000] ACPI: SRAT 3FEF8140, 0090 (r1 AMD HAMMER 1 AMD 1)
[ 0.000000] ACPI: APIC 3FEF8080, 0068 (r1 VIAK8M AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:12 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:bed00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259827
[ 0.000000] Kernel command line: root=UUID=33bad663-97ad-4c15-aafc-1c4fc45919da ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1680.087 MHz processor.
[ 16.756098] Console: colour VGA+ 80x25
[ 16.756101] console [tty0] enabled
[ 16.756518] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 16.757142] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 16.779071] Memory: 1025696k/1047488k available (2080k kernel code, 20976k reserved, 976k data, 364k init, 129984k highmem)
[ 16.779080] virtual kernel memory layout:
[ 16.779081] fixmap : 0xfffa6000 - 0xfffff000 ( 356 kB)
[ 16.779082] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 16.779084] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 16.779085] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 16.779086] .init : 0xc0400000 - 0xc045b000 ( 364 kB)
[ 16.779087] .data : 0xc0308168 - 0xc03fc3a4 ( 976 kB)
[ 16.779089] .text : 0xc0100000 - 0xc0308168 (2080 kB)
[ 16.779092] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 16.779137] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 16.859098] Calibrating delay using timer specific routine.. 3363.99 BogoMIPS (lpj=6727990)
[ 16.859124] Security Framework initialized
[ 16.859130] SELinux: Disabled at boot.
[ 16.859141] AppArmor: AppArmor initialized
[ 16.859145] Failure registering capabilities with primary security module.
[ 16.859152] Mount-cache hash table entries: 512
[ 16.859252] Initializing cgroup subsys ns
[ 16.859257] Initializing cgroup subsys cpuacct
[ 16.859265] CPU: After generic identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000000 00000000 00000001 00000000
[ 16.859273] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 16.859275] CPU: L2 Cache: 256K (64 bytes/line)
[ 16.859278] CPU: After all inits, caps: 078bfbff c3d3fbff 00000000 00020410 00000000 00000000 00000001 00000000
[ 16.859288] Compat vDSO mapped to ffffe000.
[ 16.859297] CPU: AMD Sempron(tm) Processor 2800+ stepping 00
[ 16.859302] Checking 'hlt' instruction... OK.
[ 16.876461] Freeing SMP alternatives: 0k freed
[ 16.876576] Early unpacking initramfs... done
[ 17.267197] ACPI: Core revision 20070126
[ 17.267260] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 17.270686] ENABLING IO-APIC IRQs
[ 17.271006] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[ 17.414765] net_namespace: 64 bytes
[ 17.414771] Booting paravirtualized kernel on bare hardware
[ 17.415243] Time: 12:49:11 Date: 01/12/09
[ 17.415263] NET: Registered protocol family 16
[ 17.415407] EISA bus registered
[ 17.415438] ACPI: bus type pci registered
[ 17.423417] PCI: PCI BIOS revision 2.10 entry at 0xfb870, last bus=1
[ 17.423419] PCI: Using configuration type 1
[ 17.423423] Setting up standard PCI resources
[ 17.428191] ACPI: EC: Look up EC in DSDT
[ 17.432879] ACPI: Interpreter enabled
[ 17.432884] ACPI: (supports S0 S1 S4 S5)
[ 17.432899] ACPI: Using IOAPIC for interrupt routing
[ 17.438614] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 17.439441] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 17.486382] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
[ 17.486536] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
[ 17.486696] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
[ 17.486833] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.486966] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.487094] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.487221] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.487348] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.487511] ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
[ 17.487658] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
[ 17.487804] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
[ 17.487974] ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
[ 17.488064] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 17.488088] pnp: PnP ACPI init
[ 17.488095] ACPI: bus type pnp registered
[ 17.488305] pnpacpi: exceeded the max number of mem resources: 12
[ 17.491524] pnp: PnP ACPI: found 13 devices
[ 17.491527] ACPI: ACPI bus type pnp unregistered
[ 17.491531] PnPBIOS: Disabled by ACPI PNP
[ 17.491699] PCI: Using ACPI for IRQ routing
[ 17.491702] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 17.522579] NET: Registered protocol family 8
[ 17.522581] NET: Registered protocol family 20
[ 17.522634] AppArmor: AppArmor Filesystem Enabled
[ 17.526553] Time: tsc clocksource has been installed.
[ 17.534575] system 00:00: iomem range 0xd5000-0xd7fff has been reserved
[ 17.534578] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 17.534581] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 17.534584] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 17.534587] system 00:00: iomem range 0x3ff00000-0x3fffffff has been reserved
[ 17.534590] system 00:00: iomem range 0x3fef0000-0x3fefffff could not be reserved
[ 17.534593] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
[ 17.534596] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 17.534599] system 00:00: iomem range 0x100000-0x3feeffff could not be reserved
[ 17.534602] system 00:00: iomem range 0x0-0x0 could not be reserved
[ 17.534605] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 17.534608] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 17.534614] system 00:02: ioport range 0x4000-0x407f has been reserved
[ 17.534617] system 00:02: ioport range 0x5000-0x500f has been reserved
[ 17.534623] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 17.534626] system 00:03: ioport range 0x290-0x297 has been reserved
[ 17.564932] PCI: Bridge: 0000:00:01.0
[ 17.564934] IO window: disabled.
[ 17.564938] MEM window: f8000000-faffffff
[ 17.564941] PREFETCH window: f0000000-f7ffffff
[ 17.564955] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 17.564965] NET: Registered protocol family 2
[ 17.602543] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 17.602828] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 17.603677] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 17.603894] TCP: Hash tables configured (established 131072 bind 65536)
[ 17.603897] TCP reno registered
[ 17.614614] checking if image is initramfs... it is
[ 18.066111] Switched to high resolution mode on CPU 0
[ 18.376035] Freeing initrd memory: 8129k freed
[ 18.376516] audit: initializing netlink socket (disabled)
[ 18.376528] audit(1231764551.492:1): initialized
[ 18.376647] highmem bounce pool size: 64 pages
[ 18.378031] VFS: Disk quotas dquot_6.5.1
[ 18.378054] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 18.378174] io scheduler noop registered
[ 18.378176] io scheduler anticipatory registered
[ 18.378178] io scheduler deadline registered
[ 18.378187] io scheduler cfq registered (default)
[ 18.378198] PCI: VIA PCI bridge detected. Disabling DAC.
[ 18.378273] Boot video device is 0000:01:00.0
[ 18.378479] isapnp: Scanning for PnP cards...
[ 18.732404] isapnp: No Plug & Play device found
[ 18.756640] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 18.756744] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.757274] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.757864] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 18.757922] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 18.757996] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 18.758352] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 18.758356] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 18.761656] mice: PS/2 mouse device common for all mice
[ 18.761747] EISA: Probing bus 0 at eisa.0
[ 18.761765] Cannot allocate resource for EISA slot 4
[ 18.761767] Cannot allocate resource for EISA slot 5
[ 18.761779] EISA: Detected 0 cards.
[ 18.761782] cpuidle: using governor ladder
[ 18.761901] NET: Registered protocol family 1
[ 18.761923] Using IPI Shortcut mode
[ 18.761948] registered taskstats version 1
[ 18.762039] Magic number: 9:927:834
[ 18.762112] hash matches device ptyu0
[ 18.762153] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 18.762155] EDD information not available.
[ 18.762385] Freeing unused kernel memory: 364k freed
[ 18.762411] Write protecting the kernel read-only data: 786k
[ 18.785451] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 19.992588] fuse init (API version 7.9)
[ 20.009288] ACPI: Fan [FAN] (on)
[ 20.015972] ACPI: Thermal Zone [THRM] (22 C)
[ 20.034917] device-mapper: uevent: version 1.0.3
[ 20.034958] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[ 20.053004] md: linear personality registered for level -1
[ 20.058777] md: multipath personality registered for level -4
[ 20.063347] md: raid0 personality registered for level 0
[ 20.069146] md: raid1 personality registered for level 1
[ 20.074167] xor: automatically using best checksumming function: pIII_sse
[ 20.092298] pIII_sse : 5318.000 MB/sec
[ 20.092300] xor: using function: pIII_sse (5318.000 MB/sec)
[ 20.092883] async_tx: api initialized (async)
[ 20.160265] raid6: int32x1 628 MB/s
[ 20.228272] raid6: int32x2 666 MB/s
[ 20.296184] raid6: int32x4 637 MB/s
[ 20.364113] raid6: int32x8 464 MB/s
[ 20.432047] raid6: mmxx1 1336 MB/s
[ 20.499948] raid6: mmxx2 2506 MB/s
[ 20.567890] raid6: sse1x1 1263 MB/s
[ 20.635828] raid6: sse1x2 2099 MB/s
[ 20.703795] raid6: sse2x1 2118 MB/s
[ 20.771712] raid6: sse2x2 2771 MB/s
[ 20.771714] raid6: using algorithm sse2x2 (2771 MB/s)
[ 20.771717] md: raid6 personality registered for level 6
[ 20.771719] md: raid5 personality registered for level 5
[ 20.771721] md: raid4 personality registered for level 4
[ 20.802242] md: raid10 personality registered for level 10
[ 21.451394] SCSI subsystem initialized
[ 21.499182] usbcore: registered new interface driver usbfs
[ 21.499203] usbcore: registered new interface driver hub
[ 21.519116] usbcore: registered new device driver usb
[ 21.520131] USB Universal Host Controller Interface driver v3.0
[ 21.520396] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[ 21.520403] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 21.520413] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 21.520646] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 21.520675] uhci_hcd 0000:00:10.0: irq 16, io base 0x0000e300
[ 21.520791] usb usb1: configuration #1 chosen from 1 choice
[ 21.520811] hub 1-0:1.0: USB hub found
[ 21.520816] hub 1-0:1.0: 2 ports detected
[ 21.527081] libata version 3.00 loaded.
[ 21.541819] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 21.541825] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[ 21.623088] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 21.623101] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 21.623122] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 21.623143] uhci_hcd 0000:00:10.1: irq 16, io base 0x0000e400
[ 21.623247] usb usb2: configuration #1 chosen from 1 choice
[ 21.623268] hub 2-0:1.0: USB hub found
[ 21.623273] hub 2-0:1.0: 2 ports detected
[ 21.726999] ACPI: PCI Interrupt 0000:00:10.2 -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 21.727012] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 21.727032] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 21.727054] uhci_hcd 0000:00:10.2: irq 16, io base 0x0000e500
[ 21.727149] usb usb3: configuration #1 chosen from 1 choice
[ 21.727168] hub 3-0:1.0: USB hub found
[ 21.727173] hub 3-0:1.0: 2 ports detected
[ 21.746836] FDC 0 is a post-1991 82077
[ 21.830912] ACPI: PCI Interrupt 0000:00:10.3 -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 21.830926] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 21.830948] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 21.830970] uhci_hcd 0000:00:10.3: irq 16, io base 0x0000e600
[ 21.831068] usb usb4: configuration #1 chosen from 1 choice
[ 21.831088] hub 4-0:1.0: USB hub found
[ 21.831093] hub 4-0:1.0: 2 ports detected
[ 21.935452] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 21.935465] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 21.935490] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[ 21.935527] ehci_hcd 0000:00:10.4: irq 16, io mem 0xfb000000
[ 21.946713] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 21.946831] usb usb5: configuration #1 chosen from 1 choice
[ 21.946853] hub 5-0:1.0: USB hub found
[ 21.946859] hub 5-0:1.0: 8 ports detected
[ 22.053315] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 22.053323] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 17
[ 22.053374] ACPI: PCI interrupt for device 0000:00:0f.1 disabled
[ 22.056452] pata_via 0000:00:0f.1: version 0.3.3
[ 22.056474] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 17
[ 22.058249] scsi0 : pata_via
[ 22.059048] scsi1 : pata_via
[ 22.060249] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe200 irq 14
[ 22.060252] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe208 irq 15
[ 22.231231] ata1.00: ATA-6: IC35L060AVV207-0, V22OA66A, max UDMA/100
[ 22.231236] ata1.00: 66055248 sectors, multi 16: LBA48
[ 22.255594] ata1.00: configured for UDMA/100
[ 22.575051] ata2.00: ATAPI: CD-ROM F566E, 1.06, max UDMA/66
[ 22.575064] ata2.00: limited to UDMA/33 due to 40-wire cable
[ 22.746287] ata2.00: configured for UDMA/33
[ 22.746387] scsi 0:0:0:0: Direct-Access ATA IC35L060AVV207-0 V22O PQ: 0 ANSI: 5
[ 22.747051] scsi 1:0:0:0: CD-ROM CD-ROM F566E 1.06 PQ: 0 ANSI: 5
[ 22.747196] sata_via 0000:00:0f.0: version 2.3
[ 22.747219] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 17
[ 22.747256] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 22.748044] scsi2 : sata_via
[ 22.748454] scsi3 : sata_via
[ 22.748494] ata3: SATA max UDMA/133 cmd 0xe100 ctl 0xe700 bmdma 0xe000 irq 17
[ 22.748497] ata4: SATA max UDMA/133 cmd 0xe800 ctl 0xe900 bmdma 0xe008 irq 17
[ 22.753046] Driver 'sd' needs updating - please use bus_type methods
[ 22.753131] sd 0:0:0:0: [sda] 66055248 512-byte hardware sectors (33820 MB)
[ 22.753143] sd 0:0:0:0: [sda] Write Protect is off
[ 22.753145] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.753160] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.753200] sd 0:0:0:0: [sda] 66055248 512-byte hardware sectors (33820 MB)
[ 22.753208] sd 0:0:0:0: [sda] Write Protect is off
[ 22.753210] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.753222] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.753226] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 22.767456] sda1 sda2 < sda5 sda6 sda7 >
[ 22.812763] sd 0:0:0:0: [sda] Attached SCSI disk
[ 22.817519] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 22.817537] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 22.823191] sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 22.823197] Uniform CD-ROM driver Revision: 3.20
[ 22.823245] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 22.949842] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 23.114011] ata3.00: ATA-6: ST380817AS, 3.42, max UDMA/133
[ 23.114016] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (not used)
[ 23.129976] ata3.00: configured for UDMA/133
[ 23.221594] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 23.333996] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 23.344837] scsi 2:0:0:0: Direct-Access ATA ST380817AS 3.42 PQ: 0 ANSI: 5
[ 23.345164] sd 2:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[ 23.345175] sd 2:0:0:0: [sdb] Write Protect is off
[ 23.345178] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 23.345192] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.345233] sd 2:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[ 23.345241] sd 2:0:0:0: [sdb] Write Protect is off
[ 23.345243] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 23.345256] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.345260] sdb: sdb1 sdb2 < sdb5 sdb6<6>usb 2-1: configuration #1 chosen from 1 choice
[ 23.402057] sdb7 >
[ 23.402167] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 23.402200] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 23.402547] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[ 23.402553] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 18
[ 23.402783] eth0: VIA Rhine II at 0xfb001000, 00:04:61:93:2c:6a, IRQ 18.
[ 23.403459] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[ 23.761456] kjournald starting. Commit interval 5 seconds
[ 23.761469] EXT3-fs: mounted filesystem with ordered data mode.
[ 31.724185] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 31.762058] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 32.339931] Linux agpgart interface v0.102
[ 32.388084] agpgart: Detected AGP bridge 0
[ 32.409650] agpgart: AGP aperture is 128M @ 0xe8000000
[ 32.751097] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 32.752946] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 32.966797] input: Power Button (FF) as /devices/virtual/input/input2
[ 32.977177] ACPI: Power Button (FF) [PWRF]
[ 32.977286] input: Power Button (CM) as /devices/virtual/input/input3
[ 32.993147] ACPI: Power Button (CM) [PWRB]
[ 34.789230] nvidia: module license 'NVIDIA' taints kernel.
[ 35.483143] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 35.704631] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 36.078507] Real Time Clock Driver v1.12ac
[ 36.110187] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 36.110196] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 19
[ 36.110330] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 36.627020] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 36.627274] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.12 Thu Jul 17 18:11:36 PDT 2008
[ 36.821148] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 36.852919] parport_pc 00:0a: reported by Plug and Play ACPI
[ 36.852969] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 39.127665] lp0: using parport0 (interrupt-driven).
[ 40.959167] Adding 1028120k swap on /dev/sda5. Priority:-1 extents:1 across:1028120k
[ 43.076359] EXT3 FS on sda1, internal journal
[ 46.577336] kjournald starting. Commit interval 5 seconds
[ 46.577659] EXT3 FS on sda6, internal journal
[ 46.577663] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.510646] NET: Registered protocol family 17
[ 53.235103] powernow-k8: Power state transitions not supported
[ 57.900824] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 57.900838] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 57.900891] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 59.161120] tun: Universal TUN/TAP device driver, 1.6
[ 59.161125] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

[kujian]

我按照你在论坛里的方法，手动安装180.22的驱动，安装后应该没有什么问题了。只是在查看了下面 系统管理 硬件驱动 提示：这个系统上没有使用专用驱动，不知道这样是否正常？下面是我新的dmesg信息（最后面一小部分，完整的我把文件传上来）

NVRM: loading NVIDIA UNIX x86 Kernel Module 180.22 Tue Jan 6 09:29:08 PST 2009
[ 34.876004] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 34.901290] parport_pc 00:0a: reported by Plug and Play ACPI
[ 34.901339] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 37.767051] lp0: using parport0 (interrupt-driven).
[ 37.909585] Adding 1028120k swap on /dev/sdb5. Priority:-1 extents:1 across:1028120k
[ 38.991425] EXT3 FS on sdb1, internal journal
[ 41.256332] kjournald starting. Commit interval 5 seconds
[ 41.256656] EXT3 FS on sdb6, internal journal
[ 41.256660] EXT3-fs: mounted filesystem with ordered data mode.
[ 43.172921] NET: Registered protocol family 17
[ 47.922216] powernow-k8: Power state transitions not supported
[ 53.041638] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 53.041651] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 53.041705] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 54.496162] tun: Universal TUN/TAP device driver, 1.6
[ 54.496166] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.co

[blackiron]

又是新老版本混用的问题！

[ 36.627274] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.12 Thu Jul 17 18:11:36 PDT 2008
NVRM: loading NVIDIA UNIX x86 Kernel Module 180.22 Tue Jan 6 09:29:08 PST 2009

看到没有？173.14.12和180.22共存了！

用官方驱动动，就不能用系统里自带的受限驱动！

你按我那个帖子里的方法，把系统里的所有的驱动清理干净再重新安装驱动吧

[kujian]

好的，明白了。谢谢