求助:网页上黑影盖住文字,用鼠标一划就清楚了。
- 枕戈待旦
- 帖子: 140
- 注册时间: 2009-01-23 17:02
求助:网页上黑影盖住文字,用鼠标一划就清楚了。
打开网页之后,有好多黑影成片地盖住了文字,用鼠标一划就好了,但鼠标一离开就恢复了。该怎样解决?感谢!
上次由 枕戈待旦 在 2009-02-18 18:56,总共编辑 1 次。
- Terpineol
- 帖子: 1230
- 注册时间: 2007-12-09 14:35
- Terpineol
- 帖子: 1230
- 注册时间: 2007-12-09 14:35
- 枕戈待旦
- 帖子: 140
- 注册时间: 2009-01-23 17:02
Re: 求助:网页上黑影盖住文字,用鼠标一划就清楚了。
UBUNTU 抓的图传不了。。。。。。退回XP就无法截问题图了。。。。。。真烦人!
- leeaman
- 帖子: 30702
- 注册时间: 2007-02-02 18:14
- 系统: debian sid
Re: 求助:网页上黑影盖住文字,用鼠标一划就清楚了。
ubuntu默认抓图是png的格式什么不行呢?实在不行用gimp转一下格式也不是很麻烦啊!
醉了星星,醉月亮●●●●●The Long Way To Go(*^_^*)
- 枕戈待旦
- 帖子: 140
- 注册时间: 2009-01-23 17:02
Re: 求助:网页上黑影盖住文字,用鼠标一划就清楚了。
硬件驱程(显卡NVIDIA)我卸载了,又重装了,重启后还是不行。请问这是哪里出了问题?
- 枕戈待旦
- 帖子: 140
- 注册时间: 2009-01-23 17:02
- syrano
- 帖子: 4313
- 注册时间: 2007-10-06 18:40
Re: 求助:网页上黑影盖住文字,用鼠标一划就清楚了。
E=m c^2
- wangdu2002
- 帖子: 13284
- 注册时间: 2008-12-13 19:39
- 来自: 物华天宝人杰地灵
Re: 求助:网页上黑影盖住文字,用鼠标一划就清楚了。
和我的机器一样,我的机器也是老显卡,不过没事,改用开源驱动就万事OK了。
在xorg.conf里把nividia换成nv就变成开源驱动了。
在xorg.conf里把nividia换成nv就变成开源驱动了。
行到水穷处,坐看云起时。
海内生明月,天涯共此夕。
--------------------吾本独!
海内生明月,天涯共此夕。
--------------------吾本独!
- syrano
- 帖子: 4313
- 注册时间: 2007-10-06 18:40
Re: 求助:网页上黑影盖住文字,用鼠标一划就清楚了。
不过这样,就没有3D了。我一直都要开compiz的。wangdu2002 写了:和我的机器一样,我的机器也是老显卡,不过没事,改用开源驱动就万事OK了。
在xorg.conf里把nividia换成nv就变成开源驱动了。
E=m c^2
- 枕戈待旦
- 帖子: 140
- 注册时间: 2009-01-23 17:02
Re: 求助:网页上黑影盖住文字,用鼠标一划就清楚了。
我重装了UBUNTU,但还是不行,估计显卡不好。取消3D会解决问题吗?
- wangdu2002
- 帖子: 13284
- 注册时间: 2008-12-13 19:39
- 来自: 物华天宝人杰地灵
Re: 求助:网页上黑影盖住文字,用鼠标一划就清楚了。
没错,我的电脑就只是工作和学习所用,因此从不开3D,只使用开源驱动。要想玩游戏,当然Win强多了。
给我的Xorg.conf给你参考下:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder57) Mon Oct 27 14:37:20 PST 2008
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "nv"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
DefaultDepth 24
Option "NoLogo" "True"
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768"
EndSubSection
EndSection
如果是MX400显卡,把这个文件CP到/etc/X11/下,覆盖原来的xorg.conf文件就行了。
给我的Xorg.conf给你参考下:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder57) Mon Oct 27 14:37:20 PST 2008
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "nv"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
DefaultDepth 24
Option "NoLogo" "True"
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768"
EndSubSection
EndSection
如果是MX400显卡,把这个文件CP到/etc/X11/下,覆盖原来的xorg.conf文件就行了。
行到水穷处,坐看云起时。
海内生明月,天涯共此夕。
--------------------吾本独!
海内生明月,天涯共此夕。
--------------------吾本独!
-
- 帖子: 17
- 注册时间: 2007-11-19 13:36
Re: 求助:网页上黑影盖住文字,用鼠标一划就清楚了。
把字体改为"文泉驿-正黑"