我的机子配置: P4-506 2.66GHz
技嘉915的主板
昂达的显卡
硬盘ST3800 80G
用光盘安装的时候,启动到此处就卡住了
Loading essential drivers OK
Mounting root file system...
请问这是什么原因,怎么解决?谢谢
光盘安装在“Mounting root file system”停住了(已解决)
版面规则
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
-
- 帖子: 24
- 注册时间: 2006-05-06 11:48
光盘安装在“Mounting root file system”停住了(已解决)
上次由 thorium 在 2006-08-19 9:45,总共编辑 1 次。
-
- 帖子: 117
- 注册时间: 2006-08-12 14:56
- 来自: GD SG SX
- 联系:
-
- 帖子: 24
- 注册时间: 2006-05-06 11:48
-
- 帖子: 24
- 注册时间: 2006-05-06 11:48
问题已解决
具体原因目前不明,有好几种解决方案,具体参照ubuntu英文论坛
http://www.ubuntuforums.org/showpost.ph ... stcount=11
经常linux的人英语水平应该可以过关吧
其它的我就不译了,只说说我的做法,进入安装选择页面,停在第一个选项上面 F6 然后在最后面(--的后面)加上 acpi=off 回车,OK! 这种方法适合我, 如果不行,可以试试其它的。 好运哦!!
Quote:
具体原因目前不明,有好几种解决方案,具体参照ubuntu英文论坛
http://www.ubuntuforums.org/showpost.ph ... stcount=11
经常linux的人英语水平应该可以过关吧
其它的我就不译了,只说说我的做法,进入安装选择页面,停在第一个选项上面 F6 然后在最后面(--的后面)加上 acpi=off 回车,OK! 这种方法适合我, 如果不行,可以试试其它的。 好运哦!!
Quote:
Beware that the different workarounds are in no particular order and as such it might not be better to try the first first. Rather read the entire list and try those which make sense on your setup(No point in trying to remove USB devices if non are attached).
* Use evms_activate -- I couldn't get this to work but it only seems that this worked for shoeshinecs give his instructions a look here: http://www.ubuntuforums.org/showpost...25&postcount=3
* Remove all USB devices -- Didn't work for me, but worked for several people. A number of people have responded that this is not an option since they need their USB devices. Please beware that according to PirahnaBreaks after the installer had booted he could plug in all his USB devices again. He also reported that he had no problems when he tried to boot the installed system with USB devices plugged in. http://ubuntuforums.org/showpost.php...6&postcount=45
* Disable USB2 in the BIOS -- I didn't try this, but it should be related to the solution mentioned above
* Just wait -- This seemed to work for a number of people, after waiting for 10 or more minutes with errors, the installer suddenly contined. However this didn't work for me
* Give irqpoll as a boot option -- This worked for some including me, others have reported that it helped to use noapic and nolapic too. I still had to wait a few minutes like in the solution above. Other boot options of use might be acpi=off pci=noacpi noacpi
* bobt reported that for him none of the above boot options worked, but instead adding ide=nodma as a boot option worked.
* Patrick mentioned adding root= as a boot option had worked for him -- I haven't tried this but apparently it gave him problems when trying to boot the installed system. However these problems were solved by following ubuntu_demon's guide in the following post http://www.ubuntuforums.org/showpost...7&postcount=76
* Using a different CD drive -- I haven't tried this but it would sound logical since it arises from those Buffer I/O errors on the CD-rom drive. It also worked for Xombox's set of errors. I don't know if the drive will be usable after install though.
* If all else fails the alternate install disc should work.
* Mjziegle mentioned something about a raid problem of his which had simmilar symptoms, http://www.ubuntuforums.org/showpost...1&postcount=65
If anybody has any additional fixes or tips please either post them at this thread: http://www.ubuntuforums.org/showthread.php?t=186115 or PM me then I will try to keep this post up to date.
I hope this will be of help to some of you.
-
- 帖子: 10
- 注册时间: 2006-08-08 12:17